grither Posted September 21, 2018 Share Posted September 21, 2018 hi all, been a while since I needed a new drive. after adding it to my rig, I realised I had deleted the Joe's pre clear script (anyone know where to get it??) In my searching, seems to be some discussion that pre-clear may no longer be needed, since current unraid versions don't take array off line while clearing and adding a drive however, I thought that part of the need for the pre-clear process was to stress the drive a bit to see if it would be an early failure. Are folks stressing drives in other ways? thoughts are appreciated! Quote Link to comment
ijuarez Posted September 21, 2018 Share Posted September 21, 2018 hi all, been a while since I needed a new drive. after adding it to my rig, I realised I had deleted the Joe's pre clear script (anyone know where to get it??) In my searching, seems to be some discussion that pre-clear may no longer be needed, since current unraid versions don't take array off line while clearing and adding a drive however, I thought that part of the need for the pre-clear process was to stress the drive a bit to see if it would be an early failure. Are folks stressing drives in other ways? thoughts are appreciated!You can install it from the community appsSent from my BND-L34 using Tapatalk Quote Link to comment
Greygoose Posted September 22, 2018 Share Posted September 22, 2018 I have used it on 3 new drives the last 3 weeks. Worked perfectly on on the latest 6.6 rc3/4 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.