Fffrank Posted September 6, 2018 Share Posted September 6, 2018 This is ALL new to me so excuse the dumb questions -- I'll be firing up UNRAID this week and want to make sure that my understanding of my hardware is correct. I purchased a DL380 G7 off of eBay. It's a 24bay sff unit. It showed up with a PCIe p410i RAID controller. The 24bay backplanes require 4x SAS cables. Two of these are connected to the PCIe card and 2 are connected to the mainboard. I also ordered a HP H220 HBA PCIe card. It's my understanding that I needed that to correctly use UNRAID in JBOD mode -- but there are only 2 ports on that card. Can I use some type of SAS splitter or do I need to buy an SAS expander? Either option is inexpensive I just want to make sure I have everything that I need to set myself up for success. Quote Link to comment
ken-ji Posted September 6, 2018 Share Posted September 6, 2018 You already said the answer yourself. But you need to check if the onboard port supports JBOD. 2 hours ago, Fffrank said: Two of these are connected to the PCIe card and 2 are connected to the mainboard. Now if you need one or more ports... you'll need to either get another HBA (or a different HBA with 4 ports) or a SAS expander. There is no such thing as a SAS splitter. 1 Quote Link to comment
1812 Posted September 7, 2018 Share Posted September 7, 2018 3 hours ago, Fffrank said: This is ALL new to me so excuse the dumb questions -- I'll be firing up UNRAID this week and want to make sure that my understanding of my hardware is correct. I purchased a DL380 G7 off of eBay. It's a 24bay sff unit. It showed up with a PCIe p410i RAID controller. The 24bay backplanes require 4x SAS cables. Two of these are connected to the PCIe card and 2 are connected to the mainboard. I also ordered a HP H220 HBA PCIe card. It's my understanding that I needed that to correctly use UNRAID in JBOD mode -- but there are only 2 ports on that card. Can I use some type of SAS splitter or do I need to buy an SAS expander? Either option is inexpensive I just want to make sure I have everything that I need to set myself up for success. sas cables from the hbt to the sas ports on the backplane. if you have more than 2, you will need an sas expander. I was using an hp sas expander (2 in 2 different servers,) but all of them started acting goofy on me (I think they hated my md1000 which was basically another expander.) The intel expanders some people on here use seem to do a good job still, but I don't use an expander anymore. to use all bays now, as mentioned before, you'll either need an additional hba, on with 4 ports, or an expander. OR you can try to use the p410i in conjunction with the h220. but it will only make individual raid 0 logical drives and those can be a pain to recover if something bad happen (plus i think you lose out on disk temp monitoring in unRaid.) proliant tips/tricks are in my sig (assuming you have turned on forum signatures) welcome and good luck! 1 Quote Link to comment
Fffrank Posted September 7, 2018 Author Share Posted September 7, 2018 Thanks to both of you. Very helpful info. @1812 I'll check out your thread. Any info you might have on quieting down fans would be appreciated. Mine aren't racing -- they come down about 50% after I boot -- but they do make more noise (and use more power) than I'd like. My usage on this box will be pretty low (it's replacing an Odroid C2 "server" that I've been running) so I don't see any reason to keep the jets fired up when it's mostly going to spend its days idling. Quote Link to comment
1812 Posted September 7, 2018 Share Posted September 7, 2018 14 minutes ago, Fffrank said: Thanks to both of you. Very helpful info. @1812 I'll check out your thread. Any info you might have on quieting down fans would be appreciated. Mine aren't racing -- they come down about 50% after I boot -- but they do make more noise (and use more power) than I'd like. My usage on this box will be pretty low (it's replacing an Odroid C2 "server" that I've been running) so I don't see any reason to keep the jets fired up when it's mostly going to spend its days idling. usually a bios change can help with that. the updated one with the spectre fixes seems to have helped a few others in getting fan speeds lower, but they are still audible. It'll never be "desktop" quiet unless you use a capacitor/resistor or replace the fans, both of which I didn't do (instead I got an isobox sound reducing rack.) Quote Link to comment
Fffrank Posted September 7, 2018 Author Share Posted September 7, 2018 25 minutes ago, 1812 said: usually a bios change can help with that. the updated one with the spectre fixes seems to have helped a few others in getting fan speeds lower, but they are still audible. It'll never be "desktop" quiet unless you use a capacitor/resistor or replace the fans, both of which I didn't do (instead I got an isobox sound reducing rack.) Understood. I don't mind fan noise but it seems quite unnecessary at current levels. Obviously I can't obtain a SPP directly from HP but is there any risk in breaking something upgrading to another one that I can (hopefully) find? Quote Link to comment
1812 Posted September 7, 2018 Share Posted September 7, 2018 6 hours ago, Fffrank said: Understood. I don't mind fan noise but it seems quite unnecessary at current levels. Obviously I can't obtain a SPP directly from HP but is there any risk in breaking something upgrading to another one that I can (hopefully) find? you can get the latest with the spectre mitigation for free from HP through their website. The bios has a running version and backup section. So if you bork one, you can switch to the backup. After hitting f9 during boot, it drops you into the bios menu and will tell you the dates/numbers of each. You just have to decide which you want to upgrade: the curently running one or what is probably the original factory backup. If you want to keep the current, you have to switch to backup before updating. There is always a risk that something can go wrong updating any bios on any machine, but you're dealing with enterprise equipment, and I would hope that it's upgrade procedure is thoroughly tested before rolled out, otherwise HP is going to have several multi-million dollar customers angry at them. Quote Link to comment
