aptalca Posted October 28, 2020 Share Posted October 28, 2020 1 hour ago, Andreas76 said: Yes, you need to open the port on your router. Default port for openvpn is 1194 unless you stated something else And it's udp (by default) 1 Quote Link to comment
jang430 Posted November 1, 2020 Share Posted November 1, 2020 Hi. I was able to successfully open ports, and connect via VPN. My question is, how do I get to access Unraid? I assume I currently cannot since I get a different set of IPs once connected via VPN. Quote Link to comment
Andreas76 Posted November 1, 2020 Share Posted November 1, 2020 You can access it via IP address. I do not know how to get the DNS to resolve. Im hoping there is a way Quote Link to comment
jang430 Posted November 2, 2020 Share Posted November 2, 2020 12 hours ago, Andreas76 said: You can access it via IP address. I do not know how to get the DNS to resolve. Im hoping there is a way Unfortunately, I cannot. The IP address of the existing network is 192.168.x.x. Upon connecting via VPN, I get IP addess of 172.x.x.x (can't remember what exactly). Quote Link to comment
aptalca Posted November 2, 2020 Share Posted November 2, 2020 2 hours ago, jang430 said: Unfortunately, I cannot. The IP address of the existing network is 192.168.x.x. Upon connecting via VPN, I get IP addess of 172.x.x.x (can't remember what exactly). That's correct. You need to enter your network subnet in the gui settings for it to nat Quote Link to comment
jang430 Posted November 2, 2020 Share Posted November 2, 2020 9 hours ago, aptalca said: That's correct. You need to enter your network subnet in the gui settings for it to nat is this on the server settings? Quote Link to comment
aptalca Posted November 2, 2020 Share Posted November 2, 2020 6 hours ago, jang430 said: is this on the server settings? Yes 1 Quote Link to comment
MyCaptainMyKing Posted November 3, 2020 Share Posted November 3, 2020 (edited) On 4/2/2020 at 5:15 AM, SeaMax said: Hello, I have two problems with openvpn-as: FIRST PROBLEM i've also got the Error SESSION ERROR: SESSION: Your session has expired, please reauthenticate (9007) and I am at a loss of what exactly i have to do to fix it. My setup: (1) I've installed the openvpn-as container in bridge mode - i set up another user name (also with admin access), then login as said user and delete the standard admin user. (2) I switch the network mode in the container to a custom proxynet (nginx setup from spaceinvader video) so that i can reach my openvpn user and admin login from anywhere (3) i edit the as.config file entry "boot_pam_users.0=" and put random characters in, so that my admin acc is not accesible if it was reset during switching of dhe network mode (4) i go to my web interface login of openvpn: openvpn.***.* -> it opens to the user login page -> i can login as my created user (5) i go to openvpn.***.*/admin it opens to the admin login page -> i get said error on login attempt with my created admin user Now, people linked to this POST a couple of posts back. There it says, regarding error solution: " 1. iptables issues on host (either not installed or missing kernel modules) 2. you didn’t add cap-add NET_ADMIN 3. you’re using an unsupported networking method (host or macvlan) " 1) i do not know what this means or what i have to check and possible fix 2) i've checked in advanced view, docker container is still created with "cap-add NET_ADMIN" 3) i do not know exactly what this means, is it possible that you cannot run openvpn on a custom setup unraid network (in my case "proxynet" and letsencrypt) - does it only run on "bridge" mode? SECOND PROBLEM Maybe related to first problem. With my setup (as explained above) i can go on my mobile, go to my openvpn domain and download the access file for the mobile openvpn client. BUT when i try to connect to my openvpn server the connection times out. Openvpn is configured on UDP 1194 and i've forwarded this port to my unraid server (as per spaceinvaders video). Any idea what could prevent it from getting a connection? Thanks for the people reading this and in general developing this container. I got it to work there, is a weird bug. I changed the network to the host when you first setup the docker. So you have to delete all the files on the share before you start over, after you start the server let it start compiling the files then edit the docker and change the network type back to Bridge mode. Then do all the normal setup and when you get to user management it should not error out. There is a bug with then network info. because when I did the host first it gave me a different ip of the docker and then put my Ip rang into the host. that's how I realized it changed. I hope this helped. Edited November 3, 2020 by MyCaptainMyKing Quote Link to comment
