wdelarme Posted September 26, 2018 Share Posted September 26, 2018 11 hours ago, wdelarme said: Will try this later..I need to update to 6.6 again 11 hours ago, wdelarme said: I installed with no problem everything ran great for a few hours then unraid wouldn't allow any connections from any machine on my network also couldnt get to GUI, Couldnt access shares or dockers but my pfsense vm was accessible....I had to init 6 the unraid box and upon reboot everything worked fine for a few hours and again same issue. I reverted back to previous version of unraid and all is fine. I tried updating again and a few hours later same issue so I had to init 6 the box again and everything worked fine again for a few hours. I'm now reverted back for the second time with previous unraid version and all is stable. Is there a specific log file I can get to when I update again for the third time that might help when I lose all connectivity besides my vm pfsense that I could post here to help? I did the update assistant and it said everything was ok to update just to verify it wasn't a known docker issue Ok added Diagnostics files tower-diagnostics-20180925-2138.zip . tower-diagnostics-20180925-2154.zip these are right after it died Quote Link to comment
grubFX Posted September 26, 2018 Share Posted September 26, 2018 6 hours ago, wdelarme said: Ok added Diagnostics files tower-diagnostics-20180925-2138.zip . tower-diagnostics-20180925-2154.zip these are right after it died In both cases one of the last entries in the stack trace is NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out ... meaning that something within the network driver of your eth0 pooped itself (as far as I understand; right?). Quote Link to comment
bonienl Posted September 26, 2018 Share Posted September 26, 2018 6 hours ago, wdelarme said: I installed with no problem everything ran great for a few hours then unraid wouldn't allow any connections from any machine on my network also couldnt get to GUI, The common denominator for people having connection problems is the use of a Realtek ethernet controller. Realtek has a history of miss and hit, and perhaps the latest kernel has a 'problematic' Realtek driver? You do have Intel ethernet controllers, possible to use one of these? Quote Link to comment
bnevets27 Posted September 26, 2018 Share Posted September 26, 2018 I can say that way back I was one of those with issues with a realtek NIC. It was a pain to figure out that it was the cause as it would do things like you're experiencing. Finally came to figuring it out that multiple concurrent transfers would cause a lock up/loss of network. A single transfer would be fine. Added an intel NIC and never had a problem after. Quote Link to comment
wdelarme Posted September 26, 2018 Share Posted September 26, 2018 26 minutes ago, bnevets27 said: I can say that way back I was one of those with issues with a realtek NIC. It was a pain to figure out that it was the cause as it would do things like you're experiencing. Finally came to figuring it out that multiple concurrent transfers would cause a lock up/loss of network. A single transfer would be fine. Added an intel NIC and never had a problem after. I use the intel nic for my pfsense vm. I will prob just not upgrade to the new version of unraid until this gets sorted out. 6.5.3 works flawlessly. Quote Link to comment
wdelarme Posted September 26, 2018 Share Posted September 26, 2018 3 hours ago, bnevets27 said: I can say that way back I was one of those with issues with a realtek NIC. It was a pain to figure out that it was the cause as it would do things like you're experiencing. Finally came to figuring it out that multiple concurrent transfers would cause a lock up/loss of network. A single transfer would be fine. Added an intel NIC and never had a problem after. This is exactly it! I have a quad port intel nic running all my pfsense stuff and an onboard realtek running the main unraid stuff. This explains why pfsense still works perfect when everything else dies. Is this something the unraid team can look into? I'm sure I'm not the only one using a realtek unboard nic Quote Link to comment
Frank1940 Posted September 26, 2018 Share Posted September 26, 2018 (edited) 27 minutes ago, wdelarme said: Is this something the unraid team can look into? I'm sure I'm not the only one using a realtek unboard nic I can only tell you that I had an issue with the RealTek drivers a few years back. LimeTech and I were involved with a behind-the-scene investigation. At that time, those drivers were a real mess. (...and I suspect that is still the case!!!) There were the drivers that were provided by the Linux team and a set of drivers for Linux from RealTek. With some releases, one set would work and not the other. On the next release, the reverse was true. Sometime, both sets would work... At that time, I was told that LimeTech was throwing in the towel on trying to figure out which way to hop and would release ALL future upgrades using only the drivers for the RealTek chip set that was provided by the Linux team. Edited September 26, 2018 by Frank1940 Quote Link to comment
