sephallen Posted June 6, 2020 Share Posted June 6, 2020 On 5/31/2020 at 10:45 AM, saarg said: It looks like the card might be faulty. To conclude, I sourced a P620 at a good price (also HP branded) and it works perfectly. It definitely would seem the P400 is indeed faulty. Thanks for all your help with debugging! Link to comment
saarg Posted June 6, 2020 Share Posted June 6, 2020 3 hours ago, sephallen said: To conclude, I sourced a P620 at a good price (also HP branded) and it works perfectly. It definitely would seem the P400 is indeed faulty. Thanks for all your help with debugging! Good to hear you got a working card. Link to comment
Pixor Posted June 8, 2020 Share Posted June 8, 2020 Hi Everyone, I've been wondering why my Quadro 600 card hasn't been detected for use in a Plex docker, and found the following in the system log:- Jun 7 19:21:50 Chewie kernel: nvidia-nvlink: Nvlink Core is being initialized, major device number 247 Jun 7 19:21:50 Chewie kernel: NVRM: The NVIDIA Quadro 600 GPU installed in this system is Jun 7 19:21:50 Chewie kernel: NVRM: supported through the NVIDIA 390.xx Legacy drivers. Please Jun 7 19:21:50 Chewie kernel: NVRM: visit http://www.nvidia.com/object/unix.html for more Jun 7 19:21:50 Chewie kernel: NVRM: information. The 440.59 NVIDIA driver will ignore Jun 7 19:21:50 Chewie kernel: NVRM: this GPU. Continuing probe... Are there any instructions on how I could get a Quadro 600 card working, or is it a dead end? Thanks. Link to comment
tjb_altf4 Posted June 8, 2020 Share Posted June 8, 2020 58 minutes ago, Pixor said: Are there any instructions on how I could get a Quadro 600 card working, or is it a dead end? Thanks. It's a dead end for hardware accelerated decode/encode for software like Plex, card is simply too old. Link to comment
Dimtar Posted June 8, 2020 Share Posted June 8, 2020 Hi all. Just put a new unraid box together, I bought a 2nd hand 1050 TI to go with it. I'm running 6.8.3 and have installed the Nvidia drivers/version twice now incase I did it wrong the first time. I'm getting this: Quote NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running. I've tried the two PCIE slots the box has but it doesn't seem to pick up the card at all? The fan on the side of the card is spinning so I know it at the very least has power. Not sure what to do next. Link to comment
saarg Posted June 8, 2020 Share Posted June 8, 2020 44 minutes ago, Dimtar said: Hi all. Just put a new unraid box together, I bought a 2nd hand 1050 TI to go with it. I'm running 6.8.3 and have installed the Nvidia drivers/version twice now incase I did it wrong the first time. I'm getting this: I've tried the two PCIE slots the box has but it doesn't seem to pick up the card at all? The fan on the side of the card is spinning so I know it at the very least has power. Not sure what to do next. Is it in the nvidia plugin page you see that message? You chose to download version 6.8.3 in the left pull down and rebooted? Post the output of lspci -k Link to comment
Dimtar Posted June 8, 2020 Share Posted June 8, 2020 5 minutes ago, saarg said: Is it in the nvidia plugin page you see that message? You chose to download version 6.8.3 in the left pull down and rebooted? Post the output of lspci -k Yes, yes and yes. 