Fffrank Posted September 9, 2018 Author Share Posted September 9, 2018 Borrowed an spp disk from a friend. It was 17.04 but seems to have updated some items. I also installed an HP SAS expander and 2x4tb drives. Unfortunately the drives didn't just automatically show up in UNRAID. How do I troubleshoot that? Quote Link to comment
1812 Posted September 9, 2018 Share Posted September 9, 2018 46 minutes ago, Fffrank said: Borrowed an spp disk from a friend. It was 17.04 but seems to have updated some items. I also installed an HP SAS expander and 2x4tb drives. Unfortunately the drives didn't just automatically show up in UNRAID. How do I troubleshoot that? what is the expander hooked up to? backplane and ? Quote Link to comment
Fffrank Posted September 9, 2018 Author Share Posted September 9, 2018 Haha I told you I was new to this! I thought the expander communicated to the controller via PCIe. Now that I've hooked it up to the HBA everything seems to be working correctly. 1 Quote Link to comment
1812 Posted September 9, 2018 Share Posted September 9, 2018 8 hours ago, Fffrank said: Haha I told you I was new to this! I thought the expander communicated to the controller via PCIe. Now that I've hooked it up to the HBA everything seems to be working correctly. We all had to start somewhere, so no worries. Quote Link to comment
Fffrank Posted September 20, 2018 Author Share Posted September 20, 2018 I seem to be up and running -- I'm currently copying my data over but my log is FULL of these messages (performance doesn't seem to be suffering too much but this can't be good!) Sep 20 10:51:15 Hippo kernel: ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20170728/exfield-427) Sep 20 10:51:15 Hippo kernel: ACPI Error: Method parse/execution failed \_SB.PMI0._PMM, AE_AML_BUFFER_LIMIT (20170728/psparse-550) Sep 20 10:51:15 Hippo kernel: ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20170728/power_meter-338) Sep 20 10:51:16 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:16 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:16 Hippo kernel: mdcmd (70131): spindown 3 Sep 20 10:51:16 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:16 Hippo kernel: mdcmd (70132): spindown 4 Sep 20 10:51:16 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:17 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:17 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:17 Hippo kernel: mdcmd (70133): spindown 3 Sep 20 10:51:17 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:17 Hippo kernel: mdcmd (70134): spindown 4 Sep 20 10:51:17 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:18 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:18 Hippo kernel: mdcmd (70135): spindown 3 Sep 20 10:51:18 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:18 Hippo kernel: mdcmd (70136): spindown 4 Sep 20 10:51:18 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:18 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:19 Hippo kernel: mdcmd (70137): spindown 3 Sep 20 10:51:19 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:19 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:19 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:19 Hippo kernel: mdcmd (70138): spindown 4 Sep 20 10:51:19 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:20 Hippo kernel: mdcmd (70139): spindown 3 Sep 20 10:51:20 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:20 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:20 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:20 Hippo kernel: mdcmd (70140): spindown 4 Sep 20 10:51:20 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:21 Hippo kernel: mdcmd (70141): spindown 3 Sep 20 10:51:21 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:21 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:21 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:21 Hippo kernel: mdcmd (70142): spindown 4 Sep 20 10:51:21 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:22 Hippo kernel: mdcmd (70143): spindown 3 Sep 20 10:51:22 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:22 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:22 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:22 Hippo kernel: mdcmd (70144): spindown 4 Sep 20 10:51:22 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:23 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:23 Hippo kernel: mdcmd (70145): spindown 3 Sep 20 10:51:23 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:23 Hippo kernel: mdcmd (70146): spindown 4 Sep 20 10:51:23 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:23 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:24 Hippo kernel: mdcmd (70147): spindown 3 Sep 20 10:51:24 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:24 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:24 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:24 Hippo kernel: mdcmd (70148): spindown 4 Sep 20 10:51:24 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:25 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:25 Hippo kernel: mdcmd (70149): spindown 3 Sep 20 10:51:25 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:25 Hippo kernel: mdcmd (70150): spindown 4 Sep 20 10:51:25 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:25 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:26 Hippo kernel: mdcmd (70151): spindown 3 Sep 20 10:51:26 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:26 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:26 