NewDisplayName Posted January 21, 2019 Share Posted January 21, 2019 nonono, best tactic is to have all movies in their respective folder. this will get more and more important the more movies u have. Quote Link to comment
francrouge Posted January 21, 2019 Share Posted January 21, 2019 5 minutes ago, nuhll said: nonono, best tactic is to have all movies in their respective folder. this will get more and more important the more movies u have. o okay i thought it was best to have them in one big folder. I will try to change that Quote Link to comment
NewDisplayName Posted January 21, 2019 Share Posted January 21, 2019 no its bad bc it has to read all files in that folder to see what changed if you add a movie. Quote Link to comment
francrouge Posted January 21, 2019 Share Posted January 21, 2019 4 minutes ago, nuhll said: no its bad bc it has to read all files in that folder to see what changed if you add a movie. Oo I see never thought this way but you are right. thank you again Quote Link to comment
DZMM Posted January 22, 2019 Author Share Posted January 22, 2019 https://support.plex.tv/articles/200381023-naming-movie-files/ @francrouge here's a couple of other tips to speedup plex. Here's a good one @slimshizn shared with me last week - makes a big difference for me https://github.com/Cloudbox/Community/wiki/Speed-up-Plex I also found this one last night, which has made a big difference to my library browsing 'speed' as images load much quicker as the cache isn't flushed of images not accessed in the last month. It will mean my cache will get big overtime but for now that's not a problem https://support.plex.tv/articles/201553286-scheduled-tasks/ Quote Remove old cache files every week When the image processor inside the Plex Media Server processes images (e.g. to resize them), a cached version of the transformed file is kept around for quick access later. This task cleans up files which were created over a month ago. Quote Link to comment
francrouge Posted January 22, 2019 Share Posted January 22, 2019 5 hours ago, DZMM said: https://support.plex.tv/articles/200381023-naming-movie-files/ @francrouge here's a couple of other tips to speedup plex. Here's a good one @slimshizn shared with me last week - makes a big difference for me https://github.com/Cloudbox/Community/wiki/Speed-up-Plex I also found this one last night, which has made a big difference to my library browsing 'speed' as images load much quicker as the cache isn't flushed of images not accessed in the last month. It will mean my cache will get big overtime but for now that's not a problem https://support.plex.tv/articles/201553286-scheduled-tasks/ thx for the infos i will try that @DZMM. Another question did you put you're metadata in cache also with the plex docker ? Thx Quote Link to comment
DZMM Posted January 22, 2019 Author Share Posted January 22, 2019 (edited) 5 minutes ago, francrouge said: thx for the infos i will try that @DZMM. Another question did you put you're metadata in cache also with the plex docker ? Thx My setup is: Unassigned NVME - for my main VMs and all Plex appdata SSD Cache drive - docker and other appdata; and cache Unassigned SSD - low priority VMs and nzbget/transmission downloads Edited January 22, 2019 by DZMM 1 Quote Link to comment
NewDisplayName Posted January 30, 2019 Share Posted January 30, 2019 Hey did anyone of u upgraded to RC1 or RC2? I get "network lock" (Not reachable via http, https, ssh, any docker or plugin) after 5min to 4h. Someone suggested it might be bc of nerd plugin (or programs in it) Anyone successfully upgraded? Quote Link to comment
francrouge Posted January 30, 2019 Share Posted January 30, 2019 Hey did anyone of u upgraded to RC1 or RC2? I get "network lock" (Not reachable via http, https, ssh, any docker or plugin) after 5min to 4h. Someone suggested it might be bc of nerd plugin (or programs in it) Anyone successfully upgraded?I upgraded to rc1 and everything is working good since Did you try to reverse to 6.6.6 ?ThxEnvoyé de mon Pixel 2 XL en utilisant Tapatalk Quote Link to comment
NewDisplayName Posted January 30, 2019 Share Posted January 30, 2019 Yes, i had to. 6.6.6 is working perfectly fine, but wheni upgrade, at some point, unraid just gets unresponsible. I just try to find out if it has something to do with this setup here. Quote Link to comment
francrouge Posted January 30, 2019 Share Posted January 30, 2019 Yes, i had to. 6.6.6 is working perfectly fine, but wheni upgrade, at some point, unraid just gets unresponsible. I just try to find out if it has something to do with this setup here.Good question maybe others can respond better then me.Envoyé de mon Pixel 2 XL en utilisant Tapatalk Quote Link to comment
