Jump to content
linuxserver.io

[Plugin] Linuxserver.io - Unraid Nvidia

1655 posts in this topic Last Reply

Recommended Posts

On 11/18/2019 at 5:08 PM, CHBMB said:

 

 

Doesn't build currently on RC6, I think something has changed in the bzroot packaging, as I can reproduce the error merely by unpacking and repacking the stock Unraid bzroot, have messaged @limetech for some advice.

Any updates on this?

Share this post


Link to post

Still doesn't build correctly. 🤣

 

Or so I assume until there new version shows up.

  • Like 1
  • Haha 3

Share this post


Link to post
3 hours ago, sittingmongoose said:

Any updates on this?

No, otherwise I'd have posted something here.....

 

2 hours ago, BRiT said:

Still doesn't build correctly. 🤣

 

Or so I assume until there new version shows up.

@BRiT You're like Sherlock Holmes :D

 

Share this post


Link to post
2 hours ago, CHBMB said:

No, otherwise I'd have posted something here.....

 

@BRiT You're like Sherlock Holmes :D

 

Does that make you Dr. Watson? 😂

Share this post


Link to post
On 11/18/2019 at 6:09 PM, bdarnell said:

Model: Custom

M/B: Gigabyte Technology Co., Ltd. B360M DS3H Version x.x - s/n: Default string

BIOS: American Megatrends Inc. Version F14. Dated: 03/14/2019

CPU: Intel® Core™ i5-9600K CPU @ 3.70GHz

HVM: Enabled

IOMMU: Enabled

Cache: 384 KiB, 1536 KiB, 9216 KiB

Memory: 16 GiB DDR4 (max. installable capacity 64 GiB)

Version 6.8.0-rc5 2019-11-01

Nvidia Driver Version:430.50

GPU 0 Model & Bus:Quadro P2000      01:00.0

GPU 0 UUID:GPU-f5f12578-6b6d-4157-0a44-5f59cb1b9007

I have 2 unraid servers, above are the specs for the one that I cannot get to work with nvidia unraid.  My other server I can get to work just fine.
When I open a terminal and type `watch nvidia-smi` , it just hangs, no output.
When I start the official plexmediaserver docker image with all the settings (spaceinvadersone youtube video) the container just hangs on pending, and locks up the docker service, forcing me to stop and start the Docker service.

What else can I change to get this to work?
Thanks in advance!

Branson

I am not an expert by any stretch of the imagination, but I would rewatch the spaceinvader video and make sure you got it all right. Maybe your unraid is using your p2000 as the main display? Does your motherboard have it's own onboard graphics (your cpu seems to have the built-in graphics)? Do you use the display ports (hdmi/VGA/DP) on your board instead of the card? Spaceinvader does talk about the fact that if something is using the GPU, nothing else will be able to use it. Good luck!

Share this post


Link to post

Good morning!

 

Is there a list available to show what Nvdia Drivers are associated to each of the Unraid builds? 

 

I have an older Nvidia GTX 580 and it isn't supported on 6.7.2 so I may have to roll back. I just don't know how far.

 

Thanks.

Share this post


Link to post
38 minutes ago, TechD87 said:

Good morning!

 

Is there a list available to show what Nvdia Drivers are associated to each of the Unraid builds? 

 

I have an older Nvidia GTX 580 and it isn't supported on 6.7.2 so I may have to roll back. I just don't know how far.

 

Thanks.

If you have the plugin installed you can see what version of drivers would install with what version of unraid, without actually having to go ahead and install it.

Although to answer your question anyway it seems like the versions are:

6.6.7 & 6.7  -  v418.56

6.7.1 & 6.7.2 - v430.14

All versions above (including RC) - v430.50

 

Share this post


Link to post
16 hours ago, huntastikus said:

I am not an expert by any stretch of the imagination, but I would rewatch the spaceinvader video and make sure you got it all right. Maybe your unraid is using your p2000 as the main display? Does your motherboard have it's own onboard graphics (your cpu seems to have the built-in graphics)? Do you use the display ports (hdmi/VGA/DP) on your board instead of the card? Spaceinvader does talk about the fact that if something is using the GPU, nothing else will be able to use it. Good luck!

I am using the onboard video vga to a monitor and can see unraid boot there, nothing is plugged into the p2000 4x display ports.

 

I'll watch the spaceinvaderone videos again , but I do have this working on my other unraid server.

 

Should I roll back the unraid version to a prior 6.8.0rc version?

Share this post


Link to post
21 hours ago, Migz93 said:

If you have the plugin installed you can see what version of drivers would install with what version of unraid, without actually having to go ahead and install it.