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:26 Hippo kernel: mdcmd (70152): spindown 4 Sep 20 10:51:26 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:26 Hippo kernel: ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20170728/exfield-427) Sep 20 10:51:26 Hippo kernel: ACPI Error: Method parse/execution failed \_SB.PMI0._PMM, AE_AML_BUFFER_LIMIT (20170728/psparse-550) Sep 20 10:51:26 Hippo kernel: ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20170728/power_meter-338) Sep 20 10:51:27 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:27 Hippo kernel: mdcmd (70153): spindown 3 Sep 20 10:51:27 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:27 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:27 Hippo kernel: mdcmd (70154): spindown 4 Sep 20 10:51:27 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:28 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:28 Hippo kernel: mdcmd (70155): spindown 3 Sep 20 10:51:28 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:28 Hippo kernel: mdcmd (70156): spindown 4 Sep 20 10:51:28 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:28 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:29 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:29 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:29 Hippo kernel: mdcmd (70157): spindown 3 Sep 20 10:51:29 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:29 Hippo kernel: mdcmd (70158): spindown 4 Sep 20 10:51:29 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:30 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:30 Hippo kernel: mdcmd (70159): spindown 3 Sep 20 10:51:30 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:30 Hippo kernel: mdcmd (70160): spindown 4 Sep 20 10:51:30 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:30 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:31 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:31 Hippo kernel: mdcmd (70161): spindown 3 Sep 20 10:51:31 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:31 Hippo kernel: mdcmd (70162): spindown 4 Sep 20 10:51:31 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:31 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:32 Hippo kernel: mdcmd (70163): spindown 3 Sep 20 10:51:32 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:32 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:32 Hippo kernel: mdcmd (70164): spindown 4 Sep 20 10:51:32 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:32 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:33 Hippo kernel: mdcmd (70165): spindown 3 Sep 20 10:51:33 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:33 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:33 Hippo kernel: mdcmd (70166): spindown 4 Sep 20 10:51:33 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:33 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:34 Hippo kernel: mdcmd (70167): spindown 3 Sep 20 10:51:34 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:34 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:34 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:34 Hippo kernel: mdcmd (70168): spindown 4 Sep 20 10:51:34 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:35 Hippo kernel: mdcmd (70169): spindown 3 Sep 20 10:51:35 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:35 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:35 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:35 Hippo kernel: mdcmd (70170): spindown 4 Sep 20 10:51:35 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:36 Hippo kernel: mdcmd (70171): spindown 3 Sep 20 10:51:36 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:36 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:36 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:36 Hippo kernel: mdcmd (70172): spindown 4 Sep 20 10:51:36 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:37 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:37 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:37 Hippo kernel: mdcmd (70173): spindown 3 Sep 20 10:51:37 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:37 Hippo kernel: mdcmd (70174): spindown 4 Sep 20 10:51:37 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:37 Hippo kernel: ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20170728/exfield-427) Sep 20 10:51:37 Hippo kernel: ACPI Error: Method parse/execution failed \_SB.PMI0._PMM, AE_AML_BUFFER_LIMIT (20170728/psparse-550) Sep 20 10:51:37 Hippo kernel: ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20170728/power_meter-338) Sep 20 10:51:38 Hippo kernel: mdcmd (70175): spindown 3 Sep 20 10:51:38 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:38 Hippo kernel: mdcmd (70176): spindown 4 Sep 20 10:51:38 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:38 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:38 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:39 Hippo kernel: mdcmd (70177): spindown 3 Sep 20 10:51:39 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:39 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:39 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:39 Hippo kernel: mdcmd (70178): spindown 4 Sep 20 10:51:39 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:40 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:40 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:40 Hippo kernel: mdcmd (70179): spindown 3 Sep 20 10:51:40 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:40 Hippo kernel: mdcmd (70180): spindown 4 Sep 20 10:51:40 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:40 Hippo kernel: ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20170728/exfield-427) Sep 20 10:51:40 Hippo kernel: ACPI Error: Method parse/execution failed \_SB.PMI0._PMM, AE_AML_BUFFER_LIMIT (20170728/psparse-550) Sep 20 10:51:40 Hippo kernel: ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20170728/power_meter-338) Sep 