Teknoclown Posted June 10, 2019 Share Posted June 10, 2019 Im having issues with the docker image since upgrading to UnRaid 6.7. I am running OpenVPN As version 2.7.4. I believe my setting are correct, and once connected I can access my UnRaid Servers and Dockers. However, after I disconnect, I have to restart the OpenVPN Docker to reconnect. It perpetually gets stuck in Tunnelblick until I restart the container and then it works for a single connection again. Below are my settings. Any help would be appreciated. Quote Link to comment
thebruce87m Posted June 10, 2019 Share Posted June 10, 2019 Does anyone have a link to the most up to date installation instructions? I keep finding space invader videos but they seem out of date - i.e. they show an INTERFACE variable in the setup that apparently doesn’t exist any more. Apologies if this is a common question but the OP doesn’t seem to get updated with this kind of information. Quote Link to comment
aptalca Posted June 10, 2019 Share Posted June 10, 2019 58 minutes ago, thebruce87m said: Does anyone have a link to the most up to date installation instructions? I keep finding space invader videos but they seem out of date - i.e. they show an INTERFACE variable in the setup that apparently doesn’t exist any more. Apologies if this is a common question but the OP doesn’t seem to get updated with this kind of information. Perhaps read the documentation? On github or docker hub Quote Link to comment
aptalca Posted June 10, 2019 Share Posted June 10, 2019 3 hours ago, Teknoclown said: Im having issues with the docker image since upgrading to UnRaid 6.7. I am running OpenVPN As version 2.7.4. I believe my setting are correct, and once connected I can access my UnRaid Servers and Dockers. However, after I disconnect, I have to restart the OpenVPN Docker to reconnect. It perpetually gets stuck in Tunnelblick until I restart the container and then it works for a single connection again. Below are my settings. Any help would be appreciated. Return all those values to the defaults. Only add your lan subnet to the routing section Quote Link to comment
Teknoclown Posted June 11, 2019 Share Posted June 11, 2019 6 hours ago, aptalca said: Return all those values to the defaults. Only add your lan subnet to the routing section It worked perfectly. I should have thought of just doing a clean install and trying that route. Thanks for the help. Quote Link to comment
thebruce87m Posted June 11, 2019 Share Posted June 11, 2019 8 hours ago, aptalca said: Perhaps read the documentation? On github or docker hub Thanks for your answer. I can’t seem to see any unraid specific documentation in those places. Things like bridge mode vs host settings. Am I missing it? 1 Quote Link to comment
CHBMB Posted June 11, 2019 Share Posted June 11, 2019 2 hours ago, thebruce87m said: Thanks for your answer. I can’t seem to see any unraid specific documentation in those places. Things like bridge mode vs host settings. Am I missing it? Bridge vs host settings are available on Unraid there's a switch in each template. Unraids docker implementation is nothing special. Documentation applies regardless. Quote Link to comment
Der_Eine Posted June 11, 2019 Share Posted June 11, 2019 (edited) Hi, I got some problems with the openvpn docker on my unraid 6.7.0 Server. On the photos you can see my configuration and the log. My webbrowser says: ERR_CONNECTION_REFUSED What can I do? Edited June 13, 2019 by Der_Eine Quote Link to comment
Der_Eine Posted June 16, 2019 Share Posted June 16, 2019 No one knows a solution? I tried anything and now I am really at the end... Quote Link to comment
Squid Posted June 16, 2019 Share Posted June 16, 2019 With all the No such file or directory errors, you should post your docker run command Quote Link to comment
Kesp Posted June 17, 2019 Share Posted June 17, 2019 Has anyone figured out how to either get alerts when someone connects (notifies via email) or if there are login attempts? Quote Link to comment
