Guide: How To Use Rclone To Mount Cloud Drives And Play Files


DZMM

Recommended Posts

I just got a 2nd mount up and running and it hit me I May have a problem with restarts. If docker containers have to be started after the mounts are established how to you make sure both mounts have completed before starting the dockers? Has any one addressed? or is this not a problem?  

Link to comment
Posted (edited)
On 4/28/2022 at 6:25 PM, southloven said:

I just got a 2nd mount up and running and it hit me I May have a problem with restarts. If docker containers have to be started after the mounts are established how to you make sure both mounts have completed before starting the dockers? Has any one addressed? or is this not a problem?  

put the mounts in one script and start the dockers only when the 2nd mount is successful!

Edit: hardcode the dockers you need to stop in the relevant section for the first mount if it fails

Here's a snippet from my combined mount script that mounts about 7 team drives in sequence, but only the last mount creates the mergerfs mount.  The key line is the hardcoded docker stop section that stops the dockers if any of the mounts fail:

 

################################################################
###################### mount uhd  ##############################
################################################################

# REQUIRED SETTINGS
RcloneRemoteName="tdrive_uhd_vfs"
RcloneMountShare="/mnt/user/mount_rclone"
LocalFilesShare="ignore"
MergerfsMountShare="ignore"
DockerStart="swag"
MountFolders=\{"uhd/tv_adults_gd,uhd/tv_kids_gd,uhd/documentaries/kids,uhd/documentaries/adults"\}

# OPTIONAL SETTINGS

# Add extra paths to mergerfs mount in addition to LocalFilesShare
LocalFilesShare2="ignore"
LocalFilesShare3="ignore"
LocalFilesShare4="ignore"

# Add extra commands or filters
Command1=""
Command2=""
Command3=""
Command4=""
Command5=""
Command6=""
Command7=""
Command8=""
CreateBindMount="N" 
RCloneMountIP="192.168.1.76"
NetworkAdapter="eth0"
VirtualIPNumber="6"

####### END SETTINGS #######

# fusermount -uz /mnt/user/mount_rclone/$RcloneRemoteName

####### Preparing mount location variables #######
LocalFilesLocation="$LocalFilesShare/$RcloneRemoteName"
RcloneMountLocation="$RcloneMountShare/$RcloneRemoteName"
MergerFSMountLocation="$MergerfsMountShare/$RcloneRemoteName"

####### create directories for rclone mount and mergerfs mounts #######
mkdir -p /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName #for script files
mkdir -p /mnt/user/mount_rclone/cache/$RcloneRemoteName #for cache files
if [[  $LocalFilesShare == 'ignore' ]]; then
	echo "$(date "+%d.%m.%Y %T") INFO: Not creating local folders as requested."
else
	echo "$(date "+%d.%m.%Y %T") INFO: Creating local folders."
	eval mkdir -p $LocalFilesLocation/"$MountFolders"
fi
mkdir -p $RcloneMountLocation
mkdir -p $MergerFSMountLocation

#######  Check if script is already running  #######
echo "$(date "+%d.%m.%Y %T") INFO: *** Starting mount of remote ${RcloneRemoteName}"
echo "$(date "+%d.%m.%Y %T") INFO: Checking if this script is already running."
if [[ -f "/mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running" ]]; then
	echo "$(date "+%d.%m.%Y %T") INFO: Exiting script as already running."
	exit
else
	echo "$(date "+%d.%m.%Y %T") INFO: Script not running - proceeding."
	touch /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running
fi

#######  Create Rclone Mount  #######

# Check If Rclone Mount Already Created
if [[ -f "$RcloneMountLocation/mountcheck" ]]; then
	echo "$(date "+%d.%m.%Y %T") INFO: Success ${RcloneRemoteName} remote is already mounted."
else
	echo "$(date "+%d.%m.%Y %T") INFO: Mount not running. Will now mount ${RcloneRemoteName} remote."
# Creating mountcheck file in case it doesn't already exist
	echo "$(date "+%d.%m.%Y %T") INFO: Recreating mountcheck file for ${RcloneRemoteName} remote."
	touch mountcheck
	rclone copy mountcheck $RcloneRemoteName: -vv --no-traverse
# Check bind option
	if [[  $CreateBindMount == 'Y' ]]; then
		echo "$(date "+%d.%m.%Y %T") INFO: *** Checking if IP address ${RCloneMountIP} already created for remote ${RcloneRemoteName}"
		ping -q -c2 $RCloneMountIP > /dev/null # -q quiet, -c number of pings to perform
		if [ $? -eq 0 ]; then # ping returns exit status 0 if successful
			echo "$(date "+%d.%m.%Y %T") INFO: *** IP address ${RCloneMountIP} already created for remote ${RcloneRemoteName}"
		else
			echo "$(date "+%d.%m.%Y %T") INFO: *** Creating IP address ${RCloneMountIP} for remote ${RcloneRemoteName}"
			ip addr add $RCloneMountIP/24 dev $NetworkAdapter label $NetworkAdapter:$VirtualIPNumber
		fi
		echo "$(date "+%d.%m.%Y %T") INFO: *** Created bind mount ${RCloneMountIP} for remote ${RcloneRemoteName}"
	else
		RCloneMountIP=""
		echo "$(date "+%d.%m.%Y %T") INFO: *** Creating mount for remote ${RcloneRemoteName}"
	fi
# create rclone mount
	rclone mount \
	$Command1 $Command2 $Command3 $Command4 $Command5 $Command6 $Command7 $Command8 \
	--allow-other \
	--umask 000 \
	--dir-cache-time 5000h \
	--attr-timeout 5000h \
	--log-level INFO \
	--poll-interval 10s \
	--cache-dir=/mnt/user/mount_rclone/cache/$RcloneRemoteName \
	--drive-pacer-min-sleep 10ms \
	--drive-pacer-burst 1000 \
	--vfs-cache-mode full \
        --vfs-read-chunk-size 256M \
	--vfs-cache-max-size 400G \
	--vfs-cache-max-age 96h \
	--vfs-read-ahead 1G \
	--bind=$RCloneMountIP \
	$RcloneRemoteName: $RcloneMountLocation &