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core P rocessor Host Bridge/DRAM Registers (rev 07) Subsystem: Gigabyte Technology Co., Ltd Skylake Host Bridge/DRAM Registe rs Kernel driver in use: skl_uncore 00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06) DeviceName: Onboard IGD Subsystem: Gigabyte Technology Co., Ltd HD Graphics 530 Kernel driver in use: i915 Kernel modules: i915 00:14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31) Subsystem: Gigabyte Technology Co., Ltd Sunrise Point-H USB 3.0 xHCI Con troller Kernel driver in use: xhci_hcd 00:14.2 Signal processing controller: Intel Corporation 100 Series/C230 Series C hipset Family Thermal Subsystem (rev 31) Subsystem: Gigabyte Technology Co., Ltd Sunrise Point-H Thermal subsyste m 00:16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chips et Family MEI Controller #1 (rev 31) Subsystem: Gigabyte Technology Co., Ltd Sunrise Point-H CSME HECI 00:17.0 SATA controller: Intel Corporation Q170/Q150/B150/H170/H110/Z170/CM236 C hipset SATA Controller [AHCI Mode] (rev 31) Subsystem: Gigabyte Technology Co., Ltd Sunrise Point-H SATA controller [AHCI mode] Kernel driver in use: ahci Kernel modules: ahci 00:1b.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #17 (rev f1) Kernel driver in use: pcieport 00:1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #1 (rev f1) Kernel driver in use: pcieport 00:1c.3 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #4 (rev f1) Kernel driver in use: pcieport 00:1c.4 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #5 (rev f1) Kernel driver in use: pcieport 00:1d.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #9 (rev f1) Kernel driver in use: pcieport 00:1d.4 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #13 (rev f1) Kernel driver in use: pcieport 00:1f.0 ISA bridge: Intel Corporation Z170 Chipset LPC/eSPI Controller (rev 31) Subsystem: Gigabyte Technology Co., Ltd Sunrise Point-H LPC Controller 00:1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Fami ly Power Management Controller (rev 31) Subsystem: Gigabyte Technology Co., Ltd Sunrise Point-H PMC 00:1f.3 Audio device: Intel Corporation 100 Series/C230 Series Chipset Family HD Audio Controller (rev 31) Subsystem: Gigabyte Technology Co., Ltd Sunrise Point-H HD Audio 00:1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (re v 31) Subsystem: Gigabyte Technology Co., Ltd Sunrise Point-H SMBus Kernel driver in use: i801_smbus Kernel modules: i2c_i801 02:00.0 PCI bridge: Intel Corporation DSL6540 Thunderbolt 3 Bridge [Alpine Ridge 4C 2015] Kernel driver in use: pcieport 03:00.0 PCI bridge: Intel Corporation DSL6540 Thunderbolt 3 Bridge [Alpine Ridge 4C 2015] Kernel driver in use: pcieport 03:01.0 PCI bridge: Intel Corporation DSL6540 Thunderbolt 3 Bridge [Alpine Ridge 4C 2015] Kernel driver in use: pcieport 03:02.0 PCI bridge: Intel Corporation DSL6540 Thunderbolt 3 Bridge [Alpine Ridge 4C 2015] Kernel driver in use: pcieport 03:04.0 PCI bridge: Intel Corporation DSL6540 Thunderbolt 3 Bridge [Alpine Ridge 4C 2015] Kernel driver in use: pcieport 06:00.0 USB controller: Intel Corporation DSL6540 USB 3.1 Controller [Alpine Rid ge] Subsystem: Device 2222:1111 Kernel driver in use: xhci_hcd 08:00.0 Ethernet controller: Qualcomm Atheros Killer E2400 Gigabit Ethernet Cont roller (rev 10) Subsystem: Gigabyte Technology Co., Ltd Killer E2400 Gigabit Ethernet Co ntroller Kernel driver in use: alx Kernel modules: alx 0a:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Cont roller SM981/PM981/PM983 Subsystem: Samsung Electronics Co Ltd Device a801 Kernel driver in use: nvme Kernel modules: nvme, rsnvme Link to comment
saarg Posted June 8, 2020 Share Posted June 8, 2020 7 minutes ago, Dimtar said: Yes, yes and yes. 