ccsnet Posted March 10, 2019 Share Posted March 10, 2019 So first off I believe the issue is usb as I have mostly speed issues non!after what docker or script I use. It's beyond frustrating as after 3 months of moving to unraid I still do not have a working backup. I put in a usb 3 card but that does seem to act about the same as using the on board host. I've tried xfs ...NTFS.... Etc I've tried new cables and PSU s I've tried using a cache drive for temp files to prevent parity slowing backups After many hours of researching and going down multiple routes including caching I'm out of ideas. Ps to those that have helped me elsewhere thank you but I think usb transfer speeds is the core of the issue. tbmaindoma-diagnostics-20190310-1720.zip Quote Link to comment
John_M Posted March 10, 2019 Share Posted March 10, 2019 It isn't obvious from your post what you're trying to achieve and how it's causing you frustration. But to answer the question in the title - yes, if there are a lot of them. Quote Link to comment
ccsnet Posted March 10, 2019 Author Share Posted March 10, 2019 Hi and thanks for responding. It was 5 files about 200mb each (duplicati created). In short any operations realting to transfer files to my usb 3 connected drive is far too slow. Eg duplicati reports it's copying in bytes and not mega bytes speed. Script copies seem to be as slow too. These are drives that used to backup ok under windows server as well so I'm relatively happy the hard ware is ok. I've checked lsusb and the correct drivers and speed seem to be in place. Terran Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.