darrenyorston Posted January 22, 2019 Share Posted January 22, 2019 In setting up my new server I was intending to utilise XFS encrypted as my default file system. After successfully provisioning a certificate the UI became incredibly slow. It took 30sec for a page to become available. Ive turned off SSL in Management Access area and the UI is once again responsive. What's going on here? Quote Link to comment
Squid Posted January 23, 2019 Share Posted January 23, 2019 Diagnostics might show the reason. Re-enable and bounce around the UI then post them up. Quote Link to comment
darrenyorston Posted January 23, 2019 Author Share Posted January 23, 2019 Done. kneeling-goat-diagnostics-20190122-2137.zip Quote Link to comment
oliver Posted January 29, 2019 Share Posted January 29, 2019 Same issue here. Am a relatively new user to unraid, figured this is how it always is. But upon installing a second instance of unraid, I notice the drastic slowdown as soon as I enabled SSL. Quote Link to comment
dfrelow Posted January 31, 2019 Share Posted January 31, 2019 I also am having this issue. loading pages like Plugins and VMs takes in excess of 20 seconds. ncc-1701-diagnostics-20190131-0833.zip Quote Link to comment
itimpi Posted January 31, 2019 Share Posted January 31, 2019 (edited) 31 minutes ago, dfrelow said: I also am having this issue. loading pages like Plugins and VMs takes in excess of 20 seconds. ncc-1701-diagnostics-20190131-0833.zip Those two pages have always taken quite a long time to load. I think a lot goes on behind the scenes when loading those pages. Does not mean I would not like them to load faster if a way can be found to achieve that Edited January 31, 2019 by itimpi Quote Link to comment
dfrelow Posted January 31, 2019 Share Posted January 31, 2019 (edited) Never this long, and this only started after turning on SSL. Even the dashboard takes that long to fully populate. its clearly an issue with lets encrypt certs in 6.6.6 this was not an issue with self-signed certs in 6.6.4 EDIT: Here is a video. Edited January 31, 2019 by dfrelow Added video to prevent further dismissal of my claims Quote Link to comment
Knoxie89 Posted January 31, 2019 Share Posted January 31, 2019 That shouldn't load that slowly Quote Link to comment
limetech Posted January 31, 2019 Share Posted January 31, 2019 We've never seen this problem, load times are always indistinguishable whether using http or https. Maybe your server is having connectivity issues verifying the certificate with Lets Encrypt? eg, DNS setup wrong. Maybe use 'inspect' in your browser and then bring up Network activity to see what's happening. Quote Link to comment
dfrelow Posted January 31, 2019 Share Posted January 31, 2019 (edited) I'm not exactly sure what to look for in the network inspector in chrome. but my server has already received its cert key pair from let's encrypt. It shouldn't be reaching out to let's encrypt for every page request (from my understanding of the SSL model). I will look into the DNS setup. I think the mapping of <Crazy_String>.unraid.net to x.x.0.117 might be causing some errors. But seems to me like maybe a PHP issue. where CSS and some of the elements are loading but the content is not populating the page. Could unraid be linking to resources using its local IP which then needs to be redirected to <Crazy_String>.unraid.net causing this delay? EDIT: Incognito mode works flawlessly. now I'm very confused. Edited January 31, 2019 by dfrelow Quote Link to comment
limetech Posted January 31, 2019 Share Posted January 31, 2019 1 hour ago, dfrelow said: I'm not exactly sure what to look for in the network inspector in chrome. but my server has already received its cert key pair from let's encrypt. It shouldn't be reaching out to let's encrypt for every page request (from my understanding of the SSL model). I will look into the DNS setup. I think the mapping of <Crazy_String>.unraid.net to x.x.0.117 might be causing some errors. But seems to me like maybe a PHP issue. where CSS and some of the elements are loading but the content is not populating the page. Could unraid be linking to resources using its local IP which then needs to be redirected to <Crazy_String>.unraid.net causing this delay? EDIT: Incognito mode works flawlessly. now I'm very confused. Try a safe-mode boot, could be a plugin trying to reach some site. Edit: should say: we enable 'stapling' with the cert that will limit how often a cert is validated, but they do need to be validated from time to time. Quote Link to comment
