busthead Posted January 3, 2019 Share Posted January 3, 2019 Hello, I'm running unRAID v6.6.6 on a HP Compaq 6000 Pro Microtower. I've installed "Community Applications" Plugin and Zoneminder Docker. I appear to be experiencing a performance issue that I don't know how to debug. Any help would be much appreciated. You can see below, I've issued a rsync command to copy from 192.168.0.232 to unRAID and the file transfer speed has slowed to a crawl. I verified that the 192.168.0.232 server is performing well. root@Tower:/# rsync --progress -rltuv [email protected]:/mnt/Vol1/ /mnt/user/unRAID/ [email protected]'s password: receiving incremental file list ./ .windows 0 100% 0.00kB/s 0:00:00 (xfr#1, ir-chk=7016/7018) Backups/ Backups/.DS_Store 8,196 100% 7.82MB/s 0:00:00 (xfr#2, ir-chk=7011/7018) Backups/._.DS_Store 4,096 100% 3.91MB/s 0:00:00 (xfr#3, ir-chk=7010/7018) Backups/Amy (Mac Mini)/ Backups/Amy (Mac Mini)/.DS_Store 6,148 100% 5.86MB/s 0:00:00 (xfr#4, ir-chk=6991/7018) Backups/Amy (Mac Mini)/._.DS_Store 4,096 100% 1.95MB/s 0:00:00 (xfr#5, ir-chk=6990/7018) Backups/Amy (Mac Mini)/._Macintosh HD.dmg 4,096 100% 1.30MB/s 0:00:00 (xfr#6, ir-chk=6989/7018) Backups/Amy (Mac Mini)/Macintosh HD.dmg 20,678,180,864 62% 19.85kB/s 176:00:06 20,760,494,080 62% 19.85kB/s 174:50:47 20,763,115,520 62% 7.44kB/s 466:37:33 20,763,377,664 62% 0.62kB/s 5578:17:22 tower-diagnostics-20190102-2235.zip Quote Link to comment
JorgeB Posted January 3, 2019 Share Posted January 3, 2019 There was a xfs related call trace, reboot, check filesystem on disk1 and try again. Quote Link to comment
busthead Posted January 4, 2019 Author Share Posted January 4, 2019 Thank you for the guidance. I wasn't able to reboot or shutdown via the GUI so I had to powerdown from the CLI. Disk 1 filesystem check output is attached. I then tried the rsync again with similar results: Backups/Amy (Mac Mini)/Macintosh HD.dmg 12,365,856,768 37% 19.85kB/s 292:19:07 12,387,876,864 37% 19.85kB/s 292:00:17 12,395,216,896 37% 19.85kB/s 291:53:47 Disk1_Filesystem_Check.txt tower-diagnostics-20190104-1244.zip Quote Link to comment
busthead Posted January 4, 2019 Author Share Posted January 4, 2019 Looks like I have a bad stick of RAM. Will try the rsync again and report back. Quote Link to comment
busthead Posted January 9, 2019 Author Share Posted January 9, 2019 Removing the bad RAM fixed the issue. That said, rsync is topping out at approx. 21 MB/s. When I manually copy (SMB) a large file from the same source host to a different destination host, my laptop, I get 120 MB/s. All three systems are connected to the same switch. SMB get from the same source to unRAID averages approx. 65-70 MB/s Why is rsync three times as slow as SMB with the same source and destination and almost six times slower than SMB from the same source to a different destination on the same switch? Thx Quote Link to comment
trurl Posted January 9, 2019 Share Posted January 9, 2019 1 hour ago, busthead said: SMB get from the same source to unRAID averages approx. 65-70 MB/s This seems normal. Maybe better than normal. Are you using Turbo Write? Writes to the parity array are slower than single disk write speed due to parity updates. Quote Link to comment
JorgeB Posted January 9, 2019 Share Posted January 9, 2019 2 hours ago, busthead said: That said, rsync is topping out at approx. 21 MB/s. Rsync command line you're using? Quote Link to comment
busthead Posted January 10, 2019 Author Share Posted January 10, 2019 5 hours ago, johnnie.black said: Rsync command line you're using? rsync --progress -rltuv [email protected]:/mnt/Vol1/ /mnt/user/unRAID/ Quote Link to comment
JorgeB Posted January 10, 2019 Share Posted January 10, 2019 That should be fine, just checking you weren't using the compression flag, using a different cipher can give a little more performance with rsync but that doesn't explain 20MB/s, so something else is going on, assuming the CPUs in use are powerful enough, i.e., they are not a couple of single core Atom CPUs. Quote Link to comment
busthead Posted January 10, 2019 Author Share Posted January 10, 2019 8 hours ago, johnnie.black said: assuming the CPUs in use are powerful enough Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06GHz Neither CPU nor RAM appear to be the issue. Topping out at 23 MB/s. Diagnostics attached. tower-diagnostics-20190110-1001.zip Quote Link to comment
JorgeB Posted January 10, 2019 Share Posted January 10, 2019 Use iperf to test your LAN bandwidth. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.