November 10, 20187 yr I have had a few times that my dockers are being restored at night. Example I change my deluge client for autoextract (rar files) well now today the add-on is gone. I have had other dockers loose this info too I just cant think of examples right now. The system has not been rebooted for couple days and I made changes last night that were reverted. Any help? ruby-diagnostics-20181110-0718.zip
November 10, 20187 yr 18 minutes ago, scubieman said: The system has not been rebooted for couple days The system has only been up for 5 hours not a couple of days. Nov 10 02:34:47 Ruby emhttpd: unclean shutdown detected And may be rebooting on its own (bad RAM or PS?) If the changes you are making to your containers cannot handle a stop / restart of the container (ie: a reboot or the Appdata Backup plugin running), then you're possibly doing whatever wrong and should post in say Deluge's support thread.
November 10, 20187 yr Author I'll need to check uptime. Should not rebootedSent from my Pixel 2 XL using Tapatalk
November 11, 20187 yr Author 10 hours ago, Squid said: The system has only been up for 5 hours not a couple of days. Nov 10 02:34:47 Ruby emhttpd: unclean shutdown detected And may be rebooting on its own (bad RAM or PS?) If the changes you are making to your containers cannot handle a stop / restart of the container (ie: a reboot or the Appdata Backup plugin running), then you're possibly doing whatever wrong and should post in say Deluge's support thread. Could it be the CA backup doing this? I notice it runs at night
November 11, 20187 yr 10 minutes ago, scubieman said: Could it be the CA backup doing this? I notice it runs at night AFAIK, CA Backup would never reboot the server.
November 11, 20187 yr 40 minutes ago, BRiT said: AFAIK, CA Backup would never reboot the server. ^^^ This. And your diagnostics showed it rebooted before the backup ran and the backup completed
November 11, 20187 yr Author ^^^ This. And your diagnostics showed it rebooted before the backup ran and the backup completedThis could be a pain in butt to trouble shoot. It's been up for 20 hours. Before this multiple days.Last thing added was new hard drive. I have r710 with 24g of ram so trouble shooting would be night mare. Sent from my Pixel 2 XL using Tapatalk
November 11, 20187 yr Is your PSU powerful enough to handle the additional load with added disk drives?
November 11, 20187 yr Author 3 hours ago, bonienl said: Is your PSU powerful enough to handle the additional load with added disk drives? i think 900w dual power supply. Running 5 drives. but its design for 8
November 11, 20187 yr Author system up for 1 day 6 hours. Not sure if it was a fluke or a problem coming up. hope it was a fluke...
November 11, 20187 yr 42 minutes ago, scubieman said: hope it was a fluke... It will have a genuine cause. Have you run memtest on your RAM?
November 11, 20187 yr Author 1 hour ago, John_M said: It will have a genuine cause. Have you run memtest on your RAM? Do i download as a bootable USB to run?
November 11, 20187 yr 5 minutes ago, scubieman said: Do i download as a bootable USB to run? It is one of the option on the UnRAID Boot Menu (assuming you have a locally attached keyboard and monitor).
November 11, 20187 yr 8 minutes ago, itimpi said: It is one of the option on the UnRAID Boot Menu (assuming you have a locally attached keyboard and monitor). ...and are using legacy boot. The built in version doesn't work if you UEFI boot. Because I use it a lot I made a separate bootable USB key with the newer free version which does UEFI boot and gives more options.
November 11, 20187 yr Author Running memtest now. Hope it treats me good!Sent from my Pixel 2 XL using Tapatalk
November 11, 20187 yr Looks like you may have some concrete / drywall problems, and you have a similar approach as myself to wiring, but thus far the memtest does look ok, but the more passes the better
November 11, 20187 yr Author Looks like you may have some concrete / drywall problems, and you have a similar approach as myself to wiring, but thus far the memtest does look ok, but the more passes the betterHow many you recommend?I have my server in furnance room. Not sure how to clean up these cables since it just sits on a shelf.Sent from my Pixel 2 XL using Tapatalk
November 11, 20187 yr 6 minutes ago, scubieman said: Not sure how to clean up these cables since it just sits on a shelf. The wife calls me a slob, but my argument is that I take cross-talk on cabling very seriously, so I agree with you 7 minutes ago, scubieman said: How many you recommend? Personally, I'm happy with a single pass if there's no problems I'm trying to eliminate. But general consensus is 24 hours. I just don't have that kind of patience.
November 11, 20187 yr Author 1 minute ago, Squid said: The wife calls me a slob, but my argument is that I take cross-talk on cabling very seriously, so I agree with you Personally, I'm happy with a single pass if there's no problems I'm trying to eliminate. But general consensus is 24 hours. I just don't have that kind of patience. thats awesome.. Anything else should i run test on? or just wait and see if it does it again? Out of the 14 days its been running only once was a random reboot. Rest were planned.
November 11, 20187 yr Just now, scubieman said: Out of the 14 days its been running only once was a random reboot. Rest were planned. Obvious question is do you have a UPS? Is your BIOS set to stay off in the event of a power failure?
November 11, 20187 yr Author Well i dont have a UPS on this right now. However my other computer does have UPS and it didnt show anything. However thats on a different breaker. When you checked logs it looks like it straight up quit. So many it was a power issue? Only running about 250 watts out of that socket so my server is not really running hard. My router is plugged into the same thing as my server and that shows uptime of 3 weeks. But not sure if it would notice a electric hiccup as much as a server.. Hoping to buy another UPS for black friday.
November 14, 20187 yr Author Once again ONLY my binhex-delugevpn was stored. All it does is change my plug-ins. I am not 100% what is doing it. System uptime over a day. I tried invoking mover to see if that was causing it and nothing. I'm at a loss. I prefer not to uninstall and reinstall if possible(docker). Any ideas?
November 14, 20187 yr I notice that you do not have a cache drive. Check all of your path mappings in the various docker containers, and ensure that none of them reference /mnt/cache/... I noticed yesterday that pretty much all of @binhex's apps have references for the /data mapping directly referencing /mnt/cache instead of /mnt/user which when installing if the user doesn't notice causes havoc on the system.
Archived
This topic is now archived and is closed to further replies.