* Full disclosure - Nubie *

 

I swapped out a 3tb parity drive for a 6tb drive.  After starting the system back up, the rebuild is showing > 70 days.  Looking at the log I see the following constantly repeating:

Feb 4 11:55:08 PB kernel: ata5.00: irq_stat 0x0c400040, interface fatal error, connection status changed
Feb 4 11:55:08 PB kernel: ata5: SError: { HostInt PHYRdyChg 10B8B LinkSeq DevExch }
Feb 4 11:55:08 PB kernel: ata5.00: failed command: READ DMA EXT
Feb 4 11:55:08 PB kernel: ata5.00: cmd 25/00:40:00:bd:2e/00:05:00:00:00/e0 tag 7 dma 688128 in
Feb 4 11:55:08 PB kernel: res 50/00:00:ff:bc:2e/00:00:00:00:00/e0 Emask 0x50 (ATA bus error)
Feb 4 11:55:08 PB kernel: ata5.00: status: { DRDY }
Feb 4 11:55:08 PB kernel: ata5: hard resetting link
Feb 4 11:55:14 PB kernel: ata5: link is slow to respond, please be patient (ready=0)
Feb 4 11:55:18 PB kernel: ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Feb 4 11:55:18 PB kernel: ata5.00: NCQ Send/Recv Log not supported
Feb 4 11:55:18 PB kernel: ata5.00: NCQ Send/Recv Log not supported
Feb 4 11:55:18 PB kernel: ata5.00: configured for UDMA/33
Feb 4 11:55:18 PB kernel: ata5: EH complete
Feb 4 11:55:18 PB kernel: ata5.00: exception Emask 0x50 SAct 0x0 SErr 0x4890800 action 0xe frozen

 

So... I humbly ask for some advice as to what the above means a possible change/fix beside trying the 'laying on of hands'.

 

OrangeLoon

Please post the diagnostics: Tools -> Diagnostics

 

 

Can do...

 

prettyboy-diagnostics-20190204-1212.zip

Cancel the parity sync, check/replace both cables on disk6 and try again.

Re-seating them did not work - had to try. 

I will return after a couple of days. Ordering a herd of new ones.   thanks

I am back up and running and the Parity has been rebuilt - thanks for the help!