Jump to content

OpenVPN works but unable to access NAS and web


agppro

Recommended Posts

Hi there,

I've been able to setup OpenVPN for remote access. Everything works except one thing which is the most important. I cannot reach it either by WebUI or by any share.

(Using latest version of OpenVPN and UNraid)

Any clue on how to fix this?

Thanks in advance !

 

Link to comment

I use the pfSense OpenVPN wizard with all option by default but Enable NetBIOS over TCP/IP. When I use the VPN I can acces to windows SMB Shares and Local Web server on my LAN, only I can not acces to web and SMB Shares of unRAID.

 

I configured packet capture at pfSense and captured this:

 

23:01:32.020759 IP 10.0.10.2.52318 > 192.168.100.10.443: tcp 0
23:01:32.289012 IP 10.0.10.2.52320 > 192.168.100.10.443: tcp 0
23:01:33.040640 IP 10.0.10.2.52318 > 192.168.100.10.443: tcp 0
23:01:33.758910 IP 10.0.10.2.52320 > 192.168.100.10.443: tcp 0
23:01:35.053266 IP 10.0.10.2.52318 > 192.168.100.10.443: tcp 0
23:01:35.339469 IP 10.0.10.2.52320 > 192.168.100.10.443: tcp 0
23:01:39.278832 IP 10.0.10.2.52318 > 192.168.100.10.443: tcp 0
23:01:39.529129 IP 10.0.10.2.52320 > 192.168.100.10.443: tcp 0
23:01:47.470051 IP 10.0.10.2.52318 > 192.168.100.10.443: tcp 0
23:01:47.738716 IP 10.0.10.2.52320 > 192.168.100.10.443: tcp 0

 

 

On this post of 2017 have the same problem, and dont say the solution. Say the unraid team helps him but don't say the solution

 

https://community.spiceworks.com/topic/2012452-openvpn-works-but-unable-to-access-nas

 

 

Link to comment

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...