(SOLVED) SAS 9207-4I4E HOST BUS ADAPTER doesn't work?

[cracksilver]

Hi there

 

I installed a sas-9207-4i4e controller (got it for free with the server) in my HP MIcrosserver Gen8 and connected a 3TB hard disk. In ILO I can see the storage controller. In unRAID I don't see a hard disk under unassigned devices.

 

Do I have to install an additional driver or activate something else? Or can I check at least the drivers somehow?

 

Note: The HD works if it is connected directly to the SATA port of the server.

 

Added config zip screenshot from ILO

 

Thanks for any advice

gregor

 

tower-diagnostics-20190207-1552.zip

[JorgeB]

9207 are plug and play, please post the diagnostics, also make sure you're using the correct breakout cable, you need forward breakout, reverse breakout looks the same but won't work.

[cracksilver]

Thx for this fast reply.

diagnostic. Zip is attached in thr previous post.

What do you mean with the cables. I connected a "normal" cable. This one https://www.digitec.ch/de/s1/product/3ware-cbl-sff8087ocf-10m-sff-8087-zu-4-x-sata-1m-server-zubehoer-289454

Gesendet von meinem ONEPLUS A5000 mit Tapatalk

[cracksilver]

It's working! I hadn't plugged the plug all the way into the socket. the click was missing...

Sorry for running around for me and thank you very much.

[cracksilver]

how can I set the thread to "solved"'

[JorgeB]

 

[cracksilver]

1 minute ago, johnnie.black said:

 

thanks. I clicked around everywhere but was not holding