Kesp Posted June 17, 2019 Share Posted June 17, 2019 On 6/11/2019 at 8:47 AM, Der_Eine said: Hi, I got some problems with the openvpn docker on my unraid 6.7.0 Server. On the photos you can see my configuration and the log. My webbrowser says: ERR_CONNECTION_REFUSED What can I do? I had had a similar issue. For me it occurred when I updated the OpenVPN-as container. I had to do a clean install (removed docker container and erased the OpenVPN-as folder from my appdata share), reinstalled and that fixed the problem. Quote Link to comment
Spoonsy1480 Posted June 23, 2019 Share Posted June 23, 2019 I’m having trouble setting this upI get this I cannot find the OpenVPN file to download for my client set up?Sent from my iPhone using Tapatalk Quote Link to comment
Squid Posted June 23, 2019 Share Posted June 23, 2019 10 minutes ago, Spoonsy1480 said: I get this I cannot find the OpenVPN file to download for my client set up? Been quite awhile since I've used this app (have switched to a different method of connecting remotely), but after you set up the user etc via the admin login, don't you just login locally as the appropriate user and then download the .ovpn file there and then move it to the applicable device? Quote Link to comment
Spoonsy1480 Posted June 23, 2019 Share Posted June 23, 2019 Been quite awhile since I've used this app (have switched to a different method of connecting remotely), but after you set up the user etc via the admin login, don't you just login locally as the appropriate user and then download the .ovpn file there and then move it to the applicable device?I cannot find the ovpn file to download Sent from my iPhone using Tapatalk Quote Link to comment
Squid Posted June 23, 2019 Share Posted June 23, 2019 Doesn't it just download via the browser? Quote Link to comment
Spoonsy1480 Posted June 23, 2019 Share Posted June 23, 2019 Doesn't it just download via the browser?Where from?Sent from my iPhone using Tapatalk Quote Link to comment
Squid Posted June 23, 2019 Share Posted June 23, 2019 Did you login as the admin or as the user you want the opvn for? Quote Link to comment
Squid Posted June 23, 2019 Share Posted June 23, 2019 ok. The UI has very significantly changed in the last 4 months since I last used this. Quote Link to comment
Spoonsy1480 Posted June 23, 2019 Share Posted June 23, 2019 Was trying to Goto the admin page again,It’s working now but how do I connect with my unRAID GUI Sent from my iPhone using Tapatalk Quote Link to comment
Hoopster Posted June 23, 2019 Share Posted June 23, 2019 1 hour ago, Spoonsy1480 said: I cannot find the ovpn file to download Sent from my iPhone using Tapatalk Login from the OpenVPN WebUI I logged in as the user for whom I want the .ovpn profile configured and clicked on the link at the bottom. I then imported the downloaded .ovpn file into the client on my laptops and mobile devices which need access through Open VPN. Quote Link to comment
ProZac Posted June 23, 2019 Share Posted June 23, 2019 1 hour ago, Spoonsy1480 said: Was trying to Goto the admin page again, It’s working now but how do I connect with my unRAID GUI Sent from my iPhone using Tapatalk You need to add the subnet of your unraid server to the settings in openvpn routing info. If you get stuck, there are several posts and images in the last few pages as this started happening in the last update Quote Link to comment
boragthung Posted June 24, 2019 Share Posted June 24, 2019 To get to the user (non-admin) interface you need to use this address: https://unraidipaddress:943/?src=connect I would then bookmark this. Quote Link to comment
ProZac Posted June 24, 2019 Share Posted June 24, 2019 1 hour ago, boragthung said: To get to the user (non-admin) interface you need to use this address: https://unraidipaddress:943/?src=connect I would then bookmark this. Or just open the gui from docker page, then change out /admin for /client in the adr bar Quote Link to comment
aptalca Posted June 24, 2019 Share Posted June 24, 2019 5 hours ago, boragthung said: To get to the user (non-admin) interface you need to use this address: https://unraidipaddress:943/?src=connect I would then bookmark this. Just the naked domain will suffice, without /admin at the end This is all in official openvpn-as documentation by the way Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.