slimshizn Posted January 31, 2019 Share Posted January 31, 2019 (edited) @DZMM ever since I added that "fix" for plex, I never get a lockup when restarting the container. BIG help for me. Has anyone ever ran into this issue.. So I like to look at "Date Added" on all of my libraries to see how long ago things were added. I've noticed that if I add a big library some movies or tv shows ( mostly movies ) that they were added a few seconds ago. Only problem is that these specific movies were added days before this. How is this fixed? They always show up in the dashboard of recently added forcing me to turn off "include in dashboard" feature for those libraries. Edited January 31, 2019 by slimshizn Quote Link to comment
Spladge Posted February 1, 2019 Share Posted February 1, 2019 Quite often they have scanned with a file modification date of 2099 and so remain at the top. I think you need to remove them from plex, copy the file, replace it and re add. Try changing modification dates first. Maybe a `touch` on the offending file. With both Plex and Emby I'm seeing files pause/stop at certain intervals. Pause/Play will do nothing but exiting the play state back to menu and then resuming playback works (for however long that interval is). I have seen some stuff about setting transcode directories but this doesn't seem to have worked and I am not sure how to do the same for emby. Any ideas? Quote Link to comment
NewDisplayName Posted February 1, 2019 Share Posted February 1, 2019 (edited) u can set ur transcoding to /tmp -> /tmp then it gets transcoded in RAM I never had problem with plex like some of u descripe, but i restart all my apps every day (with CA Backup Plugin). Btw, soon ill get 1gbits/500mbits I got some email from google about they shut something down, i guess it has nothing to dow ith us? (theres no mail in my language avaible atm) Edited February 1, 2019 by nuhll Quote Link to comment
Spladge Posted February 1, 2019 Share Posted February 1, 2019 Thank you nuhull - I had a few settings backwards and ram transcoding has done the trick. For emby `/tmp` didn't work but using /dev/shm/ seems to have. Quote Link to comment
NewDisplayName Posted February 1, 2019 Share Posted February 1, 2019 u ofc have to map /tmp to /tmp ^^ Quote Link to comment
NewDisplayName Posted February 2, 2019 Share Posted February 2, 2019 (edited) So i had some time to give something back... this is a script which i run every 1 min via cron which automaticlly starts and stops dockers (if mount is not working = stops one time all dockers, if mount comes back, starts docker one time). 1.) add rm -f /mnt/user/appdata/other/docker/* to your start/stop array script. It also logs it into sys log one time on start and stop. 2.) Change the paths/name of dockers accordingly to your settings. 3.) remove all docker start/stop from all your other scripts 4.) untick auto start the dockers (in unraid) #!/bin/bash # Check if Mount workz if [[ -f "/mnt/user/mount_rclone/google_vfs/mountcheck" ]]; then # Mount workz echo "$(date "+%d.%m.%Y %T") INFO: Mount okay, starte Docker" if [[ -f "/mnt/user/appdata/other/docker/docker_on" ]]; then #docker schon gestartet. echo "$(date "+%d.%m.%Y %T") INFO: Docker bereits gestartet." exit else #docker noch nicht gestartet logger $(date "+%d.%m.%Y %T") Docker noch nicht gestartet. Starte Docker... docker start PlexMediaServer docker start radarr docker start Sonarr docker start ombi docker start lidarr touch /mnt/user/appdata/other/docker/docker_on rm -f /mnt/user/appdata/other/docker/docker_off fi else if [[ -f "/mnt/user/appdata/other/docker/docker_off" ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Docker bereits gestoppt." exit else logger $(date "+%d.%m.%Y %T") Mount im Arsch. Docker stoppen... docker stop PlexMediaServer -t 1 docker stop radarr -t 1 docker stop Sonarr -t 1 docker stop ombi -t 1 docker stop lidarr -t 1 rm -f /mnt/user/appdata/other/docker/docker_on touch /mnt/user/appdata/other/docker/docker_off fi fi Edited February 2, 2019 by nuhll Quote Link to comment
