[REQUEST] Meshcentral


chip

Recommended Posts

Appreciate it!

Configuration:

Name: MeshcCentral
Repository: uldiseihenbergs/meshcentral
WebUI: http://[IP]:[PORT:466]/
Network Type: Bridge
Console shell command: Shell
Privileged: Off
Port: Container 80, Host 82, TCP
Port (UI): Container 8443, Host 455, TCP
Port (Agents): Container 443, Host 466, TCP
Path (Data): Container /home/node/meshcentral/meshcentral-data, Host /mnt/user/appdata/meshcentral/data/, Read/Write
Path (Files): Container /home/node/meshcentral/meshcentral-files, Host /mnt/user/appdata/meshcentral/files/, Read/Write
Path (Web): Container /home/node/meshcentral/meshcentral-web, /mnt/user/appdata/meshcentral/web/, Read/Write
Path (Backup): Container /home/node/meshcentral/meshcentral-backup, /mnt/user/appdata/meshcentral/backup/, Read/Write

 

If the log you refer to is the one linked to in the unRAID UI, then this is the contents: (If there's another within the docker, let me know where it exists and I will fetch it!)

Installing [email protected]...
Installing [email protected]...
MeshCentral HTTP redirection server running on port 80.
MeshCentral v0.7.50, LAN mode.
Server has no users, next new account will be site administrator.
MeshCentral HTTPS server running on port 443.

 

I have removed the container/image and deleted it's folder in appdata and recreated it (with the above settings) and the result was the same.

Link to comment

Apologies!
I thought I had manually tried that previously, and hadn't realized the listing in unRAID was still incorrect.

I can reach the webUI now.
Thank you for your patience.

Edit: Got this all set up and had a single issue- Remote sessions would disconnect after about a minute. To resolve this I followed the advice given here.

Quote

...[add] the following line in the settings section of config.json

"AgentPong": 50,

 

Edited by Ruthalas
Added way to resolve another issue.
  • Like 1
Link to comment
  • 3 months later...

I'm trying to get this running but still can't reach the WebUI.

 

Installing [email protected]...
Installing [email protected]...
MeshCentral HTTP redirection server running on port 80.
Generating certificates, may take a few minutes...
Generating root certificate...
Generating HTTPS certificate...
Generating MeshAgent certificate...
Generating Intel AMT MPS certificate...
MeshCentral v0.8.16, LAN mode.
Server has no users, next new account will be site administrator.
MeshCentral HTTPS server running on port 443.

 

Docker Template in attached screenshots

eggf.jpg

fgfgf.jpg

Link to comment
  • 4 weeks later...
On 6/6/2021 at 4:19 AM, tjustice86 said:

I don't see any files under my meshcentral-data folder unless I check from within the container itself.

then it's something wrong with volume mapping. all config files should be accessible by host in mapped folder.

Link to comment
  • 1 year later...

I tried the community app but I am having some problems?

 

Uploading files does not get uploaded to the files folder?

image.thumb.png.a3c0df97714d8dfd1e7a51f3d6da8314.png

Also windows share shows the folder strange? "M6U1...."

image.thumb.png.8b84dc768d85144e70a319dc63ab1d41.png

Also changing the port number breaks the "open webui" on the Unraid docker menu (But thats a smaller problem)

 

 

 

Edited by casperse
Link to comment
  • 9 months later...

I don't know, if it's the right place to post this, but I'll give it a try. 

A few weeks ago I stumbled upon MeshCentral and I am deeply impressed. The functionality is awesome! 

 

Now, that the number of my agents is reaching 100, I want to change the database to an external one, as recommended. 

Should be very easy, you start MeshCentral with the parameter "--dbexport", change the database in the config and start MeshCentral with the parameter "--dbimport". 

 

But how do I do this in unraid? I searched the web and tried several things in the terminal, but nothing works. 

Any suggestions on that? 

Any help is greatly appreciated!

 

Edit: 

Found the answer by myself! It has to be done in the running Docker Container via terminal. If anyone needs to know how, feel free to contact me. 

Edited by Bladeinger
Solution found
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.