hawors Posted December 15, 2018 Share Posted December 15, 2018 Hi All, I've been using Unraid for about 2 years with a Lian Li small form factor case and have been incredibly happy. Recently I've been wondering if it would be possible to run Unraid on a Hades Canyon NUC connected to a Thunderbolt 3 Storage and eGPU enclosure: - Hades Canyon NUC (https://www.intel.com.au/content/www/au/en/products/boards-kits/nuc/kits/nuc8i7hnk.html) - OWC Thunderbay 6 (https://www.owcdigital.com/products/thunderbay-6) - OWC Mercury Helios FX (https://www.owcdigital.com/products/mercury-helios-fx) Does anyone know if such a setup would work (either by plug n play or by manual tweaks)? I haven't been able to find much regarding Thunderbolt 3 support within Unraid on the forums and I was just curious if anyone has tried something similar and could provide advice? Any advice, information or feedback would be greatly appreciated. Cheers. Quote Link to comment
dee31797 Posted January 21, 2019 Share Posted January 21, 2019 While not very practical, Unraid does work with intel nuc's and it's plug and play, as well as the thunderbolt 3 port. I haven't tested gpu passthrough with the nuc. Quote Link to comment
-jim Posted February 22, 2021 Share Posted February 22, 2021 Any updates on this? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.