HDD read Errors

[sphairon]

Hi Guys,

 

I have a problem with one of my drives. It is a new Drive from Western Digital. I tried to preclear this drive, but it fails in Pre-Read.

 

This is a piece of my Disk Log. Maybe some can tell me, if the drive is bad or something else.

Jan 31 18:17:04 PC-Server kernel: sd 11:0:0:0: [sde] tag#0 Sense Key : 0x4 [current]
Jan 31 18:17:04 PC-Server kernel: sd 11:0:0:0: [sde] tag#0 ASC=0x0 ASCQ=0x0
Jan 31 18:17:04 PC-Server kernel: sd 11:0:0:0: [sde] tag#0 CDB: opcode=0x28 28 00 02 39 0a 00 00 00 f0 00
Jan 31 18:17:04 PC-Server kernel: print_req_error: I/O error, dev sde, sector 37292544
Jan 31 18:17:25 PC-Server kernel: sd 11:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
Jan 31 18:17:25 PC-Server kernel: sd 11:0:0:0: [sde] tag#0 Sense Key : 0x4 [current]
Jan 31 18:17:25 PC-Server kernel: sd 11:0:0:0: [sde] tag#0 ASC=0x0 ASCQ=0x0
Jan 31 18:17:25 PC-Server kernel: sd 11:0:0:0: [sde] tag#0 CDB: opcode=0x28 28 00 02 39 0a 08 00 00 08 00
Jan 31 18:17:25 PC-Server kernel: print_req_error: I/O error, dev sde, sector 37292552
Jan 31 18:17:25 PC-Server kernel: Buffer I/O error on dev sde, logical block 4661569, async page read
Jan 31 18:17:45 PC-Server kernel: sd 11:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
Jan 31 18:17:45 PC-Server kernel: sd 11:0:0:0: [sde] tag#0 Sense Key : 0x4 [current]
Jan 31 18:17:45 PC-Server kernel: sd 11:0:0:0: [sde] tag#0 ASC=0x0 ASCQ=0x0
Jan 31 18:17:45 PC-Server kernel: sd 11:0:0:0: [sde] tag#0 CDB: opcode=0x28 28 00 02 39 0a 08 00 00 08 00
Jan 31 18:17:45 PC-Server kernel: print_req_error: I/O error, dev sde, sector 37292552
Jan 31 18:17:45 PC-Server kernel: Buffer I/O error on dev sde, logical block 4661569, async page read
Jan 31 18:31:33 PC-Server kernel: sd 11:0:0:0: [sde] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x08
Jan 31 18:31:33 PC-Server kernel: sd 11:0:0:0: [sde] tag#0 Sense Key : 0x4 [current]
Jan 31 18:31:33 PC-Server kernel: sd 11:0:0:0: [sde] tag#0 ASC=0x0 ASCQ=0x0

If read this error can appear, when have bad cable or a bad powersupply.

    I change the corresponding SATA cable.

    The Powersupply is from Corsair, I think this isn't the problem.

    I even changed the SATA Controller.

 

The only explanation I have is a bad drive, but this a new one. I got it directly from WD, as replacement for another bad drive I had.

 

Any suggestion would be nice.

[trurl]

Post SMART for the disk or just go to Tools - Diagnostics and attach the complete diagnostics zip file to your next post.

 

Have you done a memtest?

[sphairon]

I have three other Hard Drives in it working just fine. Today I added the 4. and got the errors.

 

pc-server-diagnostics-20190131-1937.zip

[Squid]

197 Current_Pending_Sector  -O--CK   200   200   000    -    2

Error 57 [8] occurred at disk power-on lifetime: 3 hours (0 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 08 00 00 02 39 0a 08 e0 00  Error: UNC 8 sectors at LBA = 0x02390a08 = 37292552

Serial Number:    WD-WCC4N3UV6PFX

Personally, I'd return the drive since its only 3 hours old.

[bman]

Agreed: return to sender.  Had lots of drives dead on arrival in my time.

 

Had a drive not quite failed but prone to future problems based upon SMART information and inconsistent data transfer rates after the first cycle was complete, so I cycled it through preclear for several days until it barfed so I had no hassle at the returns desk.

[sphairon]

Thanks guys for your suggestions

 

The drive is on the way back.