September 29, 20187 yr Hey everyone, I have a drive that recently started acting up. Temp warning were appearing up to I think it was 123 C even though its sitting in a 4u server with proper cooling. Even ambient temp in the room was 19C. Anyway now its been marked as faulty but running the extended SMART test came back fine. Can I please get some assistance figuring out what is going on? Please and thank you in advance! tower-diagnostics-20180929-0044.zip tower-smart-20180927-0304.zip tower-smart-20180928-1555.zip
September 29, 20187 yr There's a recent UNC at LBA error, so it was a disk problem, but it's OK now since it passed the extended test, I would probably give it a second chance but any more similar issues and replace it.
September 29, 20187 yr Author 24 minutes ago, johnnie.black said: There's a recent UNC at LBA error, so it was a disk problem, but it's OK now since it passed the extended test, I would probably give it a second chance but any more similar issues and replace it. Hey johnnie.black, Thank you for your reply. I honestly appreciate it. Quick question if you dont mind. How do I get my array back up and running currently its appearing as faulty and the drives contents are being emulated. I took a look at the settings of the drive itself and I dont see anything that sticks out. Ive attached a small screenshot of what the error is. Edited September 29, 20187 yr by PsyCl0ne
September 29, 20187 yr You need to either rebuild to a new drive or to the old one, to rebuild to the old one: https://wiki.unraid.net/Troubleshooting#Re-enable_the_drive
September 29, 20187 yr I think I'd rebuild to a NEW one. This one has 2000+ ReAllocated sectors. --UhClem
September 30, 20187 yr Author 21 hours ago, johnnie.black said: You need to either rebuild to a new drive or to the old one, to rebuild to the old one: https://wiki.unraid.net/Troubleshooting#Re-enable_the_drive 19 hours ago, UhClem said: I think I'd rebuild to a NEW one. This one has 2000+ ReAllocated sectors. --UhClem Thank you very much for your help! I tried rebuilding to the same drive and noticed that the reallocated sectors grew to 2136. I have stopped the rebuild and have replaced the drive. Just need to preclear and then I should be able to start the rebuild. I just wanted to thank you both once again! Please take care and see you around!!
September 30, 20187 yr 9 hours ago, PsyCl0ne said: Just need to preclear and then I should be able to start the rebuild. In this instance I would not preclear. The time it takes would be better spent getting the array healthy again. Do the rebuild, then do a non-correcting parity check, then examine the smart status of the new drive. Those actions will approximate the work a preclear will do, all while getting your array healthy again much quicker.
Archived
This topic is now archived and is closed to further replies.