# Check if Mount Successful
	echo "$(date "+%d.%m.%Y %T") INFO: sleeping for 5 seconds"
# slight pause to give mount time to finalise
	sleep 10
	echo "$(date "+%d.%m.%Y %T") INFO: continuing..."
	if [[ -f "$RcloneMountLocation/mountcheck" ]]; then
		echo "$(date "+%d.%m.%Y %T") INFO: Successful mount of ${RcloneRemoteName} mount."
	else
		echo "$(date "+%d.%m.%Y %T") CRITICAL: ${RcloneRemoteName} mount failed - please check for problems."
		docker stop qbittorrentvpn readarr plex radarr_new radarr-uhd sonarr sonarr_new sonarr-uhd
		find /mnt/user/appdata/other/rclone/remotes -name mount_running* -delete
		rm /mnt/user/appdata/other/scripts/running/fast_check
		exit
	fi
fi

####### Start MergerFS Mount #######

if [[  $MergerfsMountShare == 'ignore' ]]; then
	echo "$(date "+%d.%m.%Y %T") INFO: Not creating mergerfs mount as requested."
else
	if [[ -f "$MergerFSMountLocation/mountcheck" ]]; then
		echo "$(date "+%d.%m.%Y %T") INFO: Check successful, ${RcloneRemoteName} mergerfs mount in place."
	else
# check if mergerfs already installed
		if [[ -f "/bin/mergerfs" ]]; then
			echo "$(date "+%d.%m.%Y %T") INFO: Mergerfs already installed, proceeding to create mergerfs mount"
		else
# Build mergerfs binary
			echo "$(date "+%d.%m.%Y %T") INFO: Mergerfs not installed - installing now."
			mkdir -p /mnt/user/appdata/other/rclone/mergerfs
			docker run -v /mnt/user/appdata/other/rclone/mergerfs:/build --rm trapexit/mergerfs-static-build
			mv /mnt/user/appdata/other/rclone/mergerfs/mergerfs /bin
# check if mergerfs install successful
			echo "$(date "+%d.%m.%Y %T") INFO: *sleeping for 5 seconds"
			sleep 10
			if [[ -f "/bin/mergerfs" ]]; then
				echo "$(date "+%d.%m.%Y %T") INFO: Mergerfs installed successfully, proceeding to create mergerfs mount."
			else
				echo "$(date "+%d.%m.%Y %T") ERROR: Mergerfs not installed successfully.  Please check for errors.  Exiting."
				docker stop qbittorrentvpn readarr plex radarr_new radarr-uhd sonarr sonarr_new sonarr-uhd
				find /mnt/user/appdata/other/rclone/remotes -name mount_running* -delete
				rm /mnt/user/appdata/other/scripts/running/fast_check
				exit
			fi
		fi
# Create mergerfs mount
		echo "$(date "+%d.%m.%Y %T") INFO: Creating ${RcloneRemoteName} mergerfs mount."
# Extra Mergerfs folders
		if [[  $LocalFilesShare2 != 'ignore' ]]; then
			echo "$(date "+%d.%m.%Y %T") INFO: Adding ${LocalFilesShare2} to ${RcloneRemoteName} mergerfs mount."
			LocalFilesShare2=":$LocalFilesShare2"
		else
			LocalFilesShare2=""
		fi
		if [[  $LocalFilesShare3 != 'ignore' ]]; then
			echo "$(date "+%d.%m.%Y %T") INFO: Adding ${LocalFilesShare3} to ${RcloneRemoteName} mergerfs mount."
			LocalFilesShare3=":$LocalFilesShare3"
		else
			LocalFilesShare3=""
		fi
		if [[  $LocalFilesShare4 != 'ignore' ]]; then
			echo "$(date "+%d.%m.%Y %T") INFO: Adding ${LocalFilesShare4} to ${RcloneRemoteName} mergerfs mount."
			LocalFilesShare4=":$LocalFilesShare4"
		else
			LocalFilesShare4=""
		fi
# mergerfs mount command
		mergerfs $LocalFilesLocation:$RcloneMountLocation$LocalFilesShare2$LocalFilesShare3$LocalFilesShare4 $MergerFSMountLocation -o rw,async_read=false,use_ino,allow_other,func.getattr=newest,category.action=all,category.create=ff,cache.files=partial,dropcacheonclose=true
# check if mergerfs mount successful
		echo "$(date "+%d.%m.%Y %T") INFO: Checking if ${RcloneRemoteName} mergerfs mount created."
		if [[ -f "$MergerFSMountLocation/mountcheck" ]]; then
			echo "$(date "+%d.%m.%Y %T") INFO: Check successful, ${RcloneRemoteName} mergerfs mount created."
		else
			echo "$(date "+%d.%m.%Y %T") CRITICAL: ${RcloneRemoteName} mergerfs mount failed."
			docker stop qbittorrentvpn readarr plex radarr_new radarr-uhd sonarr sonarr_new sonarr-uhd
			find /mnt/user/appdata/other/rclone/remotes -name mount_running* -delete
			rm /mnt/user/appdata/other/scripts/running/fast_check
			exit
		fi
	fi
fi

####### Starting Dockers That Need Mergerfs Mount To Work Properly #######

if [[ -f "/tmp/ca.backup2/tempFiles/backupInProgress" ]] || [[ -f "/tmp/ca.backup2/tempFiles/restoreInProgress" ]] ; then
	echo "$(date "+%d.%m.%Y %T") INFO: Appdata Backup plugin running - not starting dockers."
else
	echo "$(date "+%d.%m.%Y %T") INFO: Starting dockers."
	docker start $DockerStart
fi

rm /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running
echo "$(date "+%d.%m.%Y %T") INFO: ${RcloneRemoteName} Script complete"

################################################################
###################### mount tdrive   ########################
################################################################

# # fusermount -uz /mnt/user/mount_rclone/tdrive_vfs
# # fusermount -uz /mnt/user/mount_mergerfs/tdrive_vfs

# REQUIRED SETTINGS
RcloneRemoteName="tdrive_vfs"
RcloneMountShare="/mnt/user/mount_rclone"
LocalFilesShare="/mnt/user/local"
MergerfsMountShare="/mnt/user/mount_mergerfs"
DockerStart="qbittorrentvpn readarr plex radarr_new radarr-uhd sonarr sonarr_new sonarr-uhd"
MountFolders=\{"anime/movies,downloads/complete,documentaries/kids,documentaries/adults,movies_adults_gd,movies_kids,tv_adults,uhd/tv_adults_gd,uhd/tv_kids_gd,uhd/documentaries/kids,uhd/documentaries/adults"\}

