Jump to content
limetech

Unraid OS version 6.6.5 available

115 posts in this topic Last Reply

Recommended Posts

21 hours ago, sjaak said:

hmm, then i only watch the Tdie temperature and ignore the other one, the MB bios gifs me a lot of information about the chipset, system 1 & 2 vram, PCIe1 & PCIe2. not sure if it is just a Unraid "problem" or a threadrippper/Gigabyte "problem". it would be really handy to read those temperatures real time.

The k10temp module only reads the CPU sensors. If you want to monitor motherboard temperatures and fan speeds you need to load the module for the super I/O chip. In my case it's the it87 module (with a forced device ID) but see here: https://www.phoronix.com/scan.php?page=news_item&px=IT87-Linux-Driver-Axing Hopefully someone forked the code before he deleted it.

 

Share this post


Link to post
13 hours ago, John_M said:

The k10temp module only reads the CPU sensors. If you want to monitor motherboard temperatures and fan speeds you need to load the module for the super I/O chip. In my case it's the it87 module (with a forced device ID) but see here: https://www.phoronix.com/scan.php?page=news_item&px=IT87-Linux-Driver-Axing Hopefully someone forked the code before he deleted it.

 

i just set IT87, and indeed, now i have some voltage, fan speed (not al) en 3 temperture sensors.

it8792-isa-0a60
Adapter: ISA adapter
in0:          +1.19 V  (min =  +0.00 V, max =  +2.78 V)
in1:          +1.50 V  (min =  +0.00 V, max =  +2.78 V)
in2:          +1.04 V  (min =  +0.00 V, max =  +2.78 V)
in3:          +2.00 V  (min =  +0.00 V, max =  +2.78 V)
in4:          +1.78 V  (min =  +0.00 V, max =  +2.78 V)
in5:          +1.49 V  (min =  +0.00 V, max =  +2.78 V)
in6:          +2.78 V  (min =  +0.00 V, max =  +2.78 V)  ALARM
3VSB:         +1.66 V  (min =  +0.00 V, max =  +2.78 V)
Vbat:         +0.00 V  
fan1:         419 RPM  (min =    0 RPM)
fan2:         693 RPM  (min =    0 RPM)
fan3:         386 RPM  (min =    0 RPM)
temp1:        +35.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp2:        -55.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = Intel PECI
temp3:        +34.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
intrusion0:  ALARM

 

im still not sure with driver i need to use... i dont know the driver names to type in the Dynamic systeem temp plugin...

Share this post


Link to post

Just updated from 6.6.3. Everything seems fine. Will keep an close eye on it the next days. Thanks for great work limetech and co.


Sent from my iPhone using Tapatalk

Share this post


Link to post
7 hours ago, highdefinitely said:

I am experiencing random freezes / "lockups" with this version as well. Only a hard reset / shutdown helps.

Diagnostics are immediately after reboot. Take a look here for more ideas on how to get something closer to the actual event:

 

 

Share this post


Link to post

I upgraded late last week, had to do a lot of validation because I was suffering from the Realtek network dropping the issue. Turns out 6.6.5 works perfectly fine and I've been running full tilt, like always. Finally get to enjoy the new UI! 😜

Share this post


Link to post

Hey Guys

 

Just realised there was an update after not looking for a while as it normally pops up for me but not this time and I seem to be quite a few versions out.

I have tried the update os from firefox 63.0.3 and edge that comes with win10 1807 and no go.

I then try the plg script and this happens

...I don't really think there is a network problem as the server refreshes the dockers and I am using the same internet to send this mail..

 

any help please [the log file has NO references to anything related to the update :/ ]

 

Nov 22 15:43:06 Terok-Nor emhttpd: req (16): cmd=/plugins/dynamix.plugin.manager/scripts/plugin&arg1=install&arg2=https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg&csrf_token=****************
Nov 22 15:43:06 Terok-Nor emhttpd: cmd: /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugin install https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg
Nov 22 15:54:35 Terok-Nor emhttpd: req (18): cmd=/plugins/dynamix.plugin.manager/scripts/plugin&arg1=install&arg2=https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg&csrf_token=****************
Nov 22 15:54:35 Terok-Nor emhttpd: cmd: /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugin install https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg

 

 

thank you....

image.thumb.png.a92183a1507914601bea43bc72eade41.png

Share this post


Link to post

hey bonienl thanks a LOT for the quick reply

have been trying for over 7 hours now on and off as that was my first thought as well...

