September 15, 20187 yr Version 6.5.3 Lost power last night and when the server came back on, the array was stopped with a stale configuration. It shows all disks as missing and no devices from the drop down to assign. Unassigned devices show nothing. Tried rebooting and even powering off and back on. Do I need to just do a New Config and assign the disk's back to where they were? I also have the Dynamix System Buttons installed. Should I try starting the array from there? In the main tab, the start button is greyed out. Edited September 15, 20187 yr by Daax11
September 15, 20187 yr Author Please forgive the dumb question. The only way to check the BIOS would be to connect a separate monitor and keyboard to the server? There aren't any tools in UnRaid to check this?
September 15, 20187 yr Please post your diagnostics but if no disks are being detect by the board/controller they can't be detected by Unraid
September 15, 20187 yr Author Good news! I got everything working. For some reason my SAS controller became disabled in my BIOS settings. I was able to enable it and UnRaid was able to start the array. Thanks everyone for your help.
Archived
This topic is now archived and is closed to further replies.