bluepr0 Posted March 19, 2019 Share Posted March 19, 2019 (edited) Hello! I've been taking a look at the unRAID wiki and doesn't explain too much about how to create a bonding, only how the different modes works. I've followed steps on Settings > Network Settings (check image attached) but I'm unsure if this is the correct setup. As you can see have I have "bond0" for eth0 and "bond1" for eth1. I'm unable to select eth0 and eth1 inside the option "Bonding members of bond0" for example (of course tried this with array stopped). My thinking was that you would have a "bond0" interface and inside of this you would get all the interfaces you wanted to be bonded, eth0 and eth1 in my case. Do I have this setup correctly? Or this is plain wrong? Thanks! Edited March 19, 2019 by bluepr0 Quote Link to comment
bluepr0 Posted March 27, 2019 Author Share Posted March 27, 2019 Shameless bump in case someone can throw some light Quote Link to comment
ken-ji Posted March 27, 2019 Share Posted March 27, 2019 Haven't messed with bonding for a long while, but you want to turn bonding off on eth1, so that it becomes available for bonding with eth0 1 Quote Link to comment
xxbigfootxx Posted June 7, 2022 Share Posted June 7, 2022 @ken-ji Thank you, that helped me. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.