 

so I will keep trying for the rest of today it's now 16:11 SAST Thursday and then get back to this thread on Friday morning.

 

Thanks once again for the quick reply appreciated :)

Share this post


Link to post

This XML file does not appear to have any style information associated with it. The document tree is shown below.
        <PLUGIN name="unRAIDServer" author="LimeTech" version="6.6.5" category="stable" pluginURL="https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg"><CHANGES>
### Version 6.6.5 2018-11-08

Management:

blah blah

 

everything is there...

 

Edited by abs0lut.zer0
shortening a long post

Share this post


Link to post

You can always try the manual method of downloading the ZIP file of the release and then extracting all the bz* type files overwriting the ones currently on the USB stick.

Share this post


Link to post
21 minutes ago, itimpi said:

You can always try the manual method of downloading the ZIP file of the release and then extracting all the bz* type files overwriting the ones currently on the USB stick.

this is true i supposed we've been spoiled :)

Share this post


Link to post

does this also give you rollback feature if things go south?

33 minutes ago, itimpi said:

You can always try the manual method of downloading the ZIP file of the release and then extracting all the bz* type files overwriting the ones currently on the USB stick.

 

Share this post


Link to post
2 minutes ago, abs0lut.zer0 said:

does this also give you rollback feature if things go south?

 

Copy the old bz files to the Previous folder. That way they’re saved if you need them.

Share this post


Link to post
2 hours ago, abs0lut.zer0 said:

Hey Guys

 

Just realised there was an update after not looking for a while as it normally pops up for me but not this time and I seem to be quite a few versions out.

I have tried the update os from firefox 63.0.3 and edge that comes with win10 1807 and no go.

I then try the plg script and this happens

...I don't really think there is a network problem as the server refreshes the dockers and I am using the same internet to send this mail..

 

any help please [the log file has NO references to anything related to the update :/ ]

 

Nov 22 15:43:06 Terok-Nor emhttpd: req (16): cmd=/plugins/dynamix.plugin.manager/scripts/plugin&arg1=install&arg2=https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg&csrf_token=****************
Nov 22 15:43:06 Terok-Nor emhttpd: cmd: /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugin install https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg
Nov 22 15:54:35 Terok-Nor emhttpd: req (18): cmd=/plugins/dynamix.plugin.manager/scripts/plugin&arg1=install&arg2=https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg&csrf_token=****************
Nov 22 15:54:35 Terok-Nor emhttpd: cmd: /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugin install https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg

 

 

thank you....

image.thumb.png.a92183a1507914601bea43bc72eade41.png

Odds on, its you gateway in network settings isn't pointed at the router, or you may need static DNS addresses set (8.8.8.8 and 8.8.4.4)

Share this post


Link to post
10 minutes ago, Squid said:

Odds on, its you gateway in network settings isn't pointed at the router, or you may need static DNS addresses set (8.8.8.8 and 8.8.4.4)

yup this is true you ARE 100% correct my good human.. :)

Share this post


Link to post

recently changed the config of my network around and the default gateway was changed ... :/

 

forgot to update THE most important network device in my network :)

 

SORRY TO WASTE EVERYBODY'S TIME

 

thanks all for helping and taking the time to read....

 

appreciate the best BEST community on the interweb...

 

 

{should I delete my posts?}

Edited by abs0lut.zer0
stupidity

Share this post


Link to post
22 minutes ago, abs0lut.zer0 said:

human

Close, but no cigar ;) 

 

8 minutes ago, abs0lut.zer0 said:

{should I delete my posts?}

Leave them.  Maybe someone else will have the same issue

Share this post


Link to post

Every time a new release is announced all the issues that pop up scare the hell out of me. Also with this one. And everytime i decide to skip the update. I keep my 6.5.3 version. Works perfectly.  I'll check the updates again in half a year or so. These new versions arriving weekly is nonsens. Every other week another buggy release... just wait a bit longer, test it and release something that actually works. Looks like you guys commited to bi weekly agile scrum deployments or something.... you *must* release something evey 2 weeks. Stop that. Just do what you did before and release proper versions.

Edited by jowi

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.