blackbunt Posted September 14, 2020 Share Posted September 14, 2020 20 hours ago, saarg said: The GPU is probably stubbed. Check which module is loaded with lspci -k 04:00.0 VGA compatible controller: NVIDIA Corporation TU116 [GeForce GTX 1650 SUPER] (rev a1) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 3850 Kernel driver in use: nvidia Kernel modules: nvidia_drm, nvidia 04:00.1 Audio device: NVIDIA Corporation TU116 High Definition Audio Controller (rev a1) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 3850 04:00.2 USB controller: NVIDIA Corporation Device 1aec (rev a1) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 3850 Kernel driver in use: xhci_hcd 04:00.3 Serial bus controller [0c80]: NVIDIA Corporation TU116 [GeForce GTX 1650 SUPER] (rev a1) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 3850 Link to comment
saarg Posted September 14, 2020 Share Posted September 14, 2020 2 hours ago, blackbunt said: 04:00.0 VGA compatible controller: NVIDIA Corporation TU116 [GeForce GTX 1650 SUPER] (rev a1) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 3850 Kernel driver in use: nvidia Kernel modules: nvidia_drm, nvidia 04:00.1 Audio device: NVIDIA Corporation TU116 High Definition Audio Controller (rev a1) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 3850 04:00.2 USB controller: NVIDIA Corporation Device 1aec (rev a1) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 3850 Kernel driver in use: xhci_hcd 04:00.3 Serial bus controller [0c80]: NVIDIA Corporation TU116 [GeForce GTX 1650 SUPER] (rev a1) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 3850 What is the actual problem? You only said it doesn't work. Link to comment
blackbunt Posted September 15, 2020 Share Posted September 15, 2020 Card isn’t recognized. Link to comment
RecycledBits Posted September 15, 2020 Share Posted September 15, 2020 (edited) Hi, I am trying to install the drivers on my machine and it just halts after trying to start downloading bzroot-gui. I have tried a few times now and it stalls at the same place each time. When I go back to stock build it download and copies without errors. ***** Now installing Nvidia version 6.8.3 Base URL: https://lsio.ams3.digitaloceanspaces.com/unraid-nvidia/6-8-3/nvidia TO AVOID CORRUPTION DO NOT CLOSE THIS WINDOW UNTIL YOU SEE THE DONE PROMPT Downloading: /tmp/mediabuild/bzimage ... done Downloading: /tmp/mediabuild/bzroot ... done Downloading: /tmp/mediabuild/bzroot-gui ... **** Any idea what the problem might be? Br, EDIT: This seemed to be caused by the DNS server. I use a local installation of Pi-Hole as DNS. After changing to 1.1.1.1 it worked. Edited September 15, 2020 by RecycledBits Found the solution Link to comment
saarg Posted September 15, 2020 Share Posted September 15, 2020 13 hours ago, blackbunt said: Card isn’t recognized. What happens if you runthe below command: watch nvidia-smi Does that work? If it does, then there is a command somewhere in this thread, posted by chbmb, that will show the UUID. Link to comment
blackbunt Posted September 15, 2020 Share Posted September 15, 2020 49 minutes ago, saarg said: What happens if you runthe below command: watch nvidia-smi Does that work? If it does, then there is a command somewhere in this thread, posted by chbmb, that will show the UUID. Output: No devices were found Link to comment
saarg Posted September 16, 2020 Share Posted September 16, 2020 17 hours ago, blackbunt said: Output: No devices were found Then I don't know what could be the problem. You could try to switch slots or try connecting a monitor and see if that helps. Link to comment
blackbunt Posted September 16, 2020 Share Posted September 16, 2020 (edited) 22 hours ago, saarg said: Then I don't know what could be the problem. You could try to switch slots or try connecting a monitor and see if that helps. Switching slots is sadly not possible, got just one. I'll try the monitor option thx! edit: tried different Monitors dp and hdmi-didn‘t work. I also tried a 1660 super - also no luck. It seems somethings wrong with my mobo. Edited September 17, 2020 by blackbunt Link to comment
SpuddyUK Posted September 18, 2020 Share Posted September 18, 2020 Will the next nVidia unRAID release use later drivers than 440.100? I'm looking to resolve a Plex Transcoder power C-State issue that nVidia fixed in > 450.36 Thanks, Link to comment
Roken Posted September 19, 2020 Share Posted September 19, 2020 (edited) Any one have an issue where after transcoding is done the fans on the video card don't stop running? I've noticed unless I restart the Plex container they just continously run. Any idea how to solve this issue besides restarting the container? Nvm, didn't see the above post Edited September 19, 2020 by Roken Link to comment
cryzis Posted September 27, 2020 Share Posted September 27, 2020 (edited) Looking for a little help, I am seeing this within my Jellyfin container. I am passing through the gpu properly, but I enabled a new tone mapping feature that requires OpenCL. This should work right? [AVHWDeviceContext @ 0x561dcd631340] Failed to get number of OpenCL platforms: -1001. Device creation failed: -19. Failed to set value 'opencl=ocl:0.0' for option 'init_hw_device': No such device Error parsing global options: No such device Edited September 27, 2020 by cryzis Link to comment
aptalca Posted September 27, 2020 Share Posted September 27, 2020 2 hours ago, cryzis said: Looking for a little help, I am seeing this within my Jellyfin container. I am passing through the gpu properly, but I enabled a new tone mapping feature that requires OpenCL. This should work right? [AVHWDeviceContext @ 0x561dcd631340] Failed to get number of OpenCL platforms: -1001. Device creation failed: -19. Failed to set value 'opencl=ocl:0.0' for option 'init_hw_device': No such device Error parsing global options: No such device I don't think the image supports opencl. What feature is that? Link to comment
