Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

CPU will not throttle down when idle (Help)

Featured Replies

Hi all, thanks for your time ......

 

I'm using an old 'AMD Phenom II X4 920' on a test build, when I run 'fix common problems' app I get the following error ....

 

"CPU possibly will not throttle down frequency at idle".

 

Suggested fix:

 

"Your CPU is running constantly at 100% and will not throttle down when it's idle (to save heat / power). This is because there is currently no CPU Scaling Driver Installed. Seek assistance on the unRaid forums with this issue".

 

So here I am ....... and thanks for reading.

 

regards

---

Numpkin

tower-03-diagnostics-20181015-1455.zip

tower-03-syslog-20181015-1456.zip

  • 2 months later...

Join club!

 

I'm on a ten year oldi AMD Phenom™ 9600 Quad-Core @ 2300 and get the sam error with "Fix Common Problems."
 

I see a lot of folks fixing the issue on intels, but not a lot on the AMD side.  One mentioned modprobe powernow_k8 but that worketh not for me.

 

I'm still hanging with:

 

# cat /proc/cpuinfo |egrep -i mhz
cpu MHz         : 2300.212
power management: ts ttp tm stc 100mhzsteps hwpstate
cpu MHz         : 2300.212
power management: ts ttp tm stc 100mhzsteps hwpstate
cpu MHz         : 2300.212
power management: ts ttp tm stc 100mhzsteps hwpstate
cpu MHz         : 2300.212
power management: ts ttp tm stc 100mhzsteps hwpstate

 

Posting my logs in case help is available.

 

KJ

skynet-diagnostics-20190105-1733.zip

skynet-syslog-20190105-1735.zip

Your BIOS is a few versions older than what is still available on MSI website.  If you update load defaults and adjust for what you need/had, then verify Cool'n'Quiet is enabled, HPET is enabled and ACPI is enabled.  If you overclock or adjust voltage go back to stock until you verify frequency scaling is working or you give up.  Boot into unRAID and grab another diagnostics.

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.