[Support] binhex - qBittorrentVPN


Recommended Posts

16 minutes ago, Elmojo said:

Yeah, my qBT config file looks like the example you posted.
I'm not sure that it's Radarr causing it, since I'm pretty sure I saw the funky nested folders popping up before I edited the paths in Radarr.  I might be wrong about that, but I don't think so.  Also, I believe I see the folders where Radarr is dropping stuff, and it's not those, it's elsewhere.

They may just be old folders that were created due to improper settings an are no longer being used. You might just keep an eye on them for changes. If you see any that'll give you a clue to which docker is the culprit.

Link to comment
26 minutes ago, wgstarks said:

They may just be old folders that were created due to improper settings an are no longer being used. You might just keep an eye on them for changes. If you see any that'll give you a clue to which docker is the culprit.

Nope, they're brand new. I keep a pretty close eye on my drives.  They didn't exist until we made those changes today, then they started popping up. Some have downloaded files in them, some are empty.  It's weird, and a mess. lol

Link to comment
44 minutes ago, JonathanM said:

Sounds like you missed the opening / when you changed the path to /data

I don't think I did. Please take a look at the screenshots I posted, if you have a moment. Do they look correct to you?  This whole thing is just baffling, and super frustrating.  It was all working so well, and now it's a hot mess.

Edited by Elmojo
Link to comment
21 hours ago, Elmojo said:

cap006.jpg

This appears correct, is it still identical? Problem is, I don't use this app, so I'm not familiar with all the possible locations for paths in the config. Your nested paths would be what would happen if the app appended data to the end of the config path instead of referencing it literally as /data

Link to comment
17 minutes ago, Elmojo said:

I don't think I did. Please take a look at the screenshots I posted, if you have a moment. Do they look correct to you?  This whole thing is just baffling, and super frustrating.  It was all working so well, and now it's a hot mess.

Does the format of the file names match files that are being downloaded or is it a match for the file renaming being used by Radarr or Sonarr?

Link to comment
24 minutes ago, JonathanM said:

This appears correct, is it still identical?

Yep, looks just like that.

Now, my SabNZB has stopped working.  It downloads just fine, then Sonarr says that no file is found in the folder where it's looking to import.

14 minutes ago, wgstarks said:

Does the format of the file names match files that are being downloaded or is it a match for the file renaming being used by Radarr or Sonarr?

I'm not really sure what you're asking, sorry.   It seems like the issue is that the system doesn't know where to look for the downloaded files, more than the actual file names being the problem.

Link to comment

So this may mean something...

I notice that Radarr is giving me this error: "You are using docker; download client SABnzbd places downloads in /downloads but this directory does not appear to exist inside the container. Review your remote path mappings and container volume settings."

OKaaay...  I thought we weren't supposed to be using remote path mappings, but alright.

So I finally found the settings page in the UI of SabNZB, and sure enough, it's pointing to /downloads and /downloads/incomplete.   However, these are container folders.  As expected, I don't have any option to select anything outside the container.  There is another "downloads" option if I browse, which is /config/downloads.  If I select that one, the page looks like this...

However, neither of those selections makes the error go away in Radarr, and neither gives access to the actual folder where I want all these files to go, which is mnt/user/downloads.  *facepalm*

Since lots of folks use what I have to assume is a very similar setup to this, surely there's a video for this, right?

cap014.jpg

Link to comment
8 minutes ago, Gog said:

I just did an image update and I started to get: AUTH: Received control message: AUTH_FAILED

Read back a page or two. There was talk about a VPN keysize thing that needs to be edited in the config file.  Scroll back a bit, you'll see it.  That sounds like maybe your problem as well.

Link to comment
20 minutes ago, JonathanM said:

There's your problem. It's got to be /data in both containers. The mapping from /mnt/user/... to /data has to be identical in both containers.

Ok, so I fixed that, I think, but that didn't remove the error msg from Radarr, and Sonarr is still refusing to import any files downloaded. It still just says "no files found are eligible for import in /data/downloads/..."   If I try to manual import, I get "No video files were found in the selected folder".  *sigh*

Link to comment

Holy crap, I think I have it fixed!!!
I found a guide by TRaSH that explained it with pictures in a way my dumb self could understand. :)

I had to add back in the remote path mapping, and change it a bit from what I had previously, to match the new "/data/" schema were using now, but once I did that it started importing the files and clearing out the backlog!

Oh man, what an ordeal.  I hope I have enough notes and screenshots now that if this happens again, I can fix it myself without having to hassle you kind folks.  Thanks so much for you all your help.