# OPTIONAL SETTINGS

# Add extra paths to mergerfs mount in addition to LocalFilesShare
LocalFilesShare2="/mnt/user/mount_rclone/gdrive_media_vfs" # without trailing slash e.g. /mnt/user/other__remote_mount/or_other_local_folder.  Enter 'ignore' to disable
LocalFilesShare3="/mnt/user/mount_rclone/tdrive_uhd_vfs"
LocalFilesShare4="/mnt/user/mount_rclone/tdrive_tv_adults_vfs"
LocalFilesShare5="/mnt/user/mount_rclone/tdrive_tv_kids_vfs"
LocalFilesShare6="/mnt/user/mount_rclone/tdrive_movies_adults_vfs"

# Add extra commands or filters
Command1=""
Command2=""
Command3=""
Command4=""
Command5=""
Command6=""
Command7=""
Command8=""
CreateBindMount="N" 
RCloneMountIP="192.168.1.77" 
NetworkAdapter="eth0" 
VirtualIPNumber="7"

####### END SETTINGS #######

# fusermount -uz /mnt/user/mount_rclone/$RcloneRemoteName

####### Preparing mount location variables #######
LocalFilesLocation="$LocalFilesShare/$RcloneRemoteName"
RcloneMountLocation="$RcloneMountShare/$RcloneRemoteName"
MergerFSMountLocation="$MergerfsMountShare/$RcloneRemoteName"

####### create directories for rclone mount and mergerfs mounts #######
mkdir -p /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName #for script files
mkdir -p /mnt/user/mount_rclone/cache/$RcloneRemoteName #for cache files
if [[  $LocalFilesShare == 'ignore' ]]; then
	echo "$(date "+%d.%m.%Y %T") INFO: Not creating local folders as requested."
else
	echo "$(date "+%d.%m.%Y %T") INFO: Creating local folders."
	eval mkdir -p $LocalFilesLocation/"$MountFolders"
fi
mkdir -p $RcloneMountLocation
mkdir -p $MergerFSMountLocation

#######  Check if script is already running  #######
echo "$(date "+%d.%m.%Y %T") INFO: *** Starting mount of remote ${RcloneRemoteName}"
echo "$(date "+%d.%m.%Y %T") INFO: Checking if this script is already running."
if [[ -f "/mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running" ]]; then
	echo "$(date "+%d.%m.%Y %T") INFO: Exiting script as already running."
	exit
else
	echo "$(date "+%d.%m.%Y %T") INFO: Script not running - proceeding."
	touch /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running
fi

#######  Create Rclone Mount  #######

# Check If Rclone Mount Already Created
if [[ -f "$RcloneMountLocation/mountcheck" ]]; then
	echo "$(date "+%d.%m.%Y %T") INFO: Success ${RcloneRemoteName} remote is already mounted."
else
	echo "$(date "+%d.%m.%Y %T") INFO: Mount not running. Will now mount ${RcloneRemoteName} remote."
# Creating mountcheck file in case it doesn't already exist
	echo "$(date "+%d.%m.%Y %T") INFO: Recreating mountcheck file for ${RcloneRemoteName} remote."
	touch mountcheck
	rclone copy mountcheck $RcloneRemoteName: -vv --no-traverse
# Check bind option
	if [[  $CreateBindMount == 'Y' ]]; then
		echo "$(date "+%d.%m.%Y %T") INFO: *** Checking if IP address ${RCloneMountIP} already created for remote ${RcloneRemoteName}"
		ping -q -c2 $RCloneMountIP > /dev/null # -q quiet, -c number of pings to perform
		if [ $? -eq 0 ]; then # ping returns exit status 0 if successful
			echo "$(date "+%d.%m.%Y %T") INFO: *** IP address ${RCloneMountIP} already created for remote ${RcloneRemoteName}"
		else
			echo "$(date "+%d.%m.%Y %T") INFO: *** Creating IP address ${RCloneMountIP} for remote ${RcloneRemoteName}"
			ip addr add $RCloneMountIP/24 dev $NetworkAdapter label $NetworkAdapter:$VirtualIPNumber
		fi
		echo "$(date "+%d.%m.%Y %T") INFO: *** Created bind mount ${RCloneMountIP} for remote ${RcloneRemoteName}"
	else
		RCloneMountIP=""
		echo "$(date "+%d.%m.%Y %T") INFO: *** Creating mount for remote ${RcloneRemoteName}"
	fi
# create rclone mount
	rclone mount \
	$Command1 $Command2 $Command3 $Command4 $Command5 $Command6 $Command7 $Command8 \
	--allow-other \
	--umask 000 \
	--dir-cache-time 5000h \
	--attr-timeout 5000h \
	--log-level INFO \
	--poll-interval 10s \
	--cache-dir=/mnt/user/mount_rclone/cache/$RcloneRemoteName \
	--drive-pacer-min-sleep 10ms \
	--drive-pacer-burst 1000 \
	--vfs-cache-mode full \
	--vfs-cache-max-size 400G \
	--vfs-cache-max-age 96h \
	--vfs-read-ahead 1G \
	--bind=$RCloneMountIP \
	$RcloneRemoteName: $RcloneMountLocation &

# Check if Mount Successful
	echo "$(date "+%d.%m.%Y %T") INFO: sleeping for 5 seconds"
# slight pause to give mount time to finalise
	sleep 10
	echo "$(date "+%d.%m.%Y %T") INFO: continuing..."
	if [[ -f "$RcloneMountLocation/mountcheck" ]]; then
		echo "$(date "+%d.%m.%Y %T") INFO: Successful mount of ${RcloneRemoteName} mount."
	else
		echo "$(date "+%d.%m.%Y %T") CRITICAL: ${RcloneRemoteName} mount failed - please check for problems."
		docker stop $DockerStart
		fusermount -uz /mnt/user/mount_mergerfs/tdrive_vfs
		find /mnt/user/appdata/other/rclone/remotes -name mount_running* -delete
		rm /mnt/user/appdata/other/scripts/running/fast_check
		exit
	fi
fi

