adnix42 Posted August 26, 2018 Share Posted August 26, 2018 I have had a problem lately where when I start taxing the server, such as during video encoding the server will just turn off. The light on the tower turns off and everything. I've tried re-seating all components but that hasn't helped. I started Fix Common Problems logging as well as have the a running diagnostic, both are attached. I don't see any notification of shutdowns in them. There is a memory slot on the motherboard that isn't detecting DIMMs, so I am looking to RMA it. But in the mean time it seems to run fine until I push the machine. Any thoughts would be appreciated. tower-diagnostics-20180825-1956.zip FCPsyslog_tail.txt Quote Link to comment
pwm Posted August 26, 2018 Share Posted August 26, 2018 Do you have any other PSU to test with? PSU and proper cooling of CPU/motherboard are the main suspects. Quote Link to comment
adnix42 Posted August 26, 2018 Author Share Posted August 26, 2018 I'm using a brand new PSU 2 weeks ago that was functioning on different hardware without a problem. As for temps, I have 4 case fans and 2 Arctic coolers on the CPUs, but I had a temp monitor open and running before it went down and the last reading had the CPUs between 54c and 70c, EXCEPT for the monitor on the chipset which reported 109c, which seems high and might be my culprit. I've never had to deal with bad cooling on the on-board chipset. Is there even a market for replacement coolers for that? I'm thinking that since I'll be getting the board replaced I should see what the new one runs at. Quote Link to comment
pwm Posted August 26, 2018 Share Posted August 26, 2018 109 °C for the motherboard??? You do have air circulating in the case? Quote Link to comment
adnix42 Posted August 26, 2018 Author Share Posted August 26, 2018 Yea.... I have 4 case fans pushing air from the front to back. And its running right now, at idle, at 101 while the cpus are still at 65-70. Either the sensor is bad or there is something wrong with the chip or heatsink. I guess I should try re-seating the stock cooler on the chipset? Quote Link to comment
Zonediver Posted August 27, 2018 Share Posted August 27, 2018 (edited) You have 4 fans for blowing into the case - how many fans will blow the hot air out of the case? About "stock cooler on chipset": Do you mean the CPU-Cooler? If your Mainboard has "really" 109° then there is something wrong... Edited August 27, 2018 by Zonediver Quote Link to comment
MMW Posted August 27, 2018 Share Posted August 27, 2018 I would agree that two in front and two in back all pushing air would probably give a better air flow. Also, I would check the cable management to ensure none of them is covering over or blocking the air flow. I know it's obvious but check the airflow arrows on the fans are all pointing the right way, also you don't have any fan control software running do you? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.