20 10:51:41 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:41 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:41 Hippo kernel: mdcmd (70181): spindown 3 Sep 20 10:51:41 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:41 Hippo kernel: mdcmd (70182): spindown 4 Sep 20 10:51:41 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:42 Hippo kernel: mdcmd (70183): spindown 3 Sep 20 10:51:42 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:42 Hippo kernel: mdcmd (70184): spindown 4 Sep 20 10:51:42 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:42 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:42 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:43 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:43 Hippo kernel: mdcmd (70185): spindown 3 Sep 20 10:51:43 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:43 Hippo kernel: mdcmd (70186): spindown 4 Sep 20 10:51:43 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:43 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:44 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:44 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:44 Hippo kernel: mdcmd (70187): spindown 3 Sep 20 10:51:44 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:44 Hippo kernel: mdcmd (70188): spindown 4 Sep 20 10:51:44 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:45 Hippo kernel: mdcmd (70189): spindown 3 Sep 20 10:51:45 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:45 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:45 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:45 Hippo kernel: mdcmd (70190): spindown 4 Sep 20 10:51:45 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:46 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:46 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:46 Hippo kernel: mdcmd (70191): spindown 3 Sep 20 10:51:46 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:46 Hippo kernel: mdcmd (70192): spindown 4 Sep 20 10:51:46 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:46 Hippo kernel: ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20170728/exfield-427) Sep 20 10:51:46 Hippo kernel: ACPI Error: Method parse/execution failed \_SB.PMI0._PMM, AE_AML_BUFFER_LIMIT (20170728/psparse-550) Sep 20 10:51:46 Hippo kernel: ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20170728/power_meter-338) Sep 20 10:51:47 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:47 Hippo kernel: mdcmd (70193): spindown 3 Sep 20 10:51:47 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:47 Hippo kernel: mdcmd (70194): spindown 4 Sep 20 10:51:47 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:47 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:48 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Quote Link to comment
1812 Posted September 20, 2018 Share Posted September 20, 2018 1 hour ago, Fffrank said: I seem to be up and running -- I'm currently copying my data over but my log is FULL of these messages (performance doesn't seem to be suffering too much but this can't be good!) Sep 20 10:51:15 Hippo kernel: ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20170728/exfield-427) Sep 20 10:51:15 Hippo kernel: ACPI Error: Method parse/execution failed \_SB.PMI0._PMM, AE_AML_BUFFER_LIMIT (20170728/psparse-550) Sep 20 10:51:15 Hippo kernel: ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20170728/power_meter-338) Sep 20 10:51:16 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:16 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:16 Hippo kernel: mdcmd (70131): spindown 3 Sep 20 10:51:16 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:16 Hippo kernel: mdcmd (70132): spindown 4 Sep 20 10:51:16 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:17 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:17 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:17 Hippo kernel: mdcmd (70133): spindown 3 Sep 20 10:51:17 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:17 Hippo kernel: mdcmd (70134): spindown 4 Sep 20 10:51:17 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:18 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:18 Hippo kernel: mdcmd (70135): spindown 3 Sep 20 10:51:18 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:18 Hippo kernel: mdcmd (70136): spindown 4 Sep 20 10:51:18 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:18 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:19 Hippo kernel: mdcmd (70137): spindown 3 Sep 20 10:51:19 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:19 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:19 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:19 Hippo kernel: mdcmd (70138): spindown 4 Sep 20 10:51:19 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:20 Hippo kernel: mdcmd (70139): spindown 3 Sep 20 10:51:20 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:20 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:20 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:20 Hippo kernel: mdcmd (70140): spindown 4 Sep 20 10:51:20 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:21 Hippo kernel: mdcmd (70141): spindown 3 Sep 20 10:51:21 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:21 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:21 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:21 Hippo kernel: mdcmd (70142): spindown 4 Sep 20 10:51:21 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:22 Hippo kernel: mdcmd (70143): spindown 3 Sep 20 10:51:22 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:22 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:22 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:22 Hippo kernel: mdcmd (70144): spindown 4 Sep 20 10:51:22 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:23 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:23 Hippo kernel: mdcmd (70145): spindown 