####### Start MergerFS Mount #######

if [[  $MergerfsMountShare == 'ignore' ]]; then
	echo "$(date "+%d.%m.%Y %T") INFO: Not creating mergerfs mount as requested."
else
	if [[ -f "$MergerFSMountLocation/mountcheck" ]]; then
		echo "$(date "+%d.%m.%Y %T") INFO: Check successful, ${RcloneRemoteName} mergerfs mount in place."
	else
# check if mergerfs already installed
		if [[ -f "/bin/mergerfs" ]]; then
			echo "$(date "+%d.%m.%Y %T") INFO: Mergerfs already installed, proceeding to create mergerfs mount"
		else
# Build mergerfs binary
			echo "$(date "+%d.%m.%Y %T") INFO: Mergerfs not installed - installing now."
			mkdir -p /mnt/user/appdata/other/rclone/mergerfs
			docker run -v /mnt/user/appdata/other/rclone/mergerfs:/build --rm trapexit/mergerfs-static-build
			mv /mnt/user/appdata/other/rclone/mergerfs/mergerfs /bin
# check if mergerfs install successful
			echo "$(date "+%d.%m.%Y %T") INFO: *sleeping for 5 seconds"
			sleep 10
			if [[ -f "/bin/mergerfs" ]]; then
				echo "$(date "+%d.%m.%Y %T") INFO: Mergerfs installed successfully, proceeding to create mergerfs mount."
			else
				echo "$(date "+%d.%m.%Y %T") ERROR: Mergerfs not installed successfully.  Please check for errors.  Exiting."
				docker stop $DockerStart
				fusermount -uz /mnt/user/mount_mergerfs/tdrive_vfs
				find /mnt/user/appdata/other/rclone/remotes -name mount_running* -delete
				rm /mnt/user/appdata/other/scripts/running/fast_check
				exit
			fi
		fi
# Create mergerfs mount
		echo "$(date "+%d.%m.%Y %T") INFO: Creating ${RcloneRemoteName} mergerfs mount."
# Extra Mergerfs folders
		if [[  $LocalFilesShare2 != 'ignore' ]]; then
			echo "$(date "+%d.%m.%Y %T") INFO: Adding ${LocalFilesShare2} to ${RcloneRemoteName} mergerfs mount."
			LocalFilesShare2=":$LocalFilesShare2"
		else
			LocalFilesShare2=""
		fi
		if [[  $LocalFilesShare3 != 'ignore' ]]; then
			echo "$(date "+%d.%m.%Y %T") INFO: Adding ${LocalFilesShare3} to ${RcloneRemoteName} mergerfs mount."
			LocalFilesShare3=":$LocalFilesShare3"
		else
			LocalFilesShare3=""
		fi
		if [[  $LocalFilesShare4 != 'ignore' ]]; then
			echo "$(date "+%d.%m.%Y %T") INFO: Adding ${LocalFilesShare4} to ${RcloneRemoteName} mergerfs mount."
			LocalFilesShare4=":$LocalFilesShare4"
		else
			LocalFilesShare4=""
		fi
		if [[  $LocalFilesShare5 != 'ignore' ]]; then
			echo "$(date "+%d.%m.%Y %T") INFO: Adding ${LocalFilesShare5} to ${RcloneRemoteName} mergerfs mount."
			LocalFilesShare5=":$LocalFilesShare5"
		else
			LocalFilesShare5=""
		fi
		if [[  $LocalFilesShare6 != 'ignore' ]]; then
			echo "$(date "+%d.%m.%Y %T") INFO: Adding ${LocalFilesShare6} to ${RcloneRemoteName} mergerfs mount."
			LocalFilesShare6=":$LocalFilesShare6"
		else
			LocalFilesShare6=""
		fi
# mergerfs mount command
		mergerfs $LocalFilesLocation:$RcloneMountLocation$LocalFilesShare2$LocalFilesShare3$LocalFilesShare4$LocalFilesShare5$LocalFilesShare6 $MergerFSMountLocation -o rw,async_read=false,use_ino,allow_other,func.getattr=newest,category.action=all,category.create=ff,cache.files=partial,dropcacheonclose=true
# check if mergerfs mount successful
		echo "$(date "+%d.%m.%Y %T") INFO: Checking if ${RcloneRemoteName} mergerfs mount created."
		if [[ -f "$MergerFSMountLocation/mountcheck" ]]; then
			echo "$(date "+%d.%m.%Y %T") INFO: Check successful, ${RcloneRemoteName} mergerfs mount created."
		else
			echo "$(date "+%d.%m.%Y %T") CRITICAL: ${RcloneRemoteName} mergerfs mount failed."
			docker stop $DockerStart
			fusermount -uz /mnt/user/mount_mergerfs/tdrive_vfs
			find /mnt/user/appdata/other/rclone/remotes -name mount_running* -delete
			rm /mnt/user/appdata/other/scripts/running/fast_check
			exit
		fi
	fi
fi

####### Starting Dockers That Need Mergerfs Mount To Work Properly #######

if [[ -f "/tmp/ca.backup2/tempFiles/backupInProgress" ]] || [[ -f "/tmp/ca.backup2/tempFiles/restoreInProgress" ]] ; then
	echo "$(date "+%d.%m.%Y %T") INFO: Appdata Backup plugin running - not starting dockers."
else
	echo "$(date "+%d.%m.%Y %T") INFO: Starting dockers."
	docker start $DockerStart
fi

rm /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running
echo "$(date "+%d.%m.%Y %T") INFO: ${RcloneRemoteName} Script complete"

 

Edited by DZMM
  • Like 1
Link to comment

New email from Google. Anyone else get this? Anyone figured out how to proceed? (edited out some identifying content)

 

Our records indicate you have OAuth clients that used the OAuth OOB flow in the past.

Hello Google OAuth Developer,

We are writing to inform you that OAuth out-of-band (OOB) flow will be deprecated on October 3, 2022, to protect users from phishing and app impersonation attacks.

What do I need to know?

Starting October 3, 2022, we will block OOB requests to Google’s OAuth 2.0 authorization endpoint for existing clients. Apps using OOB in testing mode will not be affected. However, we strongly recommend you to migrate them to safer methods as these apps will be immediately blocked when switching to in production status.