cryzis Posted September 27, 2020 Share Posted September 27, 2020 1 hour ago, aptalca said: I don't think the image supports opencl. What feature is that? This is brand new tone mapping during transcode feature that will be released in the upcoming 10.7.0 release of jellyfin. See PR#3442 . I have been running Jellyfin:unstable and have been waiting to test this out but I guess the image doesn't support OpenCL Link to comment
aptalca Posted September 28, 2020 Share Posted September 28, 2020 4 hours ago, cryzis said: This is brand new tone mapping during transcode feature that will be released in the upcoming 10.7.0 release of jellyfin. See PR#3442 . I have been running Jellyfin:unstable and have been waiting to test this out but I guess the image doesn't support OpenCL We'll look into it. It probably just needs some opencl packages added. We have other images that do that. Link to comment
aptalca Posted September 28, 2020 Share Posted September 28, 2020 4 hours ago, cryzis said: This is brand new tone mapping during transcode feature that will be released in the upcoming 10.7.0 release of jellyfin. See PR#3442 . I have been running Jellyfin:unstable and have been waiting to test this out but I guess the image doesn't support OpenCL Can you exec into the container and install the package "ocl-icd-opencl-dev", restart and see if it works? Link to comment
cryzis Posted September 28, 2020 Share Posted September 28, 2020 18 hours ago, aptalca said: Can you exec into the container and install the package "ocl-icd-opencl-dev", restart and see if it works? I installed "ocl-icd-opencl-dev" into the jellyfin container and restarted. Still seeing the same issue. Link to comment
cryzis Posted September 29, 2020 Share Posted September 29, 2020 3 hours ago, cryzis said: I installed "ocl-icd-opencl-dev" into the jellyfin container and restarted. Still seeing the same issue. Ok I got it working, I added the below repo and used aptitude to install "nvidia-opencl-icd" deb http://deb.debian.org/debian buster-backports main contrib non-free 1 Link to comment
saarg Posted September 29, 2020 Share Posted September 29, 2020 18 hours ago, cryzis said: Ok I got it working, I added the below repo and used aptitude to install "nvidia-opencl-icd" deb http://deb.debian.org/debian buster-backports main contrib non-free It's better to use an ubuntu package since we are using an ubuntu base image. Link to comment
CHBMB Posted September 30, 2020 Share Posted September 30, 2020 v6.9.0 beta29 uploaded. 2 Link to comment
xaositek Posted September 30, 2020 Share Posted September 30, 2020 2 hours ago, CHBMB said: v6.9.0 beta29 uploaded. I just updated and confirmed the build works and Plex HW transcoding is functional. Thank you @CHBMB! Link to comment
MowMdown Posted September 30, 2020 Share Posted September 30, 2020 1 hour ago, xaositek said: I just updated and confirmed the build works and Plex HW transcoding is functional. Thank you @CHBMB! If you have the GPU Plugin installed can you verify that your GPU returns to the lowest P-State (P8) after a transcode? Link to comment
xaositek Posted September 30, 2020 Share Posted September 30, 2020 23 minutes ago, MowMdown said: If you have the GPU Plugin installed can you verify that your GPU returns to the lowest P-State (P8) after a transcode? See attached screenshot - I believe this confirms P8 state after Transcoding. 1 Link to comment
therapist Posted October 1, 2020 Share Posted October 1, 2020 (edited) 14 hours ago, CHBMB said: v6.9.0 beta29 uploaded. can the stable ver 6.8.3 get the latest nvidia drivers? PLEX betas (and likely next stable) now require 450.66 or later drivers to keep nvenc operational -- hw transcoding is broken on latest versions because of this. i prefer to not run betas, so essentially i am stuck on a previous working plex version (1.20.1.3252-1-01) https://www.reddit.com/r/PleX/comments/j0bzu1/it_was_working_before_but_now_im_having_issues/ https://forums.plex.tv/t/help-fixing-my-broken-nvidia-nvenc-driver-config-ubuntu-20-04/637854 https://forums.plex.tv/t/nvenc-hardware-encoding-broken-on-1-20-2-3370/637925 Edited October 1, 2020 by therapist 5 Link to comment
tkenn1s Posted October 4, 2020 Share Posted October 4, 2020 (edited) I just installed 6.9.0-beta29 [haven't run any encode / decode yet] and it looks like my card is in the P0 state after booting. I've attached a screen shot from the GPU plugin. Sorry, really new to this. Is this expected? UPDATE: Just did a HW transcode w/in Plex. As soon as the transcode stopped, the GPU went to P8. Is there a way I can get the GPU to P8 w/o having to run a transcode? Edited October 4, 2020 by tkenn1s Link to comment
tkenn1s Posted October 7, 2020 Share Posted October 7, 2020 On 10/4/2020 at 12:10 PM, tkenn1s said: UPDATE: Just did a HW transcode w/in Plex. As soon as the transcode stopped, the GPU went to P8. Is there a way I can get the GPU to P8 w/o having to run a transcode? Apparently this is expected whenever you're running headless. You can force your GPU into P8 by: Enabling a dummy X-server Installing and running Nvidia's persistenced daemon Toggling persistence mode using nvidia-smi from /boot/config/go I opted for #3 since I didn't want to have a bunch of stuff running just to get to a lower power mode. I added the following to the go file and it now boots into power state P8. # enable nvidia persistence mode if [ -x /usr/bin/nvidia-smi ]; then /usr/bin/nvidia-smi -pm 1 fi 2 Link to comment
Recommended Posts