3 Sep 20 10:51:23 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:23 Hippo kernel: mdcmd (70146): spindown 4 Sep 20 10:51:23 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:23 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:24 Hippo kernel: mdcmd (70147): spindown 3 Sep 20 10:51:24 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:24 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:24 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:24 Hippo kernel: mdcmd (70148): spindown 4 Sep 20 10:51:24 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:25 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:25 Hippo kernel: mdcmd (70149): spindown 3 Sep 20 10:51:25 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:25 Hippo kernel: mdcmd (70150): spindown 4 Sep 20 10:51:25 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:25 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:26 Hippo kernel: mdcmd (70151): spindown 3 Sep 20 10:51:26 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:26 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:26 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:26 Hippo kernel: mdcmd (70152): spindown 4 Sep 20 10:51:26 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:26 Hippo kernel: ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20170728/exfield-427) Sep 20 10:51:26 Hippo kernel: ACPI Error: Method parse/execution failed \_SB.PMI0._PMM, AE_AML_BUFFER_LIMIT (20170728/psparse-550) Sep 20 10:51:26 Hippo kernel: ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20170728/power_meter-338) Sep 20 10:51:27 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:27 Hippo kernel: mdcmd (70153): spindown 3 Sep 20 10:51:27 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:27 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:27 Hippo kernel: mdcmd (70154): spindown 4 Sep 20 10:51:27 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:28 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:28 Hippo kernel: mdcmd (70155): spindown 3 Sep 20 10:51:28 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:28 Hippo kernel: mdcmd (70156): spindown 4 Sep 20 10:51:28 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:28 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:29 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:29 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:29 Hippo kernel: mdcmd (70157): spindown 3 Sep 20 10:51:29 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:29 Hippo kernel: mdcmd (70158): spindown 4 Sep 20 10:51:29 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:30 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:30 Hippo kernel: mdcmd (70159): spindown 3 Sep 20 10:51:30 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:30 Hippo kernel: mdcmd (70160): spindown 4 Sep 20 10:51:30 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:30 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:31 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:31 Hippo kernel: mdcmd (70161): spindown 3 Sep 20 10:51:31 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:31 Hippo kernel: mdcmd (70162): spindown 4 Sep 20 10:51:31 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:31 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:32 Hippo kernel: mdcmd (70163): spindown 3 Sep 20 10:51:32 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:32 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:32 Hippo kernel: mdcmd (70164): spindown 4 Sep 20 10:51:32 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:32 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:33 Hippo kernel: mdcmd (70165): spindown 3 Sep 20 10:51:33 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:33 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:33 Hippo kernel: mdcmd (70166): spindown 4 Sep 20 10:51:33 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:33 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:34 Hippo kernel: mdcmd (70167): spindown 3 Sep 20 10:51:34 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:34 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:34 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:34 Hippo kernel: mdcmd (70168): spindown 4 Sep 20 10:51:34 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:35 Hippo kernel: mdcmd (70169): spindown 3 Sep 20 10:51:35 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:35 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:35 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:35 Hippo kernel: mdcmd (70170): spindown 4 Sep 20 10:51:35 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:36 Hippo kernel: mdcmd (70171): spindown 3 Sep 20 10:51:36 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:36 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:36 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:36 Hippo kernel: mdcmd (70172): spindown 4 Sep 20 10:51:36 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:37 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:37 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:37 Hippo kernel: mdcmd (70173): spindown 3 Sep 20 10:51:37 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:37 Hippo kernel: mdcmd (70174): spindown 4 Sep 20 10:51:37 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:37 Hippo kernel: ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20170728/exfield-427) Sep 20 10:51:37 Hippo kernel: ACPI Error: Method parse/execution failed \_SB.PMI0._PMM, AE_AML_BUFFER_LIMIT (20170728/psparse-550) Sep 20 10:51:37 Hippo kernel: ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20170728/power_meter-338) Sep 20 10:51:38 Hippo kernel: mdcmd (70175): spindown 3 Sep 20 10:51:38 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:38 Hippo kernel: mdcmd (70176): spindown 4 Sep 20 10:51:38 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:38 