Note: New OOB usage has already been disallowed since February 28, 2022.

Below are key dates for compliance

September 5, 2022: A user-facing warning message may be displayed to non-compliant OAuth requests

October 3, 2022: The OOB flow is blocked for all clients and users will see the error page.

Please check out our recent blog post about Making Google OAuth interactions safer for more information.

What do I need to do?

Migrate your app(s) to an appropriate alternative method by following these instructions:

Determine your app(s) client type from your Google Cloud project by following the client links below.

Migrate your app(s) to a more secure alternative method by following the instructions in the blog post above for your client type.

If necessary, you may request a one-time extension for migrating your app until January 31, 2023. Keep in mind that all OOB authorization requests will be blocked on February 1, 2023.

The following OAuth client(s) will be blocked on Oct 3, 2022.

OAuth client list:

Project ID: rcloneclientid-247***

Client: 211984046708-hahav9pt2t2v6mc6*********apps.googleusercontent.com

Thanks for choosing Google OAuth.

— The Google OAuth Developer Team

Link to comment
3 hours ago, sol said:

New email from Google. Anyone else get this? Anyone figured out how to proceed? (edited out some identifying content)

 

Our records indicate you have OAuth clients that used the OAuth OOB flow in the past.

Hello Google OAuth Developer,

We are writing to inform you that OAuth out-of-band (OOB) flow will be deprecated on October 3, 2022, to protect users from phishing and app impersonation attacks.

What do I need to know?

Starting October 3, 2022, we will block OOB requests to Google’s OAuth 2.0 authorization endpoint for existing clients. Apps using OOB in testing mode will not be affected. However, we strongly recommend you to migrate them to safer methods as these apps will be immediately blocked when switching to in production status.

Note: New OOB usage has already been disallowed since February 28, 2022.

Below are key dates for compliance

September 5, 2022: A user-facing warning message may be displayed to non-compliant OAuth requests

October 3, 2022: The OOB flow is blocked for all clients and users will see the error page.

Please check out our recent blog post about Making Google OAuth interactions safer for more information.

What do I need to do?

Migrate your app(s) to an appropriate alternative method by following these instructions:

Determine your app(s) client type from your Google Cloud project by following the client links below.

Migrate your app(s) to a more secure alternative method by following the instructions in the blog post above for your client type.

If necessary, you may request a one-time extension for migrating your app until January 31, 2023. Keep in mind that all OOB authorization requests will be blocked on February 1, 2023.

The following OAuth client(s) will be blocked on Oct 3, 2022.

OAuth client list:

Project ID: rcloneclientid-247***

Client: 211984046708-hahav9pt2t2v6mc6*********apps.googleusercontent.com

Thanks for choosing Google OAuth.

— The Google OAuth Developer Team

 

 

Post #5 https://forum.rclone.org/t/google-oauth-migration-for-rclone/30545/5

 

That's from THE lead on rclone. seems it might not be a big deal. 

Link to comment

As long as you are running rclone 1.58 or newer then rclone will continue to work normally. 

 

Essentially what is happening is google is deprecating the copy paste method for the client ID and secret from the admin console but only for ios,android and some other devices. The method rclone uses in 1.58 to re-authenticate to google is different. 

 

TLDR: Ensure your rclone plugin is up to date and everything will continue to work fine.

Link to comment
Posted (edited)

adding the below to you mount script should resolve the permissions issue if your updating to 6.10 RC7, i will test in approx 12 hours if this fixes the permissions issue with docker containers and plex.

Quote

--uid 98 \
--gid 99 \

 

if you run the below from cli it should confirm what USER nobody is set too

Quote

getent group | grep no

 

Edited by Bolagnaise
  • Like 1
  • Thanks 1
Link to comment
4 hours ago, Bolagnaise said:

adding the below to you mount script should resolve the permissions issue if your updating to 6.10 RC7, i will test in approx 12 hours if this fixes the permissions issue with docker containers and plex.

 

What is the reason for you to use uid 98 and gid 99 instead of the uid 99 and gid 99?

Link to comment
Posted (edited)
11 hours ago, Bolagnaise said:

@DZMM I @ you in this thread but for awareness of everyone else using RC, seems to be a permissions error with rc builds as LT updated how the permissions are managed from 6.9.2

 

 

Odd, I have been using the RC's right from 6.10 RC2 on and have never had a permission issue, no modifications to the base script. I did not upgrade from 6.9.2 or anything lower though, I did a fresh install of 6.10 RC2 and have been updating since then. That being said I did not let the script make any of my folders within the mergerfs folder, I made them myself after the script had everything mounted, maybe that is the difference in my case?

Edited by MadMatt337
Link to comment
10 hours ago, Kaizac said:

 

What is the reason for you to use uid 98 and gid 99 instead of the uid 99 and gid 99?

I tested 99/99, it did not work for me and the file permissions continued

 

If you run 

Quote

getent group | grep no

 in command line, you will see that Unraid uses 'USER NOBODY' on ID 98, and "USERGROUP NOBODY" on ID 99. At least for me it was

 

 

I woke up early and updated my server to RC7 and now it works fine, before none of my dockers utilizing the gdrive folders would work and threw file permission errors in the log.

Link to comment
54 minutes ago, Bolagnaise said:

I tested 99/99, it did not work for me and the file permissions continued

 

If you run 

 in command line, you will see that Unraid uses 'USER NOBODY' on ID 98, and "USERGROUP NOBODY" on ID 99. At least for me it was

 

 

I woke up early and updated my server to RC7 and now it works fine, before none of my dockers utilizing the gdrive folders would work and threw file permission errors in the log.

I'm on rc6 and I don't think I'm having any problems??

Link to comment
23 minutes ago, DZMM said:

I'm on rc6 and I don't think I'm having any problems??

 Yeah im not sure why this error has crept up, but i think it might have something to do with the patch notes from rc2 where it states

 

Quote

Fixed issue in User Share file system where permissions were not being honored.

 

This seems to have introduced a permissions issue for some people using rclone as there where no issues in rc1.

Link to comment
  • 2 weeks later...
On 5/4/2022 at 6:03 PM, Bolagnaise said:

As long as you are running rclone 1.58 or newer then rclone will continue to work normally. 