If something else breaks, I'm sure I'll be back. :D

Link to comment
1 minute ago, JonathanM said:

If the container mapping is done properly, you don't need remote path mapping.

I keep hearing that, but I've never seen a clear explanation of what "proper" mapping looks like, or how to accomplish it, so I'm stuck with what works. ;)

I'm just glad to be done with this for now.  It's been a rather painful couple days, and the wife was about fed up with her shows not being available when she expected them. lol

Link to comment
17 hours ago, Elmojo said:

Yeah, my qBT config file looks like the example you posted.
I'm not sure that it's Radarr causing it, since I'm pretty sure I saw the funky nested folders popping up before I edited the paths in Radarr.  I might be wrong about that, but I don't think so.  Also, I believe I see the folders where Radarr is dropping stuff, and it's not those, it's elsewhere.

Here are my configs, I always have issues when configuring new servers with unraidOS, because I keep forgetting paths and etc

RADARR/SONARR
image.thumb.png.3413fc00e30eb195d12bec0def2f0f77.png

qBITTORENTvpn:
image.thumb.png.4a0bf2d5abfe1a635e5a3bda6ac5694a.png

 

image.png.716ec9b27d415395014b1685ab0d4633.png

 

These are my configs, works like a charm, no issues with downloads, torrents errored (even with chmod -R 777) or issues where the docker radarr/sonarr doesnt have access to the configured (downloads) folder.

 

cheers

 

Edited by luisribeiru
  • Like 1
Link to comment
41 minutes ago, luisribeiru said:

Here are my configs

Dude, your VERY FIRST post is to help me? Thanks!! :)

I'll make note of your method, in case mine fails again.

I gotta say, it looks sketchy as all getout, having your temp and completed downloads sharing a path like that, but if it works... lol

  • Like 1
Link to comment

Hi All,

 

I have a QNAP TS-451+ running QTS 5.0.1.2277.

 

I believe since doing this update, I am no longer able to use this docker container.

I use Watchtower so I should be using the latest version of the docker image. 

 

Error as in image:

iptables kernel module 'ip_tables' not available, exiting script...

 

Does anyone know of any solutions?

 

Thanks

image.png

Link to comment
9 hours ago, stuntguy3000 said:

Hi All,

 

I have a QNAP TS-451+ running QTS 5.0.1.2277.

 

I believe since doing this update, I am no longer able to use this docker container.

I use Watchtower so I should be using the latest version of the docker image. 

 

Error as in image:

iptables kernel module 'ip_tables' not available, exiting script...

 

Does anyone know of any solutions?

 

Thanks

image.png

Same problem here with a QNAP 453be, Firmware version QTS 5.0.1.2277 Build 20230112 & Container-Station.

Link to comment
9 hours ago, stuntguy3000 said:

Does anyone know of any solutions?

 

2 minutes ago, jom said:

Same problem here with a QNAP 453be,

for now roll back to the previous image, tag name is '2.1.1-3-02' then once its running to help me debug this please run the following commands inside of the container and paste the output here:-

 

iptables -S

and

lsmod

 

Link to comment
33 minutes ago, binhex said:

 

for now roll back to the previous image, tag name is '2.1.1-3-02' then once its running to help me debug this please run the following commands inside of the container and paste the output here:-

 

iptables -S

and

lsmod

 

Thank you! i have already switched back to binhex/arch-qbittorrentvpn:4.5.1-1-01

Perhaps this also helps:
 