wdelarme Posted September 26, 2018 Share Posted September 26, 2018 21 minutes ago, Frank1940 said: I can only tell you that I had an issue with the RealTek drivers a few years back. LimeTech and I were involved with a behind-the-scene investigation. At that time, those drivers were a real mess. (...and I suspect that is still the case!!!) There were the drivers that were provided by the Linux team and a set of drivers for Linux from RealTek. With some releases, one set would work and not the other. On the next release, the reverse was true. Sometime, both sets would work... At that time, I was told that LimeTech was throwing in the towel on trying to figure out which way to hop and would release ALL future upgrades using only the drivers for the RealTek chip set that was provided by the Linux team. I sent a message to UNRAID admins to see if this is something they want to mess with or if I should just wait until a new kernel comes out and try to go to 6.6.0 then Quote Link to comment
darkside40 Posted September 26, 2018 Share Posted September 26, 2018 Yep i know that, that was i think in the early days of unRaid 5. I experimented also with the r8168 and r8169 drivers, but i had no problems for ages with that Realtek Nic's. But it is definately a problem that has to be solved. I mean these nic's are used in appox. 80% of the Motherboards used worldwide and i think many of the unRaid users use them, although i am asking myself why only a few people report that problem here. Quote Link to comment
Stupifier Posted September 26, 2018 Share Posted September 26, 2018 Just wanted to congratulate the UnRAID team. This update seems to have made everything so much more snappy/responsive. Very happy customer. Thanks! Quote Link to comment
limetech Posted September 26, 2018 Author Share Posted September 26, 2018 54 minutes ago, Stupifier said: Just wanted to congratulate the UnRAID team. This update seems to have made everything so much more snappy/responsive. Very happy customer. Thanks! Thank you, good to have a pat on the back once in a while between the kicks in the rear 3 Quote Link to comment
Interstellar Posted September 26, 2018 Share Posted September 26, 2018 1 hour ago, Stupifier said: Just wanted to congratulate the UnRAID team. This update seems to have made everything so much more snappy/responsive. Very happy customer. Thanks! Indeed. In a time where most upgrades are becoming paid every year this is welcome. Almost getting to the point where I'll buy another pro license, just incase! Quote Link to comment
cybrnook Posted September 26, 2018 Share Posted September 26, 2018 (edited) On 9/25/2018 at 3:58 PM, bungee91 said: Admit to being out of the loop here, but I did search this topic without a clear answer. Does this release resolve the "nomodeset" need in the syslinux.cfg for Aspeed VGA becoming a funny color? I've removed it to test, but haven't booted into 6.6 as of yet. Currently on an X11SSM-F MB. +1 If you test, let me know please. Edited September 26, 2018 by cybrnook Quote Link to comment
Dazog Posted September 27, 2018 Share Posted September 27, 2018 (edited) Appears 4.18.10 is out with fix for crash on threadripper. PSP security. BUT 4.18.11 is supposed to have moar Spectre V2 stuff:https://www.phoronix.com/scan.php?page=news_item&px=More-Spectre-V2-SMT-IBPB-Leaks Intel finally updated there OOB Ethernet drivers to support 4.18 maybe? Edited September 27, 2018 by Dazog Quote Link to comment
limetech Posted September 27, 2018 Author Share Posted September 27, 2018 51 minutes ago, Dazog said: Intel finally updated there OOB Ethernet drivers to support 4.18 maybe? Nope. Quote Link to comment
limetech Posted September 27, 2018 Author Share Posted September 27, 2018 52 minutes ago, Dazog said: Appears 4.18.10 is out with fix for crash on threadripper. PSP security. Has this crash been reported by anyone here AFAYK? Quote Link to comment
Dazog Posted September 27, 2018 Share Posted September 27, 2018 (edited) 56 minutes ago, limetech said: Has this crash been reported by anyone here AFAYK? You guys patched the psp out: set CRYPTO_DEV_SP_PSP=N otherwise udev deadlocks on threadripper With 4.18.10 it's now fixed. no more PSP=N needed. Edited September 27, 2018 by Dazog 1 Quote Link to comment
666gene Posted September 27, 2018 Share Posted September 27, 2018 Id Also Like to thank the team for a great product. I appreciate the support over the years thanks. Quote Link to comment
ajgoyt Posted September 27, 2018 Share Posted September 27, 2018 Hello what forum would i post in for an issue with this latest version? Probably self induced but need help with my friends server. Quote Link to comment
Frank1940 Posted September 27, 2018 Share Posted September 27, 2018 5 hours ago, ajgoyt said: Hello what forum would i post in for an issue with this latest version? Probably self induced but need help with my friends server. On the Forum Home >>> UNRAID OS 6 SUPPORT >>> General Support Quote Link to comment
landS Posted September 27, 2018 Share Posted September 27, 2018 Updated the work Dell - zero issues. 1vm win 10 with gpu and Intel nic pass through. Still using the saslp Supermicro (marvel) disk controller. Web Gui is very pretty and feels snappier. Nice job. Quote Link to comment
Abnorm Posted September 27, 2018 Share Posted September 27, 2018 Upgraded from 6.5.3, no issues at all. Like the new interface ! Quote Link to comment
JorgeB Posted September 27, 2018 Share Posted September 27, 2018 On 9/26/2018 at 9:50 PM, cybrnook said: +1 If you test, let me know please. It's not needed anymore, at least not for me, also with an X11SSM-F. 1 Quote Link to comment
baconborn Posted September 28, 2018 Share Posted September 28, 2018 Does this version support CPU temperature monitoring with Ryzen APUs? (using dynamics system temp) Quote Link to comment
cybrnook Posted September 28, 2018 Share Posted September 28, 2018 12 hours ago, johnnie.black said: It's not needed anymore, at least not for me, also with an X11SSM-F. Also confirmed no longer needed on X10SRH-CLN4F Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.