Fiala06 Posted March 22, 2019 Share Posted March 22, 2019 I've been unable to figure this one out. I get this almost every time I stop my array to do some maintenance. The machine locks up. This mean anything to anyone? I'm on 6.6.6 and details are in my signature. Thanks for any tips! Quote Link to comment
JorgeB Posted March 22, 2019 Share Posted March 22, 2019 Trace looks related to an Aquantia NIC, any difference if you temporarily disabled it? Quote Link to comment
Fiala06 Posted March 22, 2019 Author Share Posted March 22, 2019 Interesting I’ll give that try! Quote Link to comment
Fiala06 Posted March 22, 2019 Author Share Posted March 22, 2019 (edited) Well seems to have helped but ran into a different issue now. It's just stuck on "Array stopping Retry unmounting disk shares". I even stopped Docker and VMs in settings before trying to stop the array. Tried a unclean shutdown and stopping array again, same thing. Edited March 22, 2019 by Fiala06 Quote Link to comment
JorgeB Posted March 22, 2019 Share Posted March 22, 2019 3 minutes ago, Fiala06 said: It's just stuck on "Array stopping" Retry mounting disk shares. That means there's something in use not letting Unraid unmount the disk, e.g., an SSH session using a mounted folder is enough to cause that. Quote Link to comment
Fiala06 Posted March 22, 2019 Author Share Posted March 22, 2019 1 minute ago, johnnie.black said: That means there's something in use not letting Unraid unmount the disk, e.g., an SSH session using a mounted folder is enough to cause that. Is there a command or something I can put in to see what is being used? None of my computer and devices are on except my unraid box. No ssh sessions, movies etc. Quote Link to comment
JorgeB Posted March 22, 2019 Share Posted March 22, 2019 Wait for the force shutdown timeout, default is 60 seconds and Unraid should download the diags to the flash drive, then post them here, the reason might be visible there. Quote Link to comment
Fiala06 Posted March 22, 2019 Author Share Posted March 22, 2019 Ok I'll have to wait until this evening to check out the flash drive. I'm at work. It's been on array stopping for over 20mins at this point. Quote Link to comment
Fiala06 Posted March 22, 2019 Author Share Posted March 22, 2019 (edited) I did just find this: Mar 22 11:44:36 UNRAID root: Active pids left on /dev/md* Mar 22 11:44:36 UNRAID root: Generating diagnostics... Mar 22 11:44:38 UNRAID emhttpd: Unmounting disks... Mar 22 11:44:38 UNRAID emhttpd: shcmd (694): umount /mnt/cache Mar 22 11:44:38 UNRAID root: umount: /mnt/cache: target is busy. Mar 22 11:44:38 UNRAID emhttpd: shcmd (694): exit status: 32 Mar 22 11:44:38 UNRAID emhttpd: Retry unmounting disk share(s)... Mar 22 11:44:43 UNRAID emhttpd: Unmounting disks... Mar 22 11:44:43 UNRAID emhttpd: shcmd (695): umount /mnt/cache Mar 22 11:44:43 UNRAID root: umount: /mnt/cache: target is busy. Mar 22 11:44:43 UNRAID emhttpd: shcmd (695): exit status: 32 Mar 22 11:44:43 UNRAID emhttpd: Retry unmounting disk share(s)... So something with my cache. I'm running mover now just to see if that helps. Edit: After some fiddling I ran "New Permissions". Took about 45mins but once complete the array stopped! Not sure if it was a fluke yet or not but so far so good. Oh and disabling my built in 10g eth solved the original issue. Edited March 22, 2019 by Fiala06 Fixed (fingers crossed) Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.