Quote

sh-5.1# iptables -S
-P INPUT DROP
-P FORWARD DROP
-P OUTPUT DROP
-A INPUT -s 172.***.***.0/22 -d 172.***.***.0/22 -j ACCEPT
-A INPUT -s 213.***.***.***/32 -i eth0 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 8112 -j ACCEPT
-A INPUT -i eth0 -p udp -m udp --dport 8112 -j ACCEPT
-A INPUT -s 192.168.178.0/24 -d 172.***.***.0/22 -i eth0 -p tcp -m tcp --dport 8118 -j ACCEPT
-A INPUT -s 192.168.178.0/24 -d 172.***.***.0/22 -i eth0 -p tcp -m tcp --sport 39348 -j ACCEPT
-A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -i tun0 -j ACCEPT
-A OUTPUT -s 172.***.***.0/22 -d 172.***.***.0/22 -j ACCEPT
-A OUTPUT -d 213.***.***.***/32 -o eth0 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 8112 -j ACCEPT
-A OUTPUT -o eth0 -p udp -m udp --sport 8112 -j ACCEPT
-A OUTPUT -s 172.***.***.0/22 -d 192.168.178.0/24 -o eth0 -p tcp -m tcp --sport 8118 -j ACCEPT
-A OUTPUT -s 172.***.***.0/22 -d 192.168.178.0/24 -o eth0 -p tcp -m tcp --dport 39348 -j ACCEPT
-A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT
-A OUTPUT -o lo -j ACCEPT
-A OUTPUT -o tun0 -j ACCEPT
sh-5.1# lsmod
Module                  Size  Used by
xt_ipvs                16384  0
ip_vs_rr               16384  0
ip_vs_ftp              16384  0
ip_vs                 139264  15 ip_vs_rr,xt_ipvs,ip_vs_ftp
xt_nat                 16384  53
xt_addrtype            16384  10
kvm_intel             225280  0
kvm                   516096  1 kvm_intel
vhost_net              24576  0
tap                    24576  1 vhost_net
vhost                  40960  1 vhost_net
vhost_iotlb            16384  1 vhost
tun                    49152  5 vhost_net
usdm_drv               94208  0
intel_qat             286720  1 usdm_drv
uio                    20480  1 intel_qat
iscsi_tcp              20480  0
libiscsi_tcp           28672  1 iscsi_tcp
libiscsi               53248  2 libiscsi_tcp,iscsi_tcp
scsi_transport_iscsi    90112  4 libiscsi_tcp,iscsi_tcp,libiscsi
fbdisk                 36864  0
xt_conntrack           16384  13
cfg80211              397312  0
dummy                  16384  0
br_netfilter           24576  0
bridge                172032  1 br_netfilter
stp                    16384  1 bridge
bonding               163840  0
xt_connmark            16384  2
xt_TCPMSS              16384  0
xt_LOG                 16384  0
xt_set                 16384  12
ip_set_hash_netiface    45056  1
ip_set_hash_net        45056  11
ip_set                 40960  3 ip_set_hash_netiface,xt_set,ip_set_hash_net
xt_MASQUERADE          16384  32
xt_REDIRECT            16384  0
iptable_nat            16384  11
nf_nat                 36864  5 xt_nat,iptable_nat,xt_MASQUERADE,xt_REDIRECT,ip_vs_ftp
xt_policy              16384  0
xt_mark                16384  16
8021q                  28672  0
ipv6                  475136  278 bridge,br_netfilter
uvcvideo              106496  0
videobuf2_v4l2         24576  1 uvcvideo
videobuf2_vmalloc      16384  1 uvcvideo
videobuf2_memops       16384  1 videobuf2_vmalloc
videobuf2_common       45056  2 videobuf2_v4l2,uvcvideo
snd_usb_caiaq          49152  0
snd_usb_audio         262144  0
snd_usbmidi_lib        28672  1 snd_usb_audio
snd_seq_midi           16384  0
snd_rawmidi            32768  3 snd_seq_midi,snd_usbmidi_lib,snd_usb_caiaq
fnotify                61440  1
nfsd                 1204224  1 fnotify
udf                   114688  0
isofs                  45056  0
iTCO_wdt               16384  1
vfio_pci               61440  0
irqbypass              16384  2 vfio_pci,kvm
vfio_virqfd            16384  1 vfio_pci
vfio                   28672  1 vfio_pci
x53S_pins              16384  0
exfat                  77824  0
ufsd                  794624  0
jnl                    32768  1 ufsd
cdc_acm                32768  0
pl2303                 24576  0
usbserial              40960  1 pl2303
qm2_i2c                16384  4
intel_ips              24576  0
drbd                  413696  4
lru_cache              16384  1 drbd
flashcache            167936  0
dm_tier_hro_algo       24576  1
dm_thin_pool          229376  10 dm_tier_hro_algo
dm_bio_prison          24576  1 dm_thin_pool
dm_persistent_data     81920  1 dm_thin_pool
hal_netlink            16384  0
r8152                 221184  0
usbnet                 36864  0
mii                    16384  1 usbnet
igb                   225280  0
e1000e                245760  0
mv14xx                651264  0
mpt3sas               368640  0
scsi_transport_sas     40960  1 mpt3sas
raid_class             16384  1 mpt3sas
qla2xxx               856064  0
scsi_transport_fc      57344  1 qla2xxx
k10temp                16384  0
coretemp               16384  0
uas                    28672  0
usb_storage            69632  1 uas
xhci_pci               16384  0
xhci_hcd              184320  1 xhci_pci
usblp                  24576  0
uhci_hcd               45056  0
ehci_pci               16384  0
ehci_hcd               81920  1 ehci_pci
sh-5.1#

 

Edited by jom
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.