Drazzilb Posted January 27, 2016 Share Posted January 27, 2016 Doh, for some reason i had it selected on advanced view. Brought to you by linuxserver.io ----------------------------------- GID/UID ----------------------------------- User uid: 99 User gid: 100 ----------------------------------- We are now refreshing packages from apt repositorys, this *may* take a while Update: OK MOD Default {} {} MOD Default {} {} MOD Default {} {} MOD Default {} {} Jan 26 21:15:28 Tower syslog-ng[98]: syslog-ng starting up; version='3.5.3' Jan 26 21:17:01 Tower /USR/SBIN/CRON[116]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) This is it. Quote Link to comment
CHBMB Posted January 27, 2016 Share Posted January 27, 2016 I can't pull the container right now as docker hub is down for me, but it looks like you've restarted the container since the initial pull, as it should pull more data on initial setup I think. I'd try deleting appdata and container, keep the config as /mnt/cache/appdata not /mnt/user/appdata and try again tbh. Quote Link to comment
Drazzilb Posted January 27, 2016 Share Posted January 27, 2016 I'l give that a whirl! Quote Link to comment
CHBMB Posted January 27, 2016 Share Posted January 27, 2016 I'l give that a whirl! And monitor the logs when it's started and post them here. Quote Link to comment
Drazzilb Posted January 27, 2016 Share Posted January 27, 2016 I'l give that a whirl! And monitor the logs when it's started and post them here. The log was quite long. I didn't think you needed all the other information. However, I attached everything that was in the log in the hopes of figuring this out. OpenVPN-Log.txt Quote Link to comment
CHBMB Posted January 27, 2016 Share Posted January 27, 2016 So what happens when you go to https://192.168.0.21:943/admin Quote Link to comment
Drazzilb Posted January 27, 2016 Share Posted January 27, 2016 Tried that already. Same thing Quote Link to comment
CHBMB Posted January 27, 2016 Share Posted January 27, 2016 Try a different browser? The logs indicate it's starting up fine. Maybe clear out your browser cache. Quote Link to comment
Drazzilb Posted January 27, 2016 Share Posted January 27, 2016 Normally use Google Chrome, Tried internet explorer. Nothing With either https://192.168.0.21:943/admin'>https://192.168.0.21:943/admin or https://192.168.0.21:943 Quote Link to comment
CHBMB Posted January 27, 2016 Share Posted January 27, 2016 Did you definitely delete the appdata folder? The logs say it detected a previous install... Quote Link to comment
Drazzilb Posted January 27, 2016 Share Posted January 27, 2016 I did.. I will try once more to delete everything again in the appdata folder and reinstall once more Heck, 5th time might be a charm IMAGE ID [ed5b2c683805]: Pulling fs layer. IMAGE ID [6aa7ddadb702]: Pulling fs layer. IMAGE ID [984d25cfa696]: Pulling fs layer. IMAGE ID [b7f2604ab9e5]: Pulling fs layer. IMAGE ID [4bfab0db1692]: Pulling fs layer. IMAGE ID [5f2921e35144]: Pulling fs layer. IMAGE ID [d6974464b3be]: Pulling fs layer. IMAGE ID [c0e10379547f]: Pulling fs layer. IMAGE ID [428b411c28f0]: Already exists. IMAGE ID [435050075b3f]: Already exists. IMAGE ID [9fd3c8c9af32]: Already exists. IMAGE ID [6d4946999d4f]: Already exists. IMAGE ID [f6e250afd5cc]: Already exists. IMAGE ID [80c1ef08f5e9]: Already exists. IMAGE ID [29ae179a0774]: Already exists. IMAGE ID [fdcdf46f55d4]: Already exists. IMAGE ID [29f816c37c5d]: Already exists. IMAGE ID [56077f313773]: Already exists. IMAGE ID [6f51c68ba38d]: Already exists. IMAGE ID [e25ab9b3fa88]: Already exists. IMAGE ID [ab025b65d47b]: Already exists. IMAGE ID [3b424cc7863c]: Already exists. IMAGE ID [da990b323adb]: Already exists. IMAGE ID [db696d16a024]: Already exists. Even though i removed everything from the folders and removed the image and container. I still get this part when installing it. Edit: After the reinstall again.. NO luck.. Quote Link to comment
j0nnymoe Posted January 27, 2016 Share Posted January 27, 2016 I will be setting up our openvpn-as docker soon so I will do a test run on it yo make sure its not an issue with the docker. Quote Link to comment
