December 18, 20187 yr I rebooted my server this afternoon and a few drives are no longer seen. I also see many errors in the SYS log about Bad DLLP. I've turned the server off in the mean time until I know what to do moving forward. tower-diagnostics-20181218-1722.zip
December 18, 20187 yr Community Expert LSI HBA failed to initialize, the PCI errors can be related and might be fixed by a bios update and/or swapping the HBA to a different PCIe slot.
December 19, 20187 yr Author I'm on the latest bios for my Asrock Taichi x399. I tried moving the PCI devices around but I keep getting these errors.
December 19, 20187 yr Community Expert Try adding pci=nommconfto your syslinux.cfg after append initrd=/bzroot, so it would look like: append initrd=/bzroot pci=nommconfto But this could have some drawbacks, ideally a bios update (or a different board) is needed to fix it.
December 19, 20187 yr Author Adding pci=nommconfto to syslinux.cfg did not work. Do you think this is specific to my current board or all versions of the Taichi x399?
December 19, 20187 yr Community Expert Likely it will be the same for all if using the same bios version.
Archived
This topic is now archived and is closed to further replies.