 

Essentially what is happening is google is deprecating the copy paste method for the client ID and secret from the admin console but only for ios,android and some other devices. The method rclone uses in 1.58 to re-authenticate to google is different. 

 

TLDR: Ensure your rclone plugin is up to date and everything will continue to work fine.

The rclone plug-in I am running in unRAID is by Waseh. It is up to date with a 2022.1.20 last update. However, reading through the change logs it seems like the last change log that mentions a version update is from 2017 mentioning a 1.3x rclone version. Is there a way to verify what version of rclone the plugin is running so I don’t get snagged by the oath issue? 

Link to comment

Anyone have a quick/dirty script to move the metadata from the g drive folders to local array? I foolishly didn't set the filters  - and am now thinking it might be better to have all metadata local ... I imagine faster loading, but more importantly, avoiding the 400K objects in team drives. 

Link to comment

Anyone getting this error after updating to Version: 6.10.1

 

21.05.2022 19:55:07 INFO: Creating local folders.
21.05.2022 19:55:07 INFO: Creating MergerFS folders.
21.05.2022 19:55:07 INFO: *** Starting mount of remote gdrive
21.05.2022 19:55:07 INFO: Checking if this script is already running.
21.05.2022 19:55:07 INFO: Script not running - proceeding.
21.05.2022 19:55:07 INFO: *** Checking if online
21.05.2022 19:55:08 PASSED: *** Internet online
21.05.2022 19:55:08 INFO: Success gdrive remote is already mounted.
21.05.2022 19:55:08 INFO: Mergerfs already installed, proceeding to create mergerfs mount
21.05.2022 19:55:08 INFO: Creating gdrive mergerfs mount.
mv: cannot move '/mnt/user/mount_mergerfs/gdrive' to '/mnt/user/local/gdrive/gdrive': File exists
fuse: mountpoint is not empty
fuse: if you are sure this is safe, use the 'nonempty' mount option
21.05.2022 19:55:08 INFO: Checking if gdrive mergerfs mount created.
21.05.2022 19:55:08 CRITICAL: gdrive mergerfs mount failed. Stopping dockers.
plex
Error response from daemon: No such container: nzbget
Error response from daemon: No such container: sonarr
Error response from daemon: No such container: radarr
Error response from daemon: No such container: ombi
Script Finished May 21, 2022 19:55.08

 

Script

#!/bin/bash

######################
#### Mount Script ####
######################
## Version 0.96.9.3 ##
######################

####### EDIT ONLY THESE SETTINGS #######

# INSTRUCTIONS
# 1. Change the name of the rclone remote and shares to match your setup
# 2. NOTE: enter RcloneRemoteName WITHOUT ':'
# 3. Optional: include custom command and bind mount settings
# 4. Optional: include extra folders in mergerfs mount

# REQUIRED SETTINGS
RcloneRemoteName="gdrive" # Name of rclone remote mount WITHOUT ':'. NOTE: Choose your encrypted remote for sensitive data
RcloneMountShare="/mnt/user/mount_rclone" # where your rclone remote will be located without trailing slash  e.g. /mnt/user/mount_rclone
RcloneMountDirCacheTime="720h" # rclone dir cache time
LocalFilesShare="/mnt/user/local" # location of the local files and MountFolders you want to upload without trailing slash to rclone e.g. /mnt/user/local. Enter 'ignore' to disable
RcloneCacheShare="/mnt/user0/mount_rclone" # location of rclone cache files without trailing slash e.g. /mnt/user0/mount_rclone
RcloneCacheMaxSize="400G" # Maximum size of rclone cache
RcloneCacheMaxAge="336h" # Maximum age of cache files
MergerfsMountShare="/mnt/user/mount_mergerfs" # location without trailing slash  e.g. /mnt/user/mount_mergerfs. Enter 'ignore' to disable
DockerStart="nzbget plex sonarr radarr ombi" # list of dockers, separated by space, to start once mergerfs mount verified. Remember to disable AUTOSTART for dockers added in docker settings page
MountFolders=\{"downloads/complete,downloads/intermediate,downloads/seeds,movies,tv"\} # comma separated list of folders to create within the mount

# Note: Again - remember to NOT use ':' in your remote name above

# OPTIONAL SETTINGS

# Add extra paths to mergerfs mount in addition to LocalFilesShare
LocalFilesShare2="ignore" # without trailing slash e.g. /mnt/user/other__remote_mount/or_other_local_folder.  Enter 'ignore' to disable
LocalFilesShare3="ignore"
LocalFilesShare4="ignore"

# Add extra commands or filters
Command1="--rc"
Command2=""
Command3=""
Command4=""
Command5=""
Command6=""
Command7=""
Command8=""

CreateBindMount="N" # Y/N. Choose whether to bind traffic to a particular network adapter
RCloneMountIP="192.168.1.252" # My unraid IP is 172.30.12.2 so I create another similar IP address
NetworkAdapter="eth0" # choose your network adapter. eth0 recommended
VirtualIPNumber="2" # creates eth0:x e.g. eth0:1.  I create a unique virtual IP addresses for each mount & upload so I can monitor and traffic shape for each of them

####### END SETTINGS #######

###############################################################################
#####   DO NOT EDIT ANYTHING BELOW UNLESS YOU KNOW WHAT YOU ARE DOING   #######
###############################################################################

####### Preparing mount location variables #######
RcloneMountLocation="$RcloneMountShare/$RcloneRemoteName" # Location for rclone mount
LocalFilesLocation="$LocalFilesShare/$RcloneRemoteName" # Location for local files to be merged with rclone mount
MergerFSMountLocation="$MergerfsMountShare/$RcloneRemoteName" # Rclone data folder location

####### create directories for rclone mount and mergerfs mounts #######
mkdir -p /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName # for script files
mkdir -p $RcloneCacheShare/cache/$RcloneRemoteName # for cache files
if [[  $LocalFilesShare == 'ignore' ]]; then
	echo "$(date "+%d.%m.%Y %T") INFO: Not creating local folders as requested."
	LocalFilesLocation="/tmp/$RcloneRemoteName"
	eval mkdir -p $LocalFilesLocation
else
	echo "$(date "+%d.%m.%Y %T") INFO: Creating local folders."
	eval mkdir -p $LocalFilesLocation/"$MountFolders"
fi
mkdir -p $RcloneMountLocation

if [[  $MergerfsMountShare == 'ignore' ]]; then
	echo "$(date "+%d.%m.%Y %T") INFO: Not creating MergerFS folders as requested."
else
	echo "$(date "+%d.%m.%Y %T") INFO: Creating MergerFS folders."
	mkdir -p $MergerFSMountLocation
fi


