Switching to 6.7.0-rc1 "config/vfio-pci.cfg"

[TheBlueKingLP]

I am switching to the new 6.7.0-rc1 "config/vfio-pci.cfg" but it didn't work. The usb controller I am trying to passthrough didn't show in other pci devices in the vm manager. Here is the content of the vfio-pci.cfg file:

BIND=07:00.0 08:00.0

[saarg]

What is the full path to the the file? 

[TheBlueKingLP]

On 1/24/2019 at 4:06 PM, saarg said:

What is the full path to the the file? 

On the flash boot drive inside the config folder (/boot/config/vfio-pci.cfg)

Edited May 26, 2019 by TheBlueKingLP

[saarg]

That seems like the correct path. Was wondering since you didn't type the full path in the first post. 

Is the cards bound to vfio if you issue lspci -v? 

[TheBlueKingLP]

17 hours ago, saarg said:

That seems like the correct path. Was wondering since you didn't type the full path in the first post. 

Is the cards bound to vfio if you issue lspci -v? 

Here is the controller that I wanted to passthrough in the lspci -v output

 

07:00.0 USB controller: ASMedia Technology Inc. ASM1142 USB 3.1 Host Controller (prog-if 30 [XHCI])
    Subsystem: ASUSTeK Computer Inc. ASM1142 USB 3.1 Host Controller
    Flags: bus master, fast devsel, latency 0, IRQ 18, NUMA node 0
    Memory at fb800000 (64-bit, non-prefetchable) [size=32K]
    Capabilities: [50] MSI: Enable- Count=1/8 Maskable- 64bit+
    Capabilities: [68] MSI-X: Enable+ Count=8 Masked-
    Capabilities: [78] Power Management version 3
    Capabilities: [80] Express Endpoint, MSI 00
    Capabilities: [100] Virtual Channel
    Capabilities: [200] Advanced Error Reporting
    Capabilities: [280] Secondary PCI Express <?>
    Capabilities: [300] Latency Tolerance Reporting
    Kernel driver in use: xhci_hcd

08:00.0 USB controller: ASMedia Technology Inc. ASM1142 USB 3.1 Host Controller (prog-if 30 [XHCI])
    Subsystem: ASUSTeK Computer Inc. ASM1142 USB 3.1 Host Controller
    Flags: bus master, fast devsel, latency 0, IRQ 16, NUMA node 0
    Memory at fb700000 (64-bit, non-prefetchable) [size=32K]
    Capabilities: [50] MSI: Enable- Count=1/8 Maskable- 64bit+
    Capabilities: [68] MSI-X: Enable+ Count=8 Masked-
    Capabilities: [78] Power Management version 3
    Capabilities: [80] Express Endpoint, MSI 00
    Capabilities: [100] Virtual Channel
    Capabilities: [200] Advanced Error Reporting
    Capabilities: [280] Secondary PCI Express <?>
    Capabilities: [300] Latency Tolerance Reporting
    Kernel driver in use: xhci_hcd

 

[saarg]

There is something wrong with either the new method or something you do, but I don't see anything wrong with what you posted. I'll test it at home this weekend and see if I get the same result. 

[TheBlueKingLP]

There is something wrong with either the new method or something you do, but I don't see anything wrong with what you posted. I'll test it at home this weekend and see if I get the same result. 

Thank you for your help. At the mean time I will switch back to the old method. Please post here after you've done testing the new result.

[saarg]

18 hours ago, TheBlueKingLP said:

Thank you for your help. At the mean time I will switch back to the old method. Please post here after you've done testing the new result.

 

It works here with only one PC number, but adding one more and it breaks. I only tried on RC1, but there are no mention of it being fixed in the RC2 release notes.

[TheBlueKingLP]

1 hour ago, saarg said:

 

It works here with only one PC number, but adding one more and it breaks. I only tried on RC1, but there are no mention of it being fixed in the RC2 release notes.

Hmm, ok, maybe make a bug report then?

[saarg]

2 hours ago, TheBlueKingLP said:

Hmm, ok, maybe make a bug report then?

I already did it.

[limetech]

Please see reply: