salora Posted October 1, 2018 Share Posted October 1, 2018 Hi, I was running unraid from month and never had issues while updating Yesterday I tried to update from 6.5.3 to 6.6.1 and after the reboot I only had a black screen with random appearances of the login screen and unraid logo but with no possibilities to log in So I rolled back to 6.5.3 and everything is working again I don't know what's wrong so if anyone can help me it would be very much appreciated regards Quote Link to comment
Hoopster Posted October 1, 2018 Share Posted October 1, 2018 1 hour ago, salora said: Hi, I was running unraid from month and never had issues while updating Yesterday I tried to update from 6.5.3 to 6.6.1 and after the reboot I only had a black screen with random appearances of the login screen and unraid logo but with no possibilities to log in So I rolled back to 6.5.3 and everything is working again I don't know what's wrong so if anyone can help me it would be very much appreciated regards It appears you have a monitor connected to your server. Does the unRAID menu appear on boot? Quote Link to comment
salora Posted October 2, 2018 Author Share Posted October 2, 2018 (edited) On 10/1/2018 at 10:23 PM, Hoopster said: It appears you have a monitor connected to your server. Does the unRAID menu appear on boot? I can see the boot menu and the boot sequence on the monitor yes but onnce its done, I have a black screen with a cursor with random and very short appearances of the unraid login screen but with no possibility to log in. then if I try to go to the unraid main page from a browser there is nothing regards Edited October 2, 2018 by salora Quote Link to comment
Hoopster Posted October 3, 2018 Share Posted October 3, 2018 (edited) 5 hours ago, salora said: I can see the boot menu and the boot sequence on the monitor yes but onnce its done, I have a black screen with a cursor with random and very short appearances of the unraid login screen but with no possibility to log in. then if I try to go to the unraid main page from a browser there is nothing That sounds like the boot process may not be completing. A few others with similar issues have found that updating their motherboard BIOS to the latest available has allowed unRAID to complete the boot process successfully. This may not be the cure, but, it should not hurt either. Limetech is encouraging everyone to update their BIOS as part of the upgrade to 6.6.x Start there and see if it makes any difference. If the problem is not resolved by a BIOS update (assuming that is necessary), try installing unRAID on a different flash drive, preferably a USB 2.0 drive 32GB or smaller, to eliminate or confirm the flash drive as the problem. You don't have to license unRAID on the new drive, just see if it will boot. Edited October 3, 2018 by Hoopster Quote Link to comment
salora Posted October 4, 2018 Author Share Posted October 4, 2018 (edited) hi bios is up to date a fresh install works with no config but when i put my config folder I can see the whole boot sequence with a command line that is curious cat: write error broken pipe and it does not work back to 6.5.3 again Edited October 4, 2018 by salora Quote Link to comment
trurl Posted October 4, 2018 Share Posted October 4, 2018 2 hours ago, salora said: a fresh install works with no config but when i put my config folder I can see the whole boot sequence with a command line that is curious cat: write error broken pipe Sounds like something broken in your config. Almost everything in config is a text file except super.dat and some plugins. Have you tried SAFE MODE? Quote Link to comment
salora Posted October 5, 2018 Author Share Posted October 5, 2018 I guess if the configuration was broken 6.5.3 wouldn't work too but it does did not try safe mode yet. it's a paid License not trial can't the devs help figure this out? best regards Quote Link to comment
trurl Posted October 5, 2018 Share Posted October 5, 2018 1 hour ago, salora said: I guess if the configuration was broken 6.5.3 wouldn't work too but it does did not try safe mode yet. it's a paid License not trial can't the devs help figure this out? best regards Free support is from the user community. Paid support is available but not included in the license. If it is an issue with the software and it is properly reported so they can reproduce it then they will of course work to fix it. Quote Link to comment
salora Posted October 5, 2018 Author Share Posted October 5, 2018 good to know, should have stayed in trial forever, it would have been the same whatever :( so yes something is wrong, what I don't know except for that broken pipe even if it is working in safe mode, i can't run it forever in safe mode :( so i someone can tell me what broken pipe means and where to look it would be appreciated best regards Quote Link to comment
salora Posted October 5, 2018 Author Share Posted October 5, 2018 not working either in safe mode :( I have attached the update report and some logs if that can help update.txt serveur-diagnostics-20181005-1835.zip syslog.zip Quote Link to comment
trurl Posted October 5, 2018 Share Posted October 5, 2018 1 hour ago, salora said: should have stayed in trial forever trial only lasts 30 days Quote Link to comment