#######  Check if script is already running  #######
echo "$(date "+%d.%m.%Y %T") INFO: *** Starting mount of remote ${RcloneRemoteName}"
echo "$(date "+%d.%m.%Y %T") INFO: Checking if this script is already running."
if [[ -f "/mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running" ]]; then
	echo "$(date "+%d.%m.%Y %T") INFO: Exiting script as already running."
	exit
else
	echo "$(date "+%d.%m.%Y %T") INFO: Script not running - proceeding."
	touch /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running
fi

####### Checking have connectivity #######

echo "$(date "+%d.%m.%Y %T") INFO: *** Checking if online"
ping -q -c2 google.com > /dev/null # -q quiet, -c number of pings to perform
if [ $? -eq 0 ]; then # ping returns exit status 0 if successful
	echo "$(date "+%d.%m.%Y %T") PASSED: *** Internet online"
else
	echo "$(date "+%d.%m.%Y %T") FAIL: *** No connectivity.  Will try again on next run"
	rm /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running
	exit
fi

#######  Create Rclone Mount  #######

# Check If Rclone Mount Already Created
if [[ -f "$RcloneMountLocation/mountcheck" ]]; then
	echo "$(date "+%d.%m.%Y %T") INFO: Success ${RcloneRemoteName} remote is already mounted."
else
	echo "$(date "+%d.%m.%Y %T") INFO: Mount not running. Will now mount ${RcloneRemoteName} remote."
# Creating mountcheck file in case it doesn't already exist
	echo "$(date "+%d.%m.%Y %T") INFO: Recreating mountcheck file for ${RcloneRemoteName} remote."
	touch mountcheck
	rclone copy mountcheck $RcloneRemoteName: -vv --no-traverse
# Check bind option
	if [[  $CreateBindMount == 'Y' ]]; then
		echo "$(date "+%d.%m.%Y %T") INFO: *** Checking if IP address ${RCloneMountIP} already created for remote ${RcloneRemoteName}"
		ping -q -c2 $RCloneMountIP > /dev/null # -q quiet, -c number of pings to perform
		if [ $? -eq 0 ]; then # ping returns exit status 0 if successful
			echo "$(date "+%d.%m.%Y %T") INFO: *** IP address ${RCloneMountIP} already created for remote ${RcloneRemoteName}"
		else
			echo "$(date "+%d.%m.%Y %T") INFO: *** Creating IP address ${RCloneMountIP} for remote ${RcloneRemoteName}"
			ip addr add $RCloneMountIP/24 dev $NetworkAdapter label $NetworkAdapter:$VirtualIPNumber
		fi
		echo "$(date "+%d.%m.%Y %T") INFO: *** Created bind mount ${RCloneMountIP} for remote ${RcloneRemoteName}"
	else
		RCloneMountIP=""
		echo "$(date "+%d.%m.%Y %T") INFO: *** Creating mount for remote ${RcloneRemoteName}"
	fi
# create rclone mount
	rclone mount \
	$Command1 $Command2 $Command3 $Command4 $Command5 $Command6 $Command7 $Command8 \
	--allow-other \
	--umask 000 \
	--dir-cache-time $RcloneMountDirCacheTime \
	--attr-timeout $RcloneMountDirCacheTime \
	--log-level INFO \
	--poll-interval 10s \
	--cache-dir=$RcloneCacheShare/cache/$RcloneRemoteName \
	--drive-pacer-min-sleep 10ms \
	--drive-pacer-burst 1000 \
	--vfs-cache-mode full \
	--vfs-cache-max-size $RcloneCacheMaxSize \
	--vfs-cache-max-age $RcloneCacheMaxAge \
	--vfs-read-ahead 1G \
	--bind=$RCloneMountIP \
	$RcloneRemoteName: $RcloneMountLocation &

# Check if Mount Successful
	echo "$(date "+%d.%m.%Y %T") INFO: sleeping for 5 seconds"
# slight pause to give mount time to finalise
	sleep 5
	echo "$(date "+%d.%m.%Y %T") INFO: continuing..."
	if [[ -f "$RcloneMountLocation/mountcheck" ]]; then
		echo "$(date "+%d.%m.%Y %T") INFO: Successful mount of ${RcloneRemoteName} mount."
	else
		echo "$(date "+%d.%m.%Y %T") CRITICAL: ${RcloneRemoteName} mount failed - please check for problems.  Stopping dockers"
		docker stop $DockerStart
		rm /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running
		exit
	fi
fi