CHBMB Posted January 27, 2016 Share Posted January 27, 2016 Just tried it, came straight up for me. Quote Link to comment
czealley Posted January 27, 2016 Share Posted January 27, 2016 im having the same issue. when trying to load the gui it i get 'page is not available". confirmed docker is set to Host. When i change it to bridge it does work . I have tried removing and deleting the data, and confirmed its installed to /mnt/cache. still no go. please help Quote Link to comment
j0nnymoe Posted January 27, 2016 Share Posted January 27, 2016 Just set this up here. Webui has booted up fine. Fresh install. openvpn-as.txt Quote Link to comment
CHBMB Posted January 27, 2016 Share Posted January 27, 2016 im having the same issue. when trying to load the gui it i get 'page is not available". confirmed docker is set to Host. When i change it to bridge it does work . I have tried removing and deleting the data, and confirmed its installed to /mnt/cache. still no go. please help Can you post a screenshot of your docker config and some logs... Quote Link to comment
Drazzilb Posted January 27, 2016 Share Posted January 27, 2016 Yeah I've tried it bridged and the normal set up with no luck soon curious as well. Quote Link to comment
CHBMB Posted January 27, 2016 Share Posted January 27, 2016 Yeah I've tried it bridged and the normal set up with no luck soon curious as well. Other than mapping the appdata the template is setup as "Good to Go" Quote Link to comment
Drazzilb Posted January 27, 2016 Share Posted January 27, 2016 Yeah that's what I though which is weird why I'm having issues. Wonder if it's something I have set up elsewhere. Quote Link to comment
CHBMB Posted January 27, 2016 Share Posted January 27, 2016 Yeah that's what I though which is weird why I'm having issues. Wonder if it's something I have set up elsewhere. Unless you've installed a different OpenVPN server app previously I wouldn't have thought so... Quote Link to comment
Drazzilb Posted January 27, 2016 Share Posted January 27, 2016 Nope. Not that I'm aware of. Quote Link to comment
czealley Posted January 28, 2016 Share Posted January 28, 2016 im having the same issue. when trying to load the gui it i get 'page is not available". confirmed docker is set to Host. When i change it to bridge it does work . I have tried removing and deleting the data, and confirmed its installed to /mnt/cache. still no go. please help Can you post a screenshot of your docker config and some logs... Thanks but i worked out that issue. I had to add variable 'INTERFACE' to 'br0'. I have a different issue now however which i can only think the fact its in a docker to be the reason. Basically i have gone through https://docs.openvpn.net/how-to-tutorialsguides/virtual-platforms/site-to-site-layer-3-routin-using-openvpn-access-server/ to setup a site to site. It all connects fine and the client side can access any machine on the server side, however no machine on the server side (unraid side) can access the client. I have configured routing on my gateway (asus n66u router) confirmed using tracert that it gets to the unraid ip address then stops. Quote Link to comment
raidoo Posted January 28, 2016 Share Posted January 28, 2016 Hi, thanks for this. Is there a way to change the admin password through the docker webui or through the unraid webui? Thanks again. Quote Link to comment
CHBMB Posted January 28, 2016 Share Posted January 28, 2016 Hi, thanks for this. Is there a way to change the admin password through the docker webui or through the unraid webui? Thanks again. It's in the readme on docker hub and github. Links on first post in this thread. Quote Link to comment
j0nnymoe Posted January 28, 2016 Share Posted January 28, 2016 Hi, thanks for this. Is there a way to change the admin password through the docker webui or through the unraid webui? Thanks again. You change it via the OpenVPN-AS webui Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.