September 21, 20187 yr Community Expert hi all, been a while since I needed a new drive. after adding it to my rig, I realised I had deleted the Joe's pre clear script (anyone know where to get it??) In my searching, seems to be some discussion that pre-clear may no longer be needed, since current unraid versions don't take array off line while clearing and adding a drive however, I thought that part of the need for the pre-clear process was to stress the drive a bit to see if it would be an early failure. Are folks stressing drives in other ways? thoughts are appreciated!
September 21, 20187 yr hi all, been a while since I needed a new drive. after adding it to my rig, I realised I had deleted the Joe's pre clear script (anyone know where to get it??) In my searching, seems to be some discussion that pre-clear may no longer be needed, since current unraid versions don't take array off line while clearing and adding a drive however, I thought that part of the need for the pre-clear process was to stress the drive a bit to see if it would be an early failure. Are folks stressing drives in other ways? thoughts are appreciated!You can install it from the community appsSent from my BND-L34 using Tapatalk
September 22, 20187 yr I have used it on 3 new drives the last 3 weeks. Worked perfectly on on the latest 6.6 rc3/4
Archived
This topic is now archived and is closed to further replies.