SMB Share Changes not Applying


tcwatson

Recommended Posts

When I go to make settings to a User Share - i.e., change the SMB Security to Private, or change the Use cache disk from No to Only, after clicking Apply my settings are reverted and not saved.

 

I've tried restarting the array in maintenance mode and rebooting the server, and the changes still persist. Any ideas?

 

Thanks

Link to comment

From your description it sounds as if there might be an issue with your USB drive?

 

if you provide the diagnostics zip file (obtained via Tools->Diagnostics) that will provide information that others can examine as to whether this might be the case.   Ideally you could give an idea of the time when you tried to make such a change to help with pinpointing the area of the logs in the diagnostics that are likely to beof most intetest.

Link to comment

So I checked in the syslog and I see many lines of this repeated. Attached the full diags. I'm not using a USB drive at the moment.

 

Sep 12 20:46:08 Tower emhttpd: error: put_config_idx, 609: Read-only file system (30): fopen: /boot/config/shares/vrideos.cfg
Sep 12 20:46:08 Tower emhttpd: Starting services...
Sep 12 20:46:09 Tower emhttpd: error: put_config_idx, 609: Read-only file system (30): fopen: /boot/config/shares/vrideos.cfg
Sep 12 20:46:09 Tower emhttpd: Starting services...
Sep 12 20:46:10 Tower emhttpd: error: put_config_idx, 609: Read-only file system (30): fopen: /boot/config/shares/vrideos.cfg

 

tower-diagnostics-20180912-2047.zip

Edited by tcwatson
Link to comment
5 minutes ago, tcwatson said:

Ha, oops. 

 

I made the USB stick months ago... Pretty sure I just followed the directions from https://lime-technology.com/getting-started/

I had changed shares settings in the past without issue, but it's been a while so I'm not sure what could have changed.

 

It happens from time to time.  You created the USB drive properly but some error has now put it in read-only mode.  This has happened to me a couple of times as well.  Simply remove the USB flash drive from the server, put it in a Windows machine and run chkdsk on it.  This has fixed the read-only situation for me every time.

Edited by Hoopster
Link to comment
11 minutes ago, Hoopster said:

It happens from time to time.  You created the USB drive properly but some error has now put it in read-only mode.  This has happened to me a couple of times as well.  Simply remove the USB flash drive from the server, put it in a Windows machine and run chkdsk on it.  This has fixed the read-only situation for me every time.

This worked for me. Thanks!

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.