January 9, 20197 yr Hi All I have a Gen 8 HP MicroServer with 4 drives for storage and 1 for cache. My cache drive is starting to fail, it boots in about 1 out of 50 attempts. I've added a second a SSD to mirror the cache. My issue is Unraid is reporting I have 7 drives and won't start. The HP unit has a small flash drive built in which I don't use however I cannot see anywhere to uninstall/remove it from Unraid or from HPE/ILO. Is there anyway I can disable it so Unraid will start and allow me to clone my cache. Don't want to reboot my system if I can help it. Thanks Paul Edited January 9, 20197 yr by IrishBiker speeling
January 9, 20197 yr Author UPDATE: I bit the bullet and bought the upgrade licence which leads me to my next question. Adding the second cache drive and added it to a pool. Can I set it up to either clone or mirror the first one?
January 9, 20197 yr 12 minutes ago, IrishBiker said: Can I set it up to either clone or mirror the first one? look under the FAQ in this forum I believe instructions are there
January 9, 20197 yr Community Expert 24 minutes ago, IrishBiker said: UPDATE: I bit the bullet and bought the upgrade licence which leads me to my next question. Adding the second cache drive and added it to a pool. Can I set it up to either clone or mirror the first one? Mirror is the default for the pool. Other btrfs raid configurations are possible.
January 9, 20197 yr Author 13 minutes ago, trurl said: Mirror is the default for the pool. Other btrfs raid configurations are possible. perfect thanks.
Archived
This topic is now archived and is closed to further replies.