goinsnoopin Posted January 25, 2019 Share Posted January 25, 2019 (edited) I have a Windows 10 vm that keeps going into pause mode randomly. Just did it while typing the first sentence of this post. I can click resume and sometimes its good for a while other times just minutes before pausing again. Libvirt log is showing errors. Any suggestions? Unraid 6.6.6 diagnostics attached. tower-diagnostics-20190124-2002.zip Edited January 29, 2019 by goinsnoopin Quote Link to comment
JonathanM Posted January 25, 2019 Share Posted January 25, 2019 Didn't look at diagnostics, but I'll be the drive holding the vdisk is out of space. Even if it shows free space available, it could need file system maintenance to allow that space to be used. Quote Link to comment
JorgeB Posted January 25, 2019 Share Posted January 25, 2019 (edited) Cache is 99% full, and after emptying some data run a balance since it's also fully allocated, though it might not be after some space is freed: https://lime-technology.com/forums/topic/62230-out-of-space-errors-on-cache-drive/?do=findComment&comment=610551 Edited January 25, 2019 by johnnie.black Quote Link to comment
goinsnoopin Posted January 29, 2019 Author Share Posted January 29, 2019 Thanks jonathanm and johnnie.black...cache disk space was my issue. Made some room and am all set! Dan Quote Link to comment
danielcook1996 Posted December 4, 2019 Share Posted December 4, 2019 (edited) I am having this issue too. However, I have my vdisk stored on its own drive (not the cache) and it has over 800GB free. Power settings within the VM are set to never sleep. I am also unable to resume the VM when it pauses, I must force stop and then restart the VM. Any thoughts? I am running the latest stable release, 6.7.2 Edited December 4, 2019 by danielcook1996 Quote Link to comment
JorgeB Posted December 4, 2019 Share Posted December 4, 2019 Please post the diagnostics Quote Link to comment
Ora Posted January 1, 2020 Share Posted January 1, 2020 On 2019/12/4 at PM2点03分, danielcook1996 said: 我也有这个问题。但是，我的虚拟磁盘存储在其自己的驱动器（而不是缓存）上，并且有超过800GB的可用空间。VM中的电源设置设置为永不休眠。暂停时，我也无法恢复虚拟机，必须强制停止然后重新启动虚拟机。有什么想法吗？我正在运行最新的稳定版本6.7.2 I have the same problem as you. Have you solved your problem? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.