John_M Posted November 15, 2018 Share Posted November 15, 2018 21 hours ago, sjaak said: hmm, then i only watch the Tdie temperature and ignore the other one, the MB bios gifs me a lot of information about the chipset, system 1 & 2 vram, PCIe1 & PCIe2. not sure if it is just a Unraid "problem" or a threadrippper/Gigabyte "problem". it would be really handy to read those temperatures real time. The k10temp module only reads the CPU sensors. If you want to monitor motherboard temperatures and fan speeds you need to load the module for the super I/O chip. In my case it's the it87 module (with a forced device ID) but see here: https://www.phoronix.com/scan.php?page=news_item&px=IT87-Linux-Driver-Axing Hopefully someone forked the code before he deleted it. Quote Link to comment
sjaak Posted November 16, 2018 Share Posted November 16, 2018 13 hours ago, John_M said: The k10temp module only reads the CPU sensors. If you want to monitor motherboard temperatures and fan speeds you need to load the module for the super I/O chip. In my case it's the it87 module (with a forced device ID) but see here: https://www.phoronix.com/scan.php?page=news_item&px=IT87-Linux-Driver-Axing Hopefully someone forked the code before he deleted it. i just set IT87, and indeed, now i have some voltage, fan speed (not al) en 3 temperture sensors. it8792-isa-0a60 Adapter: ISA adapter in0: +1.19 V (min = +0.00 V, max = +2.78 V) in1: +1.50 V (min = +0.00 V, max = +2.78 V) in2: +1.04 V (min = +0.00 V, max = +2.78 V) in3: +2.00 V (min = +0.00 V, max = +2.78 V) in4: +1.78 V (min = +0.00 V, max = +2.78 V) in5: +1.49 V (min = +0.00 V, max = +2.78 V) in6: +2.78 V (min = +0.00 V, max = +2.78 V) ALARM 3VSB: +1.66 V (min = +0.00 V, max = +2.78 V) Vbat: +0.00 V fan1: 419 RPM (min = 0 RPM) fan2: 693 RPM (min = 0 RPM) fan3: 386 RPM (min = 0 RPM) temp1: +35.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor temp2: -55.0°C (low = +127.0°C, high = +127.0°C) sensor = Intel PECI temp3: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor intrusion0: ALARM im still not sure with driver i need to use... i dont know the driver names to type in the Dynamic systeem temp plugin... Quote Link to comment
perhansen Posted November 17, 2018 Share Posted November 17, 2018 Just updated from 6.6.3. Everything seems fine. Will keep an close eye on it the next days. Thanks for great work limetech and co. Sent from my iPhone using Tapatalk Quote Link to comment
highdefinitely Posted November 19, 2018 Share Posted November 19, 2018 I am experiencing random freezes / "lockups" with this version as well. Only a hard reset / shutdown helps. unserver-diagnostics-20181119-1120.zip Quote Link to comment
trurl Posted November 19, 2018 Share Posted November 19, 2018 7 hours ago, highdefinitely said: I am experiencing random freezes / "lockups" with this version as well. Only a hard reset / shutdown helps. Diagnostics are immediately after reboot. Take a look here for more ideas on how to get something closer to the actual event: Quote Link to comment
ufopinball Posted November 20, 2018 Share Posted November 20, 2018 Upgraded yesterday from 6.6.0 to 6.6.5. No issues so far, and no problems starting Dockers or VMs. Thanks again, LT! Quote Link to comment
DigitalMaestro Posted November 21, 2018 Share Posted November 21, 2018 Upgraded a few days ago from 6.5.3 to 6.6.5. Everything has been running smoothly since (including Dockers and VMs). Cheers DM Quote Link to comment
cammelspit Posted November 21, 2018 Share Posted November 21, 2018 I upgraded late last week, had to do a lot of validation because I was suffering from the Realtek network dropping the issue. Turns out 6.6.5 works perfectly fine and I've been running full tilt, like always. Finally get to enjoy the new UI! 😜 Quote Link to comment
abs0lut.zer0 Posted November 22, 2018 Share Posted November 22, 2018 Hey Guys Just realised there was an update after not looking for a while as it normally pops up for me but not this time and I seem to be quite a few versions out. I have tried the update os from firefox 63.0.3 and edge that comes with win10 1807 and no go. I then try the plg script and this happens ...I don't really think there is a network problem as the server refreshes the dockers and I am using the same internet to send this mail.. any help please [the log file has NO references to anything related to the update ] Nov 22 15:43:06 Terok-Nor emhttpd: req (16): cmd=/plugins/dynamix.plugin.manager/scripts/plugin&arg1=install&arg2=https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg&csrf_token=**************** Nov 22 15:43:06 Terok-Nor emhttpd: cmd: /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugin install https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg Nov 22 15:54:35 Terok-Nor emhttpd: req (18): cmd=/plugins/dynamix.plugin.manager/scripts/plugin&arg1=install&arg2=https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg&csrf_token=**************** Nov 22 15:54:35 Terok-Nor emhttpd: cmd: /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugin install https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg thank you.... Quote Link to comment
bonienl Posted November 22, 2018 Share Posted November 22, 2018 The network issue could be at either side. Wait a while and try again. Quote Link to comment
abs0lut.zer0 Posted November 22, 2018 Share Posted November 22, 2018 hey bonienl thanks a LOT for the quick reply have been trying for over 7 hours now on and off as that was my first thought as well... so I will keep trying for the rest of today it's now 16:11 SAST Thursday and then get back to this thread on Friday morning. Thanks once again for the quick reply appreciated Quote Link to comment
Cessquill Posted November 22, 2018 Share Posted November 22, 2018 Out of interest, do you get anything from a browser if you go to https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg ? Quote Link to comment
abs0lut.zer0 Posted November 22, 2018 Share Posted November 22, 2018 (edited) This XML file does not appear to have any style information associated with it. The document tree is shown below. <PLUGIN name="unRAIDServer" author="LimeTech" version="6.6.5" category="stable" pluginURL="https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg"><CHANGES> ### Version 6.6.5 2018-11-08 Management: blah blah everything is there... Edited November 23, 2018 by abs0lut.zer0 shortening a long post Quote Link to comment
itimpi Posted November 22, 2018 Share Posted November 22, 2018 You can always try the manual method of downloading the ZIP file of the release and then extracting all the bz* type files overwriting the ones currently on the USB stick. 1 Quote Link to comment
abs0lut.zer0 Posted November 22, 2018 Share Posted November 22, 2018 21 minutes ago, itimpi said: You can always try the manual method of downloading the ZIP file of the release and then extracting all the bz* type files overwriting the ones currently on the USB stick. this is true i supposed we've been spoiled Quote Link to comment
abs0lut.zer0 Posted November 22, 2018 Share Posted November 22, 2018 does this also give you rollback feature if things go south? 33 minutes ago, itimpi said: You can always try the manual method of downloading the ZIP file of the release and then extracting all the bz* type files overwriting the ones currently on the USB stick. Quote Link to comment
wgstarks Posted November 22, 2018 Share Posted November 22, 2018 2 minutes ago, abs0lut.zer0 said: does this also give you rollback feature if things go south? Copy the old bz files to the Previous folder. That way they’re saved if you need them. 1 Quote Link to comment
Squid Posted November 22, 2018 Share Posted November 22, 2018 2 hours ago, abs0lut.zer0 said: Hey Guys Just realised there was an update after not looking for a while as it normally pops up for me but not this time and I seem to be quite a few versions out. I have tried the update os from firefox 63.0.3 and edge that comes with win10 1807 and no go. I then try the plg script and this happens ...I don't really think there is a network problem as the server refreshes the dockers and I am using the same internet to send this mail.. any help please [the log file has NO references to anything related to the update ] Nov 22 15:43:06 Terok-Nor emhttpd: req (16): cmd=/plugins/dynamix.plugin.manager/scripts/plugin&arg1=install&arg2=https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg&csrf_token=**************** Nov 22 15:43:06 Terok-Nor emhttpd: cmd: /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugin install https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg Nov 22 15:54:35 Terok-Nor emhttpd: req (18): cmd=/plugins/dynamix.plugin.manager/scripts/plugin&arg1=install&arg2=https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg&csrf_token=**************** Nov 22 15:54:35 Terok-Nor emhttpd: cmd: /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugin install https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg thank you.... Odds on, its you gateway in network settings isn't pointed at the router, or you may need static DNS addresses set (8.8.8.8 and 8.8.4.4) 1 Quote Link to comment
abs0lut.zer0 Posted November 22, 2018 Share Posted November 22, 2018 10 minutes ago, Squid said: Odds on, its you gateway in network settings isn't pointed at the router, or you may need static DNS addresses set (8.8.8.8 and 8.8.4.4) yup this is true you ARE 100% correct my good human.. Quote Link to comment
abs0lut.zer0 Posted November 22, 2018 Share Posted November 22, 2018 busy updating now Quote Link to comment
abs0lut.zer0 Posted November 22, 2018 Share Posted November 22, 2018 THANK you did not even factor in my brain... Quote Link to comment
abs0lut.zer0 Posted November 22, 2018 Share Posted November 22, 2018 (edited) recently changed the config of my network around and the default gateway was changed ... forgot to update THE most important network device in my network SORRY TO WASTE EVERYBODY'S TIME thanks all for helping and taking the time to read.... appreciate the best BEST community on the interweb... {should I delete my posts?} Edited November 23, 2018 by abs0lut.zer0 stupidity Quote Link to comment
Squid Posted November 22, 2018 Share Posted November 22, 2018 22 minutes ago, abs0lut.zer0 said: human Close, but no cigar 8 minutes ago, abs0lut.zer0 said: {should I delete my posts?} Leave them. Maybe someone else will have the same issue 1 Quote Link to comment
jowi Posted November 23, 2018 Share Posted November 23, 2018 (edited) Every time a new release is announced all the issues that pop up scare the hell out of me. Also with this one. And everytime i decide to skip the update. I keep my 6.5.3 version. Works perfectly. I'll check the updates again in half a year or so. These new versions arriving weekly is nonsens. Every other week another buggy release... just wait a bit longer, test it and release something that actually works. Looks like you guys commited to bi weekly agile scrum deployments or something.... you *must* release something evey 2 weeks. Stop that. Just do what you did before and release proper versions. Edited November 23, 2018 by jowi 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.