bonienl Posted September 22, 2018 Share Posted September 22, 2018 45 minutes ago, BCinBC said: Custom: br0 Needed for Unifi, & PiHole. It also seemed to kill Splunk, which is just a Bridge connection. So how does one create a new External IP for a docker with 6.6? What is the output of docker network ls Quote Link to comment
michael123 Posted September 22, 2018 Share Posted September 22, 2018 Upgrade from 6.5.3 on my box to 6.6.0 went smoothly, and system log is clean. BUT.. I really don't like the new GUI. Will be nice if that will be possible to have an option to revert it. 1 Quote Link to comment
itimpi Posted September 22, 2018 Share Posted September 22, 2018 1 hour ago, michael123 said: Upgrade from 6.5.3 on my box to 6.6.0 went smoothly, and system log is clean. BUT.. I really don't like the new GUI. Will be nice if that will be possible to have an option to revert it. I do not think we are going to get Limetech to revert, and maintaining multiple GUI’s is a significant overhead I would think. Having said that if you select the Azure or Grey options they are currently still using the old style. 1 Quote Link to comment
michael123 Posted September 22, 2018 Share Posted September 22, 2018 (edited) 25 minutes ago, itimpi said: I do not think we are going to get Limetech to revert, and maintaining multiple GUI’s is a significant overhead I would think. Having said that if you select the Azure or Grey options they are currently still using the old style. No, probably that was in RC, now it is all the same. But I'll get used to, in the end that's just a NAS OS (in my case). The more important thing that unraid is working for me stable for more than 10 years Edited September 22, 2018 by michael123 1 Quote Link to comment
trurl Posted September 22, 2018 Share Posted September 22, 2018 19 minutes ago, michael123 said: if you select the Azure or Grey options they are currently still using the old style. 19 minutes ago, michael123 said: No, probably that was in RC, now it is all the same. Azure looks like the old to me on 6.6, except for the logo. Quote Link to comment
perhansen Posted September 22, 2018 Share Posted September 22, 2018 Just updated both servers. One from 6.5.3 and one from 6.6.0-rc. Both went smooth and everything seems to work. Just had to remove CPU-pinning from my dockers. There is really alot i like in the new release. CPU-pinning is one of them and CPU-load and memory-load in dockers. I can remember that it was there a couple of versions back, but it went out somewhere along the way, therefore i installed cadvisior. I’am still getting use to the new gui, but i like its far more resposive than before. Now i just need to update my banner. Great job limetech, its still impressive how far the software has come. Keep up the good work. Sent from my iPhone using Tapatalk Quote Link to comment
trajpar Posted September 22, 2018 Share Posted September 22, 2018 Upgraded to 6.6, after a while the webGUI looks like this, I am still able to access my docker containers fine its just that the webGUI isn't working. This the only issue I've seen so far. Quote Link to comment
CrimsonTyphoon Posted September 22, 2018 Share Posted September 22, 2018 (edited) Upgraded to 6.6.0 last. Really like the CPU pinning but unfortunately had to roll back to 6.5.3 due to a few minor issues: Docker custom networks. Besides the standard br0, I also run br1.10 and br1.20, linked to my VLANs (10 and 20 respectively). br1.20 is the same subnet as br0, but with a different gateway (br0: 192.168.20.0/24 gateway 192.168.20.1, br1.10 192.168.10.0/24 gateway 192.168.10.1, br1.20 192.168.20.0/24 gateway 192.168.20.254) DHCP is off on all custom networks, I set them manually. After upgrading to 6.6.0, I could no longer select br1.20 as a custom network in docker, even though it was listed in my docker settings. Unfortunately, this was the deal breaker for me and I had to roll back. I presume I could have made in manually via the CLI, but was not up to that yet Theme - It has to grow on me, but I liked the only theme of 6.5.3 and below. I believe I just need new time with the new theme. Docker Autostart - I removed the CA Docker Autostart plugin, due to it not being compatible with 6.6.0. I could not find the option in 6.6.0 where to set delay timers and to change the order that dockers are started in. @Squid showed me were this was, thank you! I am going to upgrade back tonight and play around with the custom docker networks so I can get my br1.20. If someone could shed some light on this as well, it would be greatly appreciated. EDIT: Spun off docker issue here Edited September 23, 2018 by CrimsonTyphoon Added Link Quote Link to comment
trurl Posted September 22, 2018 Share Posted September 22, 2018 16 minutes ago, trajpar said: its just that the webGUI isn't working. This the only issue I've seen so far. Seems like a pretty important problem for you. Maybe only for you though. Since nobody else is reporting it and you haven't given us anything to work with I don't know. Quote Link to comment
Shyrka973 Posted September 22, 2018 Share Posted September 22, 2018 A bug with docker network ? Quote Link to comment
michael123 Posted September 22, 2018 Share Posted September 22, 2018 3 hours ago, trurl said: Azure looks like the old to me on 6.6, except for the logo. I don't like the new fonts and styling. A previous one to me appealed as a more elegant option. Regarding the version, I noticed quite fast transfer speeds. Was it expected? 1 Quote Link to comment
TheBekker Posted September 22, 2018 Share Posted September 22, 2018 Upgrade went without any issues, thanks! Regarding the "new" gui, it really dosnt work for me. I understand trying to hit the same branding as the website, but it seems a bit half baked to me. Those bright colored buttons/text on white backgrounds just isn't pretty or nice to read, i'd rather see an upgrade to using some responsive framework instead of a random splash of paint. Quote Link to comment
limetech Posted September 22, 2018 Author Share Posted September 22, 2018 re: webGUI themes: as I have said before, this is a work in process. My fault: we didn't give @bonienl a whole lot of time to theme-match with website. I made a business decision to release because there are important updates in 6.6 aside from the cosmetics. We know there are some things that need to change. But there is a fine line between constructive criticism and "piling on". New suggestions are welcome but all these "meeee toooo" posts are getting tiresome. 4 Quote Link to comment