salora Posted October 5, 2018 Author Share Posted October 5, 2018 Just now, trurl said: trial only lasts 30 days If you never stop it , it can last forever you can't upgrade but it's the same result if i cannot update it because of a bug Moreover it's not some old rig, but kabylake intel cpu with an updated motherboard with the last microcode Quote Link to comment
trurl Posted October 5, 2018 Share Posted October 5, 2018 22 hours ago, salora said: a fresh install works with no config but when i put my config folder Backup your config folder. Then with a new install, which you say works, just copy the .key file and super.dat from your backup to the config folder of the new install. That should get you going with your license and disk assignments. If not then that would indicate a problem with one of those 2 files. If it does work then we can go from there and see how to get other parts going again. Quote Link to comment
salora Posted October 5, 2018 Author Share Posted October 5, 2018 anyway, i paid the license so... I hope that with the logs someone will help me figure this out Quote Link to comment
salora Posted October 5, 2018 Author Share Posted October 5, 2018 1 minute ago, trurl said: Backup your config folder. Then with a new install, which you say works, just copy the .key file and super.dat from your backup to the config folder of the new install. That should get you going with your license and disk assignments. If not then that would indicate a problem with one of those 2 files. If it does work then we can go from there and see how to get other parts going again. I will try ok moreover in safe mode it's not working so i would say that the plugins are out of this Quote Link to comment
salora Posted October 5, 2018 Author Share Posted October 5, 2018 45 minutes ago, trurl said: Backup your config folder. Then with a new install, which you say works, just copy the .key file and super.dat from your backup to the config folder of the new install. That should get you going with your license and disk assignments. If not then that would indicate a problem with one of those 2 files. If it does work then we can go from there and see how to get other parts going again. so it is working like that What do I do next, do you need to see some files? Quote Link to comment
salora Posted October 5, 2018 Author Share Posted October 5, 2018 (edited) the only file I did change was the "go" file for plex hardware encoding so I start with that I putted this "#Setup drivers for hardware transcoding in Plex modprobe i915 chown -R nobody:users /dev/dri chmod -R 777 /dev/dri" Back to the original one its working with gui even if I still have that weird broken pipe error so now I'll try without the gui edit : it's working too, still the broken pipe, now it's time change the syslinux conf to enable the passthrough Edited October 5, 2018 by salora Quote Link to comment
salora Posted October 5, 2018 Author Share Posted October 5, 2018 ok so passthrough is working now too Docker seems very slow now , weird and I still don't know why I have this write error broken pipe ! but it's working now so big thank you for helping me best regards Quote Link to comment
Sleepy Posted February 13, 2019 Share Posted February 13, 2019 I am currently having the same problem but possibly different issues. ( I still need to check some things from this post. thank you for the tips/heads up!) I have a paid pro license. I tried jumping the shark upgrading from 6.5.3 to 6.6.6. My server would not reboot or shutdown after installing the update through the GUI. I kept getting a 504 Gateway error through the on multiple browsers, and multiple computers. When I tried refreshing the page, it would just cough back up to the main page as if I didn't ask it to reboot or shutdown. I tried asking nicely to reboot and shutdown through the GUI, asking in a bit more stern voice through the terminal, and then yelling at it while holding the power button. When I got it to hard reboot, I hooked a monitor to it see what the heck was going on. After going through the BIOS bit all I get is a half a blinking cursor. No boot sequence, no indication that the USB drive was unbootable... nothing. I yanked the USB after shutting down the sever again to see if there were "files." Things seemed to be in order, but I didn't get much time to start pulling log files yet. My next thing I'm going to try... Make sure m BIOS is up to date. Copy over my config files from by current USB. Grab another USB and install 6.6.6 on that in trial mode to see if it boots up try taking my current USB, copy over 6.6.6 and copy over my config files and see if that boots up. If that doesn't work or if I have some cycles in-between I'll try to take a look at the logs. Quote Link to comment
trurl Posted February 13, 2019 Share Posted February 13, 2019 The only thing I would add that you didn't mention is try another port, USB2. Quote Link to comment
Sleepy Posted February 14, 2019 Share Posted February 14, 2019 I tried the cheap and fast way and it worked out... I copied/backed up my current 6.5.3 USB drive. I reformatted and created a 6.6.6 USB drive. I then copied over my config folder, and it booted up with no trouble. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.