February 23, 20197 yr I have a 8TB parity drive and my drive #5 (6TB) has the error message Device is Disabled, contents emulated and has a red cross and no temprature. How do I proceed so I lose non of my data?
February 23, 20197 yr Author 9 hours ago, Squid said: Post diagnostics so we can see the status of the disk itself. dianogstics.zip
February 23, 20197 yr Community Expert Nest time please post the complete diagnostics, but the disk looks fine, some CRC errors, so there could be a bad SATA cable or they could be old errors, if the emulated disk is mounting correctly you can rebuild on top of the old disk, though using a spare is safer in case something goes wrong during the rebuild.
February 23, 20197 yr Author 44 minutes ago, johnnie.black said: Nest time please post the complete diagnostics, but the disk looks fine, some CRC errors, so there could be a bad SATA cable or they could be old errors, if the emulated disk is mounting correctly you can rebuild on top of the old disk, though using a spare is safer in case something goes wrong during the rebuild. I switched the SATA cable. and no change. How do I rebuild on top of the old disk? I tried google, but cant find it. I dont have a spare, and Im willing to take the chance. I thought I posted the entire diagnostics, I just pressed Diagnostics and it downloaded that .zip file, how do I post the entire thing? (For next time) Sorry but my knowledge is limited Edited February 23, 20197 yr by SkyHead
February 23, 20197 yr Community Expert Just now, SkyHead said: How do I rebuild on top of the old disk? https://wiki.unraid.net/Troubleshooting#Re-enable_the_drive 1 minute ago, SkyHead said: I thought I posted the entire diagnostics, I just pressed Diagnostics and it downloaded that .zip file No you didn't, at least not those from tools -> diagnostics
February 23, 20197 yr Author 6 minutes ago, johnnie.black said: https://wiki.unraid.net/Troubleshooting#Re-enable_the_drive No you didn't, at least not those from tools -> diagnostics You're absolutely right, something happened when I renamed the file... Rebuilding disk now, if it is succesful, will I lose any data?
February 23, 20197 yr Community Expert 2 minutes ago, SkyHead said: if it is succesful, will I lose any data? No, did you check the emulated disk was mounting? Or now the rebuilding disk.
February 23, 20197 yr Author 1 minute ago, johnnie.black said: No, did you check the emulated disk was mounting? Or now the rebuilding disk. Total size:6 TB Elapsed time:6 minutes Current position:47.5 GB (0.8 %) Estimated speed:131.2 MB/sec Estimated finish: Rebuilding now, and it mounted fine when I turned it off and on in the array Edited February 23, 20197 yr by SkyHead
Archived
This topic is now archived and is closed to further replies.