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core P rocessor Host Bridge/DRAM Registers (rev 07) Subsystem: Gigabyte Technology Co., Ltd Skylake Host Bridge/DRAM Registe rs Kernel driver in use: skl_uncore 00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06) DeviceName: Onboard IGD Subsystem: Gigabyte Technology Co., Ltd HD Graphics 530 Kernel driver in use: i915 Kernel modules: i915 00:14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31) Subsystem: Gigabyte Technology Co., Ltd Sunrise Point-H USB 3.0 xHCI Con troller Kernel driver in use: xhci_hcd 00:14.2 Signal processing controller: Intel Corporation 100 Series/C230 Series C hipset Family Thermal Subsystem (rev 31) Subsystem: Gigabyte Technology Co., Ltd Sunrise Point-H Thermal subsyste m 00:16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chips et Family MEI Controller #1 (rev 31) Subsystem: Gigabyte Technology Co., Ltd Sunrise Point-H CSME HECI 00:17.0 SATA controller: Intel Corporation Q170/Q150/B150/H170/H110/Z170/CM236 C hipset SATA Controller [AHCI Mode] (rev 31) Subsystem: Gigabyte Technology Co., Ltd Sunrise Point-H SATA controller [AHCI mode] Kernel driver in use: ahci Kernel modules: ahci 00:1b.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #17 (rev f1) Kernel driver in use: pcieport 00:1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #1 (rev f1) Kernel driver in use: pcieport 00:1c.3 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #4 (rev f1) Kernel driver in use: pcieport 00:1c.4 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #5 (rev f1) Kernel driver in use: pcieport 00:1d.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #9 (rev f1) Kernel driver in use: pcieport 00:1d.4 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #13 (rev f1) Kernel driver in use: pcieport 00:1f.0 ISA bridge: Intel Corporation Z170 Chipset LPC/eSPI Controller (rev 31) Subsystem: Gigabyte Technology Co., Ltd Sunrise Point-H LPC Controller 00:1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Fami ly Power Management Controller (rev 31) Subsystem: Gigabyte Technology Co., Ltd Sunrise Point-H PMC 00:1f.3 Audio device: Intel Corporation 100 Series/C230 Series Chipset Family HD Audio Controller (rev 31) Subsystem: Gigabyte Technology Co., Ltd Sunrise Point-H HD Audio 00:1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (re v 31) Subsystem: Gigabyte Technology Co., Ltd Sunrise Point-H SMBus Kernel driver in use: i801_smbus Kernel modules: i2c_i801 02:00.0 PCI bridge: Intel Corporation DSL6540 Thunderbolt 3 Bridge [Alpine Ridge 4C 2015] Kernel driver in use: pcieport 03:00.0 PCI bridge: Intel Corporation DSL6540 Thunderbolt 3 Bridge [Alpine Ridge 4C 2015] Kernel driver in use: pcieport 03:01.0 PCI bridge: Intel Corporation DSL6540 Thunderbolt 3 Bridge [Alpine Ridge 4C 2015] Kernel driver in use: pcieport 03:02.0 PCI bridge: Intel Corporation DSL6540 Thunderbolt 3 Bridge [Alpine Ridge 4C 2015] Kernel driver in use: pcieport 03:04.0 PCI bridge: Intel Corporation DSL6540 Thunderbolt 3 Bridge [Alpine Ridge 4C 2015] Kernel driver in use: pcieport 06:00.0 USB controller: Intel Corporation DSL6540 USB 3.1 Controller [Alpine Rid ge] Subsystem: Device 2222:1111 Kernel driver in use: xhci_hcd 08:00.0 Ethernet controller: Qualcomm Atheros Killer E2400 Gigabit Ethernet Cont roller (rev 10) Subsystem: Gigabyte Technology Co., Ltd Killer E2400 Gigabit Ethernet Co ntroller Kernel driver in use: alx Kernel modules: alx 0a:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Cont roller SM981/PM981/PM983 Subsystem: Samsung Electronics Co Ltd Device a801 Kernel driver in use: nvme Kernel modules: nvme, rsnvme The only GPU detected is the Intel GPU. So you either bought a dead 1050 or you killed it installing it. Link to comment
Dimtar Posted June 8, 2020 Share Posted June 8, 2020 15 minutes ago, saarg said: The only GPU detected is the Intel GPU. So you either bought a dead 1050 or you killed it installing it. Neither of those options are good, I will do a bit more testing and see what I find. Thanks for your time. Link to comment
Pixor Posted June 10, 2020 Share Posted June 10, 2020 (edited) Given that my Quadro 600 is not going to work, can anyone recommend me an inexpensive card to encode for Plex in a docker? Max would be 2 concurrent video streams with 4k 10 bit HDR HEVC. Edited June 10, 2020 by Pixor Link to comment
