Jump to content
Sign in to follow this  
GHunter

unRaid server hardware upgrade - FileSvr

3 posts in this topic Last Reply

Recommended Posts

I'm looking to upgrade my unRaid setup from consumer level hardware to server / workstation level hardware. My main reasons for doing an upgrade are more CPU cores, more memory (I also want to use ECC memory), VM stability, and proper IOMMU grouping (I don't want to use PCIe ACS Override). My current setup is in my signature and it works well, but thanks to @limetech , I'm using my unRaid server for much more than I ever imagined 😊. I plan on using my old hardware as a backup unRaid server.

 

My needs are as follows:

 

  1. Ability to run 4 video cards, 2 of which are single slot PCIe x1 cards and the 2 others are dual slot PCIe x16 cards. I also need 2 free slots for my HBA and network cards, both of which are PCIe x4.
  2. Onboard GPU or the ability to run headless.
  3. 10 or more USB connectors.
  4. ECC memory.

 

I'm thinking of the following hardware to upgrade my server:

 

  • CPU's: 2 @ Intel Xeon E5-2687W v3 which will give me 20 cores.
  • Coolers: Need 2 CPU coolers but not sure what to get. Looking for cheap but reliable and lower noise coolers.
  • MB: Supermicro X10DAX
  • Memory: 64Gig ECC
  • PSU: EVGA SuperNOVA 1300 G2 1300 Watts

 

I currently run 4 VM's and 11 docker containers full time and want the ability to run 2 more VM's full time. 4 of the VM's will use GPU passthrough.

 

I'd like comments or suggestions on my planned upgrade. Particularly if I can stop using PCIe ACS Override and if I can run this setup headless. I will most likely need 1 or 2 PCIe riser or ribbon cable extensions as well but not sure which ones or where to get them (I live in the USA) and I still need to choose CPU coolers.

 

Thanks!

Edited by GHunter

Share this post


Link to post

Ended up purchasing a Supermicro X10DAC instead of the X10DAX because it has an onboard LSI HBA. Still looking on ebay for the CPU's and memory and hope to find and purchase them this week or early next week.

Share this post


Link to post
Posted (edited)

I haven't had any luck getting a decent price on 2 Intel Xeon E5-2687W v3 processors so I had to go with 2 Intel Xeon E5-2667 v3 processors instead. They are 8 core CPU's so I lost a few cores over my original plan but on the bright side, they were cheap and they run a little faster at a base clock speed of 3.2 GHz.

 

For the CPU coolers, I picked up 2 Cooler Master Hyper 212 EVOs. I've seen other people use them in their server builds and they should fit in my 4U case.

 

Now I need to order my memory and a few miscellaneous items and plan on getting this built in 2 to 3 weeks! Luckily memory prices have dropped and I found 64 gigs of ECC memory for $290 at Newegg.

Edited by GHunter

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this