February 14, 20197 yr I'm having a problem getting this card up and running in my Unraid box. The card is detected, however I'm getting the "Interface Ethernet Port 1 is down. Check cable!" Anyone got some ideas? The card is plugged into a Aruba S2500 via a DAC (I've tried my other DAC as well) Edited February 21, 20197 yr by plupien79
February 14, 20197 yr Community Expert These are plug and play, you just need to configure the IPv4 address, to automatic or static.
February 14, 20197 yr Author Plug and play doesn't seem to be working. Says cable unplugged. Have tried both DACs, switch sees the DAC but the unraid box just keeps telling me cable unplugged.
February 14, 20197 yr Community Expert Then there's a problem somewhere, with the NIC, the cable or the switch. Just recently got an used dual port Connect-X 3 that I had to send back to the seller since both ports didn't link up.
February 14, 20197 yr Author Got a couple Known good DACs from work. Gonna give those a try. Does anyone have any idea if we can use the Mellonox tools in unraid?
February 21, 20197 yr Author I found that switch is touchy with DACs. I bought transceivers and fiber and am now happily cruising at 10G. https://www.arubanetworks.com/support-services/interoperability/#SFP-XFP That's the link with the compatibility table. Edited February 21, 20197 yr by plupien79 Added Link
Archived
This topic is now archived and is closed to further replies.