Although to answer your question anyway it seems like the versions are:

6.6.7 & 6.7  -  v418.56

6.7.1 & 6.7.2 - v430.14

All versions above (including RC) - v430.50

 

Excellent! Thank you for that! Going back it's confirmed that the GTX 580 will not work on any version. I'm stuck with the P2000. I'll have to find a seperate card to add to do a GPU Passthrough so that I can create a decent computer/gaming rig out of bordem.

Share this post


Link to post
2 minutes ago, TechD87 said:

Excellent! Thank you for that! Going back it's confirmed that the GTX 580 will not work on any version. I'm stuck with the P2000. I'll have to find a seperate card to add to do a GPU Passthrough so that I can create a decent computer/gaming rig out of bordem.

You should be able to pick up a second hand 1050ti (or similar) from Ebay.

Share this post


Link to post
2 hours ago, Cessquill said:

You should be able to pick up a second hand 1050ti (or similar) from Ebay.

I'm sure that I can. Just on a budget right now. The VM is more of a Want vs. Need. I have the P2000 setup to transcode my Plex. Thanks for the suggestion though!

Share this post


Link to post
19 hours ago, bdarnell said:

I am using the onboard video vga to a monitor and can see unraid boot there, nothing is plugged into the p2000 4x display ports.

 

I'll watch the spaceinvaderone videos again , but I do have this working on my other unraid server.

 

Should I roll back the unraid version to a prior 6.8.0rc version?

Do you have any VM's associated to your P2000? I know that I had setup a VM first and was able to do a GPU Passthrough before I even installed the Nvidia Plugin and I was getting an SMI-failed error.

 

If you have a VM setup, make sure that the video is on VNC and auto-start off. 

Share this post


Link to post
On 11/21/2019 at 1:32 PM, bdarnell said:

I am using the onboard video vga to a monitor and can see unraid boot there, nothing is plugged into the p2000 4x display ports.

 

I'll watch the spaceinvaderone videos again , but I do have this working on my other unraid server.

 

Should I roll back the unraid version to a prior 6.8.0rc version?

I would probably get it working with the latest stable (6.7.x) release first before you go into the RC series.

Share this post


Link to post

rc7 not building with the same issue as rc6.

 

Waiting for some advice from LT

 

If I don't post anything else, it's cos I don't have anything to add, no need to ask.

  • Like 1
  • Thanks 5

Share this post


Link to post

hi is this normal for the process on the nvidia when not doing any transcodeing ?

just rebuilt and cant remember seeing the process last time 

 image.png.6283607ea7aee75163d30362fbf4793a.png

Share this post


Link to post
2 minutes ago, andy harris said:

hi is this normal for the process on the nvidia when not doing any transcodeing ?

just rebuilt and cant remember seeing the process last time 

 image.png.6283607ea7aee75163d30362fbf4793a.png

Not normally. But im going to guess you're running with GUI mode enabled?

Share this post


Link to post
15 minutes ago, j0nnymoe said:

Not normally. But im going to guess you're running with GUI mode enabled?

of course what a great big hairy wazock i am 

thanks for the reply 

Share this post


Link to post
Unable to determine the device handle for GPU 0000:04:00.0: Unknown Error

when i run nvidia-smi i get the error above. 

in plugin settings i get my gpu and UUID so all seems good. i running the 6.8.0 RC5 image. 

 

Share this post


Link to post
On 11/22/2019 at 12:09 PM, TechD87 said:

Do you have any VM's associated to your P2000? I know that I had setup a VM first and was able to do a GPU Passthrough before I even installed the Nvidia Plugin and I was getting an SMI-failed error.

 

If you have a VM setup, make sure that the video is on VNC and auto-start off. 

I don't use VM currently, and VM manager is turned off.

Share this post


Link to post

I hope @limetech is able to help these guys out with the build issue since rc-6. The lack of movement is a little disconcerting that a valued community development provider like linuxserver can't get anywhere with them by now.

 

hopefully will be resolved by the time 6.8 goes final. The unfortunate thing is everyone who uses this plugin is stuck on rc-5 which means less eyes on helping out with any bug reporting for later rc's

Share this post


Link to post
1 hour ago, dgreig said:

I hope @limetech is able to help these guys out with the build issue since rc-6. The lack of movement is a little disconcerting that a valued community development provider like linuxserver can't get anywhere with them by now.

 

hopefully will be resolved by the time 6.8 goes final. The unfortunate thing is everyone who uses this plugin is stuck on rc-5 which means less eyes on helping out with any bug reporting for later rc's

Obvious post is obvious.

Share this post


Link to post
11 hours ago, dgreig said:

Pointless snark is pointless

Predictable retort is predictable.

 

Share this post


Link to post

So there won't be an rc6 or rc7 release? I'm compulsively checking 20 times a day, should I stop? Checking?

Is there and way to get notified of new LIO NVIDIA BUILDS?

Edited by Fiservedpi

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.