zonik Posted January 14, 2019 Share Posted January 14, 2019 first post so lets hope i get this right i recently set up unraid and for about a week everything was going great and now its slow and unresponsive and i have to reboot once a day to make it usable for about 15 mins and for the life of me i cant figure this out specs are dual xeon E-5 2660 v2, 16gb ecc ram (upgrade is coming) 3x8tb and 5x4tb drives 256gb cache drive samwise-diagnostics-20190114-2003.zip Quote Link to comment
trurl Posted January 14, 2019 Share Posted January 14, 2019 Parity and disk1 have dropped offline. Check all connections power and SATA on all disks and post another diagnostic. Quote Link to comment
zonik Posted January 14, 2019 Author Share Posted January 14, 2019 ok i wiggled all the sata cables and power cables i will keep you posted Quote Link to comment
JorgeB Posted January 14, 2019 Share Posted January 14, 2019 You're using a 2 port controller with two SATA multipliers, those kind of timeout issues are normal with those, I recommend you get an LSI HBA instead or you'll have constant issues. Quote Link to comment
zonik Posted January 15, 2019 Author Share Posted January 15, 2019 so you are saying i need a sas controller, i did wiggle all the sata data cables and power cables seemed to work for a while and came back to screeching crawl Quote Link to comment
JorgeB Posted January 15, 2019 Share Posted January 15, 2019 You need a decent HBA, port multipliers will generally be nothing but trouble, get any LSI with a SAS2008/2308/3008 chipset in IT mode, e.g., 9201-8i, 9211-8i, 9207-8i, 9300-8i, etc and clones, like the Dell H200/H310 and IBM M1015, these latter ones need to be crossflashed. Quote Link to comment
zonik Posted January 15, 2019 Author Share Posted January 15, 2019 ok thanks for the info i just dont understand why this is a problem now have been running this setup for about a year without any issues Quote Link to comment
JorgeB Posted January 15, 2019 Share Posted January 15, 2019 17 minutes ago, zonik said: ok thanks for the info i just dont understand why this is a problem now have been running this setup for about a year without any issues I'm not saying the controller is the source of all your problems, but if you keep getting timeout errors similar to those on the diags you posted, the server will be unresponsive during those, and port multipliers are known to cause that. Quote Link to comment
zonik Posted January 15, 2019 Author Share Posted January 15, 2019 i wont argue with an expert so i have ordered a sas controller per your specifications and cables lets hope that fixes it Quote Link to comment
zonik Posted March 10, 2019 Author Share Posted March 10, 2019 i put the lsi 9211-8i in and it worked liek charm its completely different Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.