Steviewunda Posted October 14, 2018 Share Posted October 14, 2018 (edited) Hi - my unRaid server has 3 ethernet adapters - 2 onboard 1GB adapters (with 1 disabled) and 1 Mellanox ConnectX-2 10GB addin card. My WIN10 PC has an onboard 1GB adapter and a Mellanox Connectx-2 10GB card. The 2 10GB cards are connected by Cisco SFP cable. Both mellanox cards have updated firmware. I can access the unRaid shares from my WIN10 workstation via the 1GB adapter, but not via the 10GB adapter. I can access the unRaid web gui using either the 1GB (192.168.1.50) or the 10GB ip address (192.168.50.2). I cannot map any of the unRaid shares using the 10GB ip address. 'TOWER' is visible in Windows Explorer, but I cannot connect to it. The unRaid shares are public and the unRaid server is local master. I have tried most troubleshooting steps (disable/re-enable SMB, etc) but no joy. Any assistance appreciated - diagnostics attached. tower-diagnostics-20181014-1536.zip Edited October 14, 2018 by Steviewunda More info Quote Link to comment
Steviewunda Posted October 18, 2018 Author Share Posted October 18, 2018 Any suggestions? Quote Link to comment
Vr2Io Posted October 18, 2018 Share Posted October 18, 2018 Such topology should work, as you mention gui reachable in 2 network just not SMB. Pls check Windows side SMB have any blocking for subnet. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.