NightMan Posted February 6, 2019 Share Posted February 6, 2019 I'm having trouble with this setup. I've already got rclone with unionfs set up on my remote server by using Plexguide. But I'd like to migrate my setup to a local Unraid server. My mounts won't stay mounted for more than 10 minutes or so. After that it will not remount until I run the Unmount script, then delete the mount folders, then run the mount script again. At first I thought it might have been a flaw with the script, I noticed at the beginning of the mount script it creates a file at /mnt/user/appdata/other/rclone/rclone_mount_running and never deletes it, so when I would try to run the Mount script again it would always say that it was already running so I tried adding: rm /mnt/user/appdata/other/rclone/rclone_mount_running at the end of the script before the exit, but that didn't solve my issue. So I'm not sure if I should leave that in there? But the mount works flawlessly otherwise but only for about 10 minutes. After that the error I get from the log is mkdir: cannot create directory '/mnt/user/mount_rclone/google_vfs': File exists 05.02.2019 16:20:01 INFO: mounting rclone vfs. 2019/02/05 16:20:02 Fatal error: Can not open: /mnt/user/mount_rclone/google_vfs: open /mnt/user/mount_rclone/google_vfs: transport endpoint is not connected 05.02.2019 16:20:06 CRITICAL: rclone gdrive vfs mount failed - please check for problems. Script Finished Tue, 05 Feb 2019 16:20:06 -0800 Like I said above the only way to fix this I've found is to run the Unmount script, delete "mount_rclone mount_unionfs rclone_upload" and the re-run the mount script. Any ideas? Quote Link to comment
NewDisplayName Posted February 6, 2019 Share Posted February 6, 2019 (edited) how u start the mount script, you NEED to click run script in background. (not via RUN) Edited February 6, 2019 by nuhll Quote Link to comment
NightMan Posted February 6, 2019 Share Posted February 6, 2019 Forgot to mention, I am already clicking run in background. Quote Link to comment
francrouge Posted February 8, 2019 Share Posted February 8, 2019 Hi guys I'm on unraid Version: 6.7.0-rc2 and i'm experiencing some issue with my mount disconnecting. Do you guys have any advice ? here is my config thx Quote Link to comment
francrouge Posted February 8, 2019 Share Posted February 8, 2019 (edited) Edit: for some reason it seem to work. what would you recommend to run this every day ? @DZMM Hi i'm getting error with you're cleanup script. rm: cannot remove '/mnt/user/mount_unionfs/google_vfs/.unionfs/ABCDE_HIDDEN~': Is a directory Do you have an idea ? do i need more permission ? thx Edited February 8, 2019 by francrouge Quote Link to comment
DZMM Posted February 8, 2019 Author Share Posted February 8, 2019 2 hours ago, francrouge said: @DZMM Hi i'm getting error with you're cleanup script. rm: cannot remove '/mnt/user/mount_unionfs/google_vfs/.unionfs/ABCDE_HIDDEN~': Is a directory Do you have an idea ? do i need more permission ? thx Are you sure your script is setup correctly? Here's mine: #!/bin/bash ####### Check if script already running ########## if [[ -f "/mnt/user/appdata/other/rclone/rclone_mount_cleanup" ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Exiting as script already running." exit else touch /mnt/user/appdata/other/rclone/rclone_mount_cleanup fi ####### End Check if script already running ########## ################### Clean-up UnionFS Folder ######################### echo "$(date "+%d.%m.%Y %T") INFO: starting unionfs cleanup." find /mnt/user/mount_unionfs/google_vfs/.unionfs -name '*_HIDDEN~' | while read line; do oldPath=${line#/mnt/user/mount_unionfs/google_vfs/.unionfs} newPath=/mnt/user/mount_rclone/gdrive_vfs${oldPath%_HIDDEN~} rm "$newPath" rm "$line" done find "/mnt/user/mount_unionfs/google_vfs/.unionfs" -mindepth 1 -type d -empty -delete rm /mnt/user/appdata/other/rclone/rclone_mount_cleanup exit Quote Link to comment
francrouge Posted February 9, 2019 Share Posted February 9, 2019 On 2/8/2019 at 2:44 AM, francrouge said: @DZMM Did you experience anything like that ? The mount is dropping off a few thime a day since the upgrade. I did put 10 min but it always tell me that the script is running when its not really (the mount script) On 2/8/2019 at 2:44 AM, francrouge said: Hi guys I'm on unraid Version: 6.7.0-rc2 and i'm experiencing some issue with my mount disconnecting. Do you guys have any advice ? here is my config thx Quote Link to comment
DZMM Posted February 9, 2019 Author Share Posted February 9, 2019 2 hours ago, francrouge said: Did you experience anything like that ? The mount is dropping off a few thime a day since the upgrade. I did put 10 min but it always tell me that the script is running when its not really (the mount script) I'm still on 6.6.6 and it's rock solid for me - if it's ever dropped I haven't noticed Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.