February 20, 20197 yr when i try to clear my 6tb hard drive it fills up the log cache to 100% this drive passed a full extended test and a erase with western digital data diagnostic but in HD Tune it has a C7 interface cfc error count of 11730 which i fault was done because i had a cable gong bad my question is this when i try and preclear it my log goes upto 100% has this only happens on this drive also if i check the preview i can see some errors or warrings but its so fast im not sure what it says is this drive ok to use
February 20, 20197 yr Community Expert 31 minutes ago, gavin_UK said: is this drive ok to use Is this a question? If so we have no idea without Diagnostics.
February 20, 20197 yr Community Expert Go to Tools - Diagnostics and attach the complete diagnostics zip to your next post. Diagnostics includes SMART report for all attached disks whether they are assigned or not.
February 21, 20197 yr Author abyss-diagnostics-20190220-2359.zip please ignore Disk 5 im waiting on a replacment 10 TB
February 21, 20197 yr Community Expert SMART for that disk looks OK. Probably bad connection or cable as you said.
February 21, 20197 yr Community Expert SMART attributes look OK but there are recent media read errors (UNC at LBA): Error 395 [10] occurred at disk power-on lifetime: 24138 hours (1005 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 53 06 aa 20 40 00 Error: UNC at LBA = 0x5306aa20 = 1392945696 You should run an extended SMART test.
February 21, 20197 yr Author 3 hours ago, johnnie.black said: SMART attributes look OK but there are recent media read errors (UNC at LBA): Error 395 [10] occurred at disk power-on lifetime: 24138 hours (1005 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 53 06 aa 20 40 00 Error: UNC at LBA = 0x5306aa20 = 1392945696 You should run an extended SMART test. any idea what drive that is
February 21, 20197 yr Community Expert The one you were asking about: Device Model: WDC WD60EFRX-68MYMN1 Serial Number: WD-WX31D847KYKF
February 21, 20197 yr Author can the test take some time as its been on self-test in progress 10% complete for sometime now
February 21, 20197 yr Community Expert Estimated time is in the SMART report: Extended self-test routine recommended polling time: ( 709) minutes.
February 22, 20197 yr Author done abyss-smart-20190221-2232.zip is this drive ok to use Edited February 22, 20197 yr by gavin_UK
February 22, 20197 yr Community Expert SMART test completely successfully, so it's good for now, but previous errors are not a good sign, keep an eye on it.
Archived
This topic is now archived and is closed to further replies.