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:38 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:39 Hippo kernel: mdcmd (70177): spindown 3 Sep 20 10:51:39 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:39 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:39 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:39 Hippo kernel: mdcmd (70178): spindown 4 Sep 20 10:51:39 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:40 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:40 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:40 Hippo kernel: mdcmd (70179): spindown 3 Sep 20 10:51:40 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:40 Hippo kernel: mdcmd (70180): spindown 4 Sep 20 10:51:40 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:40 Hippo kernel: ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20170728/exfield-427) Sep 20 10:51:40 Hippo kernel: ACPI Error: Method parse/execution failed \_SB.PMI0._PMM, AE_AML_BUFFER_LIMIT (20170728/psparse-550) Sep 20 10:51:40 Hippo kernel: ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20170728/power_meter-338) Sep 20 10:51:41 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:41 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:41 Hippo kernel: mdcmd (70181): spindown 3 Sep 20 10:51:41 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:41 Hippo kernel: mdcmd (70182): spindown 4 Sep 20 10:51:41 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:42 Hippo kernel: mdcmd (70183): spindown 3 Sep 20 10:51:42 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:42 Hippo kernel: mdcmd (70184): spindown 4 Sep 20 10:51:42 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:42 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:42 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:43 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:43 Hippo kernel: mdcmd (70185): spindown 3 Sep 20 10:51:43 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:43 Hippo kernel: mdcmd (70186): spindown 4 Sep 20 10:51:43 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:43 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:44 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:44 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:44 Hippo kernel: mdcmd (70187): spindown 3 Sep 20 10:51:44 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:44 Hippo kernel: mdcmd (70188): spindown 4 Sep 20 10:51:44 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:45 Hippo kernel: mdcmd (70189): spindown 3 Sep 20 10:51:45 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:45 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:45 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:45 Hippo kernel: mdcmd (70190): spindown 4 Sep 20 10:51:45 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:46 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:46 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:46 Hippo kernel: mdcmd (70191): spindown 3 Sep 20 10:51:46 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:46 Hippo kernel: mdcmd (70192): spindown 4 Sep 20 10:51:46 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:46 Hippo kernel: ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20170728/exfield-427) Sep 20 10:51:46 Hippo kernel: ACPI Error: Method parse/execution failed \_SB.PMI0._PMM, AE_AML_BUFFER_LIMIT (20170728/psparse-550) Sep 20 10:51:46 Hippo kernel: ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20170728/power_meter-338) Sep 20 10:51:47 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:47 Hippo kernel: mdcmd (70193): spindown 3 Sep 20 10:51:47 Hippo kernel: md: do_drive_cmd: disk3: ATA_OP e0 ioctl error: -5 Sep 20 10:51:47 Hippo kernel: mdcmd (70194): spindown 4 Sep 20 10:51:47 Hippo kernel: md: do_drive_cmd: disk4: ATA_OP e0 ioctl error: -5 Sep 20 10:51:47 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write Sep 20 10:51:48 Hippo emhttpd: error: mdcmd, 2639: Input/output error (5): write ACPI error fix is listed in my sig in the proliant info. for the other error... correct me if I'm wrong but you're running the hba into the sas expander, then cabling back to your drive bays, right? If so, did you also disable the onboard p410i/whatever raid controller? those have been known to cause issues. this is just a wild guess. I don't know off the top of my head what it is, but it could also be a corrupt disk (implied by 20 seconds of google searching) so perhaps try checking the disk: https://wiki.unraid.net/Check_Disk_Filesystems#Checking_and_fixing_drives_in_the_webGui 1 Quote Link to comment
Fffrank Posted September 20, 2018 Author Share Posted September 20, 2018 1 hour ago, 1812 said: ACPI error fix is listed in my sig in the proliant info. for the other error... correct me if I'm wrong but you're running the hba into the sas expander, then cabling back to your drive bays, right? If so, did you also disable the onboard p410i/whatever raid controller? those have been known to cause issues. this is just a wild guess. I don't know off the top of my head what it is, but it could also be a corrupt disk (implied by 20 seconds of google searching) so perhaps try checking the disk: https://wiki.unraid.net/Check_Disk_Filesystems#Checking_and_fixing_drives_in_the_webGui Got it. Fixed the ACPI issue. And yes, I've disabled the onboard raid. My issue appears to be with SAS disks not spinning down in unraid. I've found threads that it was a known bug in previous versions but can't tell if it was supposed to have been fixed. Either way, disabling spindown eliminated the error messages. Quote Link to comment
JorgeB Posted September 20, 2018 Share Posted September 20, 2018 12 minutes ago, Fffrank said: I've found threads that it was a known bug in previous versions but can't tell if it was supposed to have been fixed. Not fixed yet, it's a known issue. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.