Server Issues

[Cadal]

Good morning all,

 

Love the new branding guys.

 

So had bit of an issue with my home server this morning.

• noticed a vm didnt have its services running
• unable to access the web interface of unraid
• lights-on console displayed "hangcheck: hangcheck value past margin!" over and over
• was able to perform a software shutdown from the console.
• diagnostics attached
• seems to be running fine at the moment (set troubleshooting mode)
• have not updated to 6.6.1 yet and wont until I work out what the issue is or someone else is able top advise.

 

Thanks in advanced if you manage to take a look.

 

I'll update the thread with a reply at 24, 48, 72.

 

Hardware profile has been updated. Suffice to say 16GB of ECC, Xeon 1230.

storage-diagnostics-20180930-0850.zip

[JorgeB]

You're getting several NMI events during the parity check, some users fixed this or at least alleviated the problem by lowering the tunables.

 

I also see this repeating over and over, no idea if it's serious, but since it's being going on for a few days likely not:

Quote

Sep 29 04:47:21 storage kernel: kvm [20288]: vcpu2, guest rIP: 0xfffff800b4da9b92 kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR 0x1, nop

Also, and if possible connect your SSD to one of the onboard SATA ports, since the HBA where it it connected doesn't support trim.

[Cadal]

Hi Johnnie Black,

 

Thanks for the info I'll check it out, thanks for the SSD tip too.

[Cadal]

Well its been two days and still stable.