wyleekiot Posted March 23, 2019 Share Posted March 23, 2019 (edited) just updated from 6.53 to 6.6.7 and i get this message at bottom and my entire screen is blank except for the unraid header picture. no menus no buttons no logs nothing... Edited March 23, 2019 by wyleekiot solved Quote Link to comment
wyleekiot Posted March 23, 2019 Author Share Posted March 23, 2019 Looking at monitor connected directly to server it seems it booted properly. Even says it's on 6.6.7 and lists it's IP however below that it says. Tower login: sh: /usr/local/emhttp/plugins/dynamic.docker.manager/scripts/dockerconfig.php: no such file or directory sh: /usr/local/emhttp/plugins/dynamic.vm.manager/scripts/libvirtconfig.php: no such file or directory I'm thinking I deleted something I shouldn't have. When I ran the pre-update check utility it said dynamic was bad and I needed to delete it... I'm guessing it was a dirty liar? Quote Link to comment
wyleekiot Posted March 23, 2019 Author Share Posted March 23, 2019 just tried to make a new bootable usb drive to pull the dynamix files off it... there are none. im at a loss now, not sure where to go next. Quote Link to comment
Squid Posted March 23, 2019 Share Posted March 23, 2019 10 hours ago, wyleekiot said: When I ran the pre-update check utility it said dynamic was bad and I needed to delete it... I'm guessing it was a dirty liar? There's a file called dynamix.plg in /config/plugins on the flash drive which it wants you to delete Quote Link to comment
wyleekiot Posted March 23, 2019 Author Share Posted March 23, 2019 (edited) so how do i get the dynamix files requested above back in place? while looking for the dynamix plugin to install it to the boot drive i found a bunch of bergware dynamix plugins - Active Streams, Cache Dirs, S3 Sleep, System Info, System Stats, System Temp, System AutoFan, Schedules, System Buttons, Local Master, SSD TRIM, File Integrity, SCSI Devices, Date Time, Stop Shell, Day Night. i dont believe i ever installed any of those plugins but its been running for nearly 5 years now so i could be mistaken. i thought for sure i found it when i stumbled across https://github.com/limetech/dynamix. but when looking in the scripts folders the libvirtconfig.php and dockerconfig.php arent in the scripts folders. If they are not on the boot drive when you set it up and its not in one of those plugins where might i find it. would it be possible to reinstall the https://github.com/limetech/dynamix package and it will build the missing files? Edited March 23, 2019 by wyleekiot Quote Link to comment
Squid Posted March 23, 2019 Share Posted March 23, 2019 11 minutes ago, wyleekiot said: i thought for sure i found it when i stumbled across https://github.com/limetech/dynamix. but when looking in the scripts folders the libvirtconfig.php and dockerconfig.php arent in the scripts folders. That's an ancient link. The up-to-date github is https://github.com/limetech/webgui 12 minutes ago, wyleekiot said: If they are not on the boot drive when you set it up and its not in one of those plugins where might i find it. They're part of the bzimage etc files on the flash drive, and only exist in ram. 13 minutes ago, wyleekiot said: while looking for the dynamix plugin to install it to the boot drive You don't want to do this. Have you deleted /config/plugins/dynamix.plg from the flash drive as FCP asked you to do? Quote Link to comment
wyleekiot Posted March 23, 2019 Author Share Posted March 23, 2019 (edited) i renamed all the dynamix files/folders from {filename} to Delete{filename}Delete. i normally do that when mucking around in stuff above my paygrade so that if(when) i screw up i can just remove the "delete" on each side and im good. however that didnt help in this case... the files are really gone from those folders. i just deleted dynamix.plg and sure enough unraid came up perfectly. so i gather that on booting up everything in that plugins folder gets run regardless of name? so my trying to remedy a potential issue caused a immediate issue? Edited March 23, 2019 by wyleekiot Quote Link to comment
Squid Posted March 23, 2019 Share Posted March 23, 2019 All .plg files are installed at bootup regardless of its name. Quote Link to comment
wyleekiot Posted March 23, 2019 Author Share Posted March 23, 2019 You da man squid! thank you so much for your help my array is degraded from a disk fail and im trying to get preclears done on 2 new ones so im a little nervous about doing too much atm to begin with. one last question...how do i put the [solved] tag on subject, is that a mod function? Quote Link to comment
JonathanM Posted March 23, 2019 Share Posted March 23, 2019 17 minutes ago, wyleekiot said: how do i put the [solved] tag on subject, is that a mod function? Edit the very first post in this thread, and change the subject. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.