####### Start MergerFS Mount #######

if [[  $MergerfsMountShare == 'ignore' ]]; then
	echo "$(date "+%d.%m.%Y %T") INFO: Not creating mergerfs mount as requested."
else
	if [[ -f "$MergerFSMountLocation/mountcheck" ]]; then
		echo "$(date "+%d.%m.%Y %T") INFO: Check successful, ${RcloneRemoteName} mergerfs mount in place."
	else
# check if mergerfs already installed
		if [[ -f "/bin/mergerfs" ]]; then
			echo "$(date "+%d.%m.%Y %T") INFO: Mergerfs already installed, proceeding to create mergerfs mount"
		else
# Build mergerfs binary
			echo "$(date "+%d.%m.%Y %T") INFO: Mergerfs not installed - installing now."
			mkdir -p /mnt/user/appdata/other/rclone/mergerfs
			docker run -v /mnt/user/appdata/other/rclone/mergerfs:/build --rm trapexit/mergerfs-static-build
			mv /mnt/user/appdata/other/rclone/mergerfs/mergerfs /bin
# check if mergerfs install successful
			echo "$(date "+%d.%m.%Y %T") INFO: *sleeping for 5 seconds"
			sleep 5
			if [[ -f "/bin/mergerfs" ]]; then
				echo "$(date "+%d.%m.%Y %T") INFO: Mergerfs installed successfully, proceeding to create mergerfs mount."
			else
				echo "$(date "+%d.%m.%Y %T") ERROR: Mergerfs not installed successfully.  Please check for errors.  Exiting."
				rm /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running
				exit
			fi
		fi
# Create mergerfs mount
		echo "$(date "+%d.%m.%Y %T") INFO: Creating ${RcloneRemoteName} mergerfs mount."
# Extra Mergerfs folders
		if [[  $LocalFilesShare2 != 'ignore' ]]; then
			echo "$(date "+%d.%m.%Y %T") INFO: Adding ${LocalFilesShare2} to ${RcloneRemoteName} mergerfs mount."
			LocalFilesShare2=":$LocalFilesShare2"
		else
			LocalFilesShare2=""
		fi
		if [[  $LocalFilesShare3 != 'ignore' ]]; then
			echo "$(date "+%d.%m.%Y %T") INFO: Adding ${LocalFilesShare3} to ${RcloneRemoteName} mergerfs mount."
			LocalFilesShare3=":$LocalFilesShare3"
		else
			LocalFilesShare3=""
		fi
		if [[  $LocalFilesShare4 != 'ignore' ]]; then
			echo "$(date "+%d.%m.%Y %T") INFO: Adding ${LocalFilesShare4} to ${RcloneRemoteName} mergerfs mount."
			LocalFilesShare4=":$LocalFilesShare4"
		else
			LocalFilesShare4=""
		fi
# make sure mergerfs mount point is empty
		mv $MergerFSMountLocation $LocalFilesLocation
		mkdir -p $MergerFSMountLocation
# mergerfs mount command
		mergerfs $LocalFilesLocation:$RcloneMountLocation$LocalFilesShare2$LocalFilesShare3$LocalFilesShare4 $MergerFSMountLocation -o rw,async_read=false,use_ino,allow_other,func.getattr=newest,category.action=all,category.create=ff,cache.files=partial,dropcacheonclose=true
# check if mergerfs mount successful
		echo "$(date "+%d.%m.%Y %T") INFO: Checking if ${RcloneRemoteName} mergerfs mount created."
		if [[ -f "$MergerFSMountLocation/mountcheck" ]]; then
			echo "$(date "+%d.%m.%Y %T") INFO: Check successful, ${RcloneRemoteName} mergerfs mount created."
		else
			echo "$(date "+%d.%m.%Y %T") CRITICAL: ${RcloneRemoteName} mergerfs mount failed.  Stopping dockers."
			docker stop $DockerStart
			rm /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running
			exit
		fi
	fi
fi

####### Starting Dockers That Need Mergerfs Mount To Work Properly #######

# only start dockers once
if [[ -f "/mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/dockers_started" ]]; then
	echo "$(date "+%d.%m.%Y %T") INFO: dockers already started."
else
# Check CA Appdata plugin not backing up or restoring
	if [ -f "/tmp/ca.backup2/tempFiles/backupInProgress" ] || [ -f "/tmp/ca.backup2/tempFiles/restoreInProgress" ] ; then
		echo "$(date "+%d.%m.%Y %T") INFO: Appdata Backup plugin running - not starting dockers."
	else
		touch /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/dockers_started
		echo "$(date "+%d.%m.%Y %T") INFO: Starting dockers."
		docker start $DockerStart
	fi
fi

rm /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running
echo "$(date "+%d.%m.%Y %T") INFO: Script complete"

exit

 

Link to comment
4 hours ago, hinduguy said:

21.05.2022 19:55:08 INFO: Creating gdrive mergerfs mount.
mv: cannot move '/mnt/user/mount_mergerfs/gdrive' to '/mnt/user/local/gdrive/gdrive': File exists
fuse: mountpoint is not empty

Manually move whatever files are already in the mountpoint and then run the script again

Link to comment

Did anyone else get the new email about the Workspace migration and G Suite legacy continuing to be free? I'm so happy as it was going to cost me a small fortune as my family all use and a massive amount of time to help them all move!!

image.thumb.png.efe6a8a3c311f5f64c0dc1a0f05dfbd3.png

Link to comment
6 minutes ago, DZMM said:

Did anyone else get the new email about the Workspace migration and G Suite legacy continuing to be free? I'm so happy as it was going to cost me a small fortune as my family all use and a massive amount of time to help them all move!!

image.thumb.png.efe6a8a3c311f5f64c0dc1a0f05dfbd3.png

my other account that has my storage on and just 1 user got moved to Enterprise Standard for £15.30/mth when the offer period ends which I can live with as the effort to move so much data and get everything working again will be massive:

image.thumb.png.bc3b2ee009f7d496b4911e8c97b02417.png

Link to comment
2 hours ago, DZMM said:

my other account that has my storage on and just 1 user got moved to Enterprise Standard for £15.30/mth when the offer period ends which I can live with as the effort to move so much data and get everything working again will be massive:

image.thumb.png.bc3b2ee009f7d496b4911e8c97b02417.png

 

Funny I started uploading a lot recently, as I'm moving to an area that doesn't offer symetrical Gig service... One day after I started uploading, I got the email that I was moved. I thought the increase in usage triggered it. 

Link to comment
6 hours ago, DZMM said:

Did anyone else get the new email about the Workspace migration and G Suite legacy continuing to be free? I'm so happy as it was going to cost me a small fortune as my family all use and a massive amount of time to help them all move!!

 

I migrated over to ZohoMail a few months ago. I plan on staying there despite Google continuing their free offers. Zoho's Free offering allows for upto 5 accounts. You can still send emails via SMTP. The only possible downside is the free accounts do not offer imap/pop3 services. However their Android App for mail is pretty solid and not much different from the GMAIL app.

 

The setup guide and migration guide were easy to follow and documented everything that had to be done.

 

The pay tiers are pretty reasonable too, plans from $1 User/Month to $4 User/Month for Mail. They also have a workplace plan that includes online apps like word processing and spreadsheets.

Link to comment
7 hours ago, DZMM said:

my other account that has my storage on and just 1 user got moved to Enterprise Standard for £15.30/mth when the offer period ends which I can live with as the effort to move so much data and get everything working again will be massive:

image.thumb.png.bc3b2ee009f7d496b4911e8c97b02417.png

 

Did you notice they updated services summary to 5TB for 5 or more users instead of unlimited? I feel like restrictions will be coming in the future...

Enterprise Standard.png

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.