bonienl Posted January 31, 2019 Share Posted January 31, 2019 1 hour ago, dfrelow said: Incognito mode works flawlessly. now I'm very confused. Clear your browser's cache. Quote Link to comment
m0t0k0 Posted January 31, 2019 Share Posted January 31, 2019 I have the same problem on Chrome. Works fine in incognito mode and in Firefox. Cleared Cache but it did not help Quote Link to comment
dfrelow Posted January 31, 2019 Share Posted January 31, 2019 7 minutes ago, bonienl said: Clear your browser's cache. Yea that was the second thing It might be a plugin. darrenyorston, oliver have you had any success? On 1/22/2019 at 5:13 PM, darrenyorston said: On 1/29/2019 at 12:15 AM, oliver said: Quote Link to comment
dfrelow Posted January 31, 2019 Share Posted January 31, 2019 Just now, m0t0k0 said: I have the same problem on Chrome. Works fine in incognito mode and in Firefox. Cleared Cache but it did not help very interesting... Quote Link to comment
oliver Posted February 1, 2019 Share Posted February 1, 2019 At this point i've just accepted it as a flaw in the product. Luckily I don't go into the UI much. Quote Link to comment
dfrelow Posted February 1, 2019 Share Posted February 1, 2019 I've actually narrowed it down to the "Grammarly spell check" extension. Infortunetly me speell no good. So ive resigned my self to just logging in with incognito mode, its not the end of the world. Good luck to others effected by this. Quote Link to comment
limetech Posted February 1, 2019 Share Posted February 1, 2019 1 hour ago, oliver said: At this point i've just accepted it as a flaw in the product. Luckily I don't go into the UI much. Which product? Not Unraid. Quote Link to comment
limetech Posted February 1, 2019 Share Posted February 1, 2019 2 hours ago, dfrelow said: I've actually narrowed it down to the "Grammarly spell check" extension. Infortunetly me speell no good. So ive resigned my self to just logging in with incognito mode, its not the end of the world. Good luck to others effected by this. Why not use a different browser for accessing the webGUI? Quote Link to comment
dfrelow Posted February 1, 2019 Share Posted February 1, 2019 Chrome is usually open, Ctrl+Shift+N and then click the bookmark is easy enough for me 😀. Arguably having to log in every time I connect to the Web UI is more secure. its not a major inconvenience. Quote Link to comment
darrenyorston Posted February 1, 2019 Author Share Posted February 1, 2019 4 hours ago, dfrelow said: I've actually narrowed it down to the "Grammarly spell check" extension. Infortunetly me speell no good. So ive resigned my self to just logging in with incognito mode, its not the end of the world. Good luck to others effected by this. I have grammaely running as well. Quote Link to comment
darrenyorston Posted February 1, 2019 Author Share Posted February 1, 2019 2 hours ago, limetech said: Why not use a different browser for accessing the webGUI? I'll try a different browser and see what happens. Quote Link to comment
m0t0k0 Posted February 1, 2019 Share Posted February 1, 2019 Yes, Grammarly is the problem if you right click the icon and change the setting so it only checks a site when you click the icon it fixes the problem. I tried just excluding my UNRAID UI by following this guide but it still won't play ball https://support.grammarly.com/hc/en-us/articles/115000091612-Disable-the-Grammarly-extension-on-one-or-more-websites Quote Link to comment
darrenyorston Posted February 2, 2019 Author Share Posted February 2, 2019 I disabled Grammarly in Chrome and SSL now works fine. Oddly when I tried Microsoft Edge it will not even attempt to open my servers page. No error, nothing. Thankfully I dont utilise Edge. Quote Link to comment
limetech Posted February 2, 2019 Share Posted February 2, 2019 4 hours ago, darrenyorston said: I disabled Grammarly in Chrome and SSL now works fine. Oddly when I tried Microsoft Edge it will not even attempt to open my servers page. No error, nothing. Thankfully I dont utilise Edge. FWIW I use Edge all the time Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.