January 23, 20197 yr Anyone have any experience with the PowerWalker VI 3000 RLE (It has USB support) But I haven't found any indication to if its supported by Unraid? https://powerwalker.com/?item=10121101 Best regards Casperse
January 23, 20197 yr I think I read somewhere unRAID is using NUT to get info from the UPS. About a month ago I got a smaller version of this UPS, a Bluewalker PowerWalker VI 750, and NUT isn't getting the correct values back from it. I have been in contact with one of the people working on NUT, and he said the data returned was somehow malformed. I have tested my VI 750 with the software Bluewalker provided with it, and with that it works fine.
January 23, 20197 yr 42 minutes ago, mikeydk said: I think I read somewhere unRAID is using NUT to get info from the UPS No, stock unraid uses apcupsd. NUT is available as an optional plugin.
January 23, 20197 yr 35 minutes ago, jonathanm said: No, stock unraid uses apcupsd. NUT is available as an optional plugin. ah... then I have no idea
January 24, 20197 yr Author Ok sounds like its better to stick with an old APC Smart-UPS 2200VA from Ebay
January 24, 20197 yr 3 hours ago, casperse said: old APC Smart-UPS 2200VA are this unit not very loud?
January 24, 20197 yr Author I think that's only when the power is cut (Which shouldn't be very often) or am I wrong anyone who owns one of these UPS? Found one that have both USB and the Netcard (Dell version model) so I should be able to use it with two servers! Using Synology as the master and then this plugin on my Unraid server:
January 25, 20197 yr I just tried connecting a computer with unraid to my Bluewalker PowerWalker VI 750, and the returned data is wrong. Same values are returned by NUT, only the shipped with the UPS is returning the correct values. (second screenshot is not taking around one month before the unraid screenshot) Edited January 25, 20197 yr by mikeydk
Archived
This topic is now archived and is closed to further replies.