knalbone Posted June 10, 2020 Share Posted June 10, 2020 6 minutes ago, Pixor said: Given that my Quadro 600 is not going to work, can anyone recommend me an inexpensive card to encode for Plex in a docker? Max would be 2 concurrent video streams with 4k 10 bit HDR HEVC. Quadro P400 should do the trick and can be found on eBay for around $100 Link to comment
Cessquill Posted June 10, 2020 Share Posted June 10, 2020 2 hours ago, Pixor said: Given that my Quadro 600 is not going to work, can anyone recommend me an inexpensive card to encode for Plex in a docker? Max would be 2 concurrent video streams with 4k 10 bit HDR HEVC. I picked up a 1050ti from ebay a year ago for about £90 and it's been perfect for me. Granted, I've only dabbled with 4K content on it so far, but it seems OK. Link to comment
itimpi Posted June 11, 2020 Share Posted June 11, 2020 I use a Palit 1050ti kalmx which works fine for me. One of my requirements was that it should be fanless (and thus silent) which precluded any newer cards I could find. I think you can pick that up on eBay for around £50-£60 at the moment. Link to comment
Remamian Posted June 15, 2020 Share Posted June 15, 2020 Been having issues getting my server to passthrough one GPU to a RTX 2060 to a VM. Every time libvert crash's. I don't have any hardware transcoding on or running. Today I added a Quadro 410 as my primary card for unraid with the RTX 2060 in the other x16 slot and it still crashed. I noticed also today that this plugin is giving me a bunch of errors. I cannot hit do anything in the plugin now, the errors are listed bellow. Warning: file_get_contents(): php_network_getaddresses: getaddrinfo failed: Name or service not known in /usr/local/emhttp/plugins/Unraid-Nvidia/include/exec.php on line 45 Warning: file_get_contents(https://lsio.ams3.digitaloceanspaces.com/?prefix=unraid-nvidia/): failed to open stream: php_network_getaddresses: getaddrinfo failed: Name or service not known in /usr/local/emhttp/plugins/Unraid-Nvidia/include/exec.php on line 45 Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/Unraid-Nvidia/include/exec.php on line 47 Warning: array_keys() expects parameter 1 to be array, null given in /usr/local/emhttp/plugins/Unraid-Nvidia/include/exec.php on line 51 Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/Unraid-Nvidia/include/exec.php on line 51 Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/Unraid-Nvidia/include/exec.php on line 70 Warning: array_multisort(): Argument #3 is expected to be an array or a sort flag in /usr/local/emhttp/plugins/Unraid-Nvidia/include/exec.php on line 73 Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/Unraid-Nvidia/include/exec.php on line 91 Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/Unraid-Nvidia/include/exec.php on line 103 Link to comment
Remamian Posted June 15, 2020 Share Posted June 15, 2020 Ignore me! I fixed it, seemed to be an issue with my network adapter. I added a new card and didnt properly move over my primary static IP to it Link to comment
saarg Posted June 15, 2020 Share Posted June 15, 2020 1 hour ago, Remamian said: Been having issues getting my server to passthrough one GPU to a RTX 2060 to a VM. Every time libvert crash's. I don't have any hardware transcoding on or running. Today I added a Quadro 410 as my primary card for unraid with the RTX 2060 in the other x16 slot and it still crashed. I noticed also today that this plugin is giving me a bunch of errors. I cannot hit do anything in the plugin now, the errors are listed bellow. Warning: file_get_contents(): php_network_getaddresses: getaddrinfo failed: Name or service not known in /usr/local/emhttp/plugins/Unraid-Nvidia/include/exec.php on line 45 Warning: file_get_contents(https://lsio.ams3.digitaloceanspaces.com/?prefix=unraid-nvidia/): failed to open stream: php_network_getaddresses: getaddrinfo failed: Name or service not known in /usr/local/emhttp/plugins/Unraid-Nvidia/include/exec.php on line 45 Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/Unraid-Nvidia/include/exec.php on line 47 Warning: array_keys() expects parameter 1 to be array, null given in /usr/local/emhttp/plugins/Unraid-Nvidia/include/exec.php on line 51 Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/Unraid-Nvidia/include/exec.php on line 51 Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/Unraid-Nvidia/include/exec.php on line 70 Warning: array_multisort(): Argument #3 is expected to be an array or a sort flag in /usr/local/emhttp/plugins/Unraid-Nvidia/include/exec.php on line 73 Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/Unraid-Nvidia/include/exec.php on line 91 Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/Unraid-Nvidia/include/exec.php on line 103 You need to stub the GPU if you want to pass it through to a VM if you have the Nvidia build installed. As soon as you download and overwrite the original unraid build, the drivers will be loaded for the supported GPUs. Link to comment
Remamian Posted June 15, 2020 Share Posted June 15, 2020 (edited) 44 minutes ago, saarg said: You need to stub the GPU if you want to pass it through to a VM if you have the Nvidia build installed. As soon as you download and overwrite the original unraid build, the drivers will be loaded for the supported GPUs. I got the errors all fixed when i properly setup the new Network card. But i still cant get the VM to startup with my GPU. See >> *Edit, with correct link Edited June 15, 2020 by Remamian Link to comment
waymon Posted June 21, 2020 Share Posted June 21, 2020 Hello, Been working on this all morning...started with Space Invaders guide..then followed this thread and everything looks great on my end. Do you guys have any ideas why my transcoding is not being picked up by my m4000? I've also tried setting NVIDIA_VISIBLE_DEVICES = all Link to comment
saarg Posted June 21, 2020 Share Posted June 21, 2020 56 minutes ago, waymon said: Hello, Been working on this all morning...started with Space Invaders guide..then followed this thread and everything looks great on my end. Do you guys have any ideas why my transcoding is not being picked up by my m4000? I've also tried setting NVIDIA_VISIBLE_DEVICES = all Did you enable hardware acceleration in plex settings and do you have plexpass? Link to comment
waymon Posted June 21, 2020 Share Posted June 21, 2020 1 hour ago, saarg said: Did you enable hardware acceleration in plex settings and do you have plexpass? Yes & Yes. Link to comment
ryanhaver Posted June 21, 2020 Share Posted June 21, 2020 @linuxserver.io Thanks for your work on this. I know new builds aren't typically released until a new release of Unraid is available, but there is a fairly serious bug fixed in driver version 450.36.06. Basically the new drive allows a graphics card to return to P-state P8, instead of being stuck at P-state P0. Link to comment
Pducharme Posted June 21, 2020 Share Posted June 21, 2020 @ryanhaver You can do it yourself using the new Unraid-Kernel-Helper docker. That let you build your own version, and you can add the new beta Nvidia driver. 1 Link to comment
saarg Posted June 21, 2020 Share Posted June 21, 2020 3 hours ago, waymon said: Yes & Yes. Then I don't know what is happening. Might want to try if it works using our container. Link to comment
linuxserver.io Posted June 22, 2020 Author Share Posted June 22, 2020 v6.9.0-beta22 being uploaded. 1 6 Link to comment
Recommended Posts