michael123 Posted September 22, 2018 Share Posted September 22, 2018 5 minutes ago, limetech said: re: webGUI themes: as I have said before, this is a work in process. My fault: we didn't give @bonienl a whole lot of time to theme-match with website. I made a business decision to release because there are important updates in 6.6 aside from the cosmetics. We know there are some things that need to change. But there is a fine line between constructive criticism and "piling on". New suggestions are welcome but all these "meeee toooo" posts are getting tiresome. I am not a professional graphics designer. To me, as it was said also by others, UI elements do not play well in the eyes - the colors, the fonts. Regarding Release decision - you were absolutely right. 1 Quote Link to comment
limetech Posted September 22, 2018 Author Share Posted September 22, 2018 7 minutes ago, michael123 said: To me, as it was said also by others, UI elements do not play well in the eyes - the colors, the fonts Huh. First I've heard of it... Quote Link to comment
Squid Posted September 22, 2018 Share Posted September 22, 2018 3 hours ago, CrimsonTyphoon said: I could not find the option in 6.6.0 where to set delay timers and to change the order that dockers are started in. On the docker page, you can grab and slide the docker's "area" to move it up or down to change the start order. Delay Timer: Switch to advanced view, and then there's a "wait" entry you can change Quote Link to comment
bonienl Posted September 22, 2018 Share Posted September 22, 2018 (edited) 43 minutes ago, michael123 said: ...the fonts The GUI makes use of the Clear Sans font, developed by Intel. This is the description which goes with this font Clear Sans is a versatile OpenType font for screen, print, and Web. We designed Clear Sans with on-screen legibility and glanceability in mind. It strikes a balance between contemporary, professional, and stylish expression and thoroughly functional purpose. It has a sophisticated and elegant personality at all sizes, and its thoughtful design becomes even more evident at the thin weight. Clear Sans has minimized, unambiguous characters and slightly narrow proportions, making it ideal for UI design. Its strong, recognizable forms avoid distracting ambiguity, making Clear Sans comfortable for reading short UI labels and long passages in both screen and print. Honestly, I don't get (see) why some people have issues with this font. I did quite a lot of comparisons and in terms of readability this font is one of the best IMO. In addition the colors of the webGUI are the same as used on the official web site. Purposely the light background isn't made pure white and the dark background isn't made pure black to give less strain on the eyes. Edited September 22, 2018 by bonienl Quote Link to comment
perhansen Posted September 22, 2018 Share Posted September 22, 2018 At first I did not like the theme, but over time it's beginning to look great and with the black background it looks really cool. Sent from my iPhone using Tapatalk Quote Link to comment
perhansen Posted September 22, 2018 Share Posted September 22, 2018 Upgrade went without any issues, thanks! Regarding the "new" gui, it really dosnt work for me. I understand trying to hit the same branding as the website, but it seems a bit half baked to me. Those bright colored buttons/text on white backgrounds just isn't pretty or nice to read, i'd rather see an upgrade to using some responsive framework instead of a random splash of paint.Have you tried the black background?Sent from my iPhone using Tapatalk Quote Link to comment
jmonteiro Posted September 22, 2018 Share Posted September 22, 2018 I just tried the upgrade from 6.5.3 to 6.6 but my NFS mounts just hang when I do a "ls /nfs/path", no idea why This means I cannot run my dockers and I had to go back to 6.5.3 to keep them working. Any tips on how to solve this NFS issue? The NFS server is freenas, and it is does have the "Enable NFSv4" selected, and "Serve UDP NFS clients" un-selected. Thanks, Jorge Quote Link to comment
Katherine Posted September 22, 2018 Share Posted September 22, 2018 Browser: Chromium 67 Issue: My docker container layout is, for the lack of a better technical term, whacky. 😁 Quote Link to comment
trurl Posted September 22, 2018 Share Posted September 22, 2018 Just now, Katherine said: Browser: Chromium 67 Issue: My docker container layout is, for the lack of a better technical term, whacky. 😁 Since you didn't mention it, did you try clearing browser cache? Quote Link to comment
Katherine Posted September 22, 2018 Share Posted September 22, 2018 Just now, trurl said: Since you didn't mention it, did you try clearing browser cache? First thing I did. 😁 Quote Link to comment
local.bin Posted September 22, 2018 Share Posted September 22, 2018 (edited) 4 hours ago, bonienl said: Purposely the light background isn't made pure white and the dark background isn't made pure black to give less strain on the eyes. I do struggle with the lack of contrast, rather than the strain on the eyes, so orange against the off white background is tough for me, so I would choose a darker background if I could. The forum is great and gives the darker background with the white text, so a nice contrast. If it were possible to select a slightly darker middle section of the unraid view, it would be perfect The larger fonts work great for me with my aging eyes, so thanks for the hard work and getting this one out of the door so fast. Edit: I should add I have tried the other themes and prefer the layout of 'White' with just the orange on off white harder to read, but certainly not a show stopper for me. Edited September 22, 2018 by local.bin Quote Link to comment
daddygrant Posted September 22, 2018 Share Posted September 22, 2018 I updated but had to revert back. My Windows VM with HW GPU pass-through (Quadro P2000) was unable to start. I received the error "internal error: Unknown PCI header type '127' " I also checked the IOMMU Groups and even recreated a VM from scratch but it was still a no go. My system has one video card so I figured it was a reset bug.... I could be wrong. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.