jang430 Posted November 10, 2020 Share Posted November 10, 2020 On 12/29/2015 at 6:41 AM, CHBMB said: Try docker exec -it openvpn-as passwd admin obviously change passwd to whatever you want the password to be. Hi. I'm trying to change password for admin. I have never executed any commands such as the line above "docker exec -it openvpn-as passwd admin" Where do I execute this command? Quote Link to comment
Kesp Posted November 23, 2020 Share Posted November 23, 2020 On 2/27/2020 at 2:20 PM, saarg said: What do you mean by usb pass through the vpn? Do you mean that you want to pass through a usb network adapter to the container? Sorry for the delayed response. Fairly new to unraid/Linux. I was trying to get the following set up: Server A hosts OpenVPN, separately runs Windows VM and can connect remotely with client B. With Remote Desktop when I plug in usb/keyboard to client B I want it to appear on windows VM. Anyway to do that with OpenVPN? Or is this an Remote Desktop issue. Quote Link to comment
saarg Posted November 23, 2020 Share Posted November 23, 2020 9 hours ago, Kesp said: Sorry for the delayed response. Fairly new to unraid/Linux. I was trying to get the following set up: Server A hosts OpenVPN, separately runs Windows VM and can connect remotely with client B. With Remote Desktop when I plug in usb/keyboard to client B I want it to appear on windows VM. Anyway to do that with OpenVPN? Or is this an Remote Desktop issue. That has nothing to do with a VPN. Of you connect using remote desktop to another Windows computer, you use the mouse/keyboard on the client. But this you should ask for in the VM sub forum. Quote Link to comment
luca2 Posted November 24, 2020 Share Posted November 24, 2020 Hi, how can I find the version of openvpn-as running in this dockker? Quote Link to comment
Hoopster Posted November 24, 2020 Share Posted November 24, 2020 28 minutes ago, luca2 said: Hi, how can I find the version of openvpn-as running in this dockker? Log into the WebUI Quote Link to comment
Kesp Posted November 28, 2020 Share Posted November 28, 2020 On 11/23/2020 at 9:51 AM, saarg said: That has nothing to do with a VPN. Of you connect using remote desktop to another Windows computer, you use the mouse/keyboard on the client. But this you should ask for in the VM sub forum. It’s more about port forwarding. The program virtualhere that works when in network but not over OpenVPN, anyway to adjust settings/anyone know alternatives to get this to work. Quote Link to comment
Hikakiller Posted December 8, 2020 Share Posted December 8, 2020 On 10/6/2015 at 1:36 PM, linuxserver.io said: If you are not using Unraid (and you should be!) then please do not post here, instead head to linuxserver.io to see how to get support. Sorry to bother, but I'm running this docker and on every update it resets everything. Originally on every update it was only resetting the password to the admin account, which was annoying... but now if I update I have to completely redo everything and since I haven't memorized my config settings it's pretty annoying. Do you have any suggestions? Quote Link to comment
Hoopster Posted December 8, 2020 Share Posted December 8, 2020 9 hours ago, Hikakiller said: Do you have any suggestions? Yes, I suggest you read the Github or Dockerhub documentation linked in the first post of this thread. In the Application Setup section it tells you specifically what to do to prevent the admin account from resetting every time the container is updated. 😁 Quote Link to comment
nrcsantos Posted December 11, 2020 Share Posted December 11, 2020 I have been struggling with a fresh installation of this... Everything seems to work fine but when i try to access the 'User Permissions' or 'Group Permissions' with my admin account i got: Sorry, a session error has occurred It is possible that your session has expired or your login credentials do not allow access to this resource. See error text below for further details: SESSION ERROR: '__DEFAULT__': internet/defer:151,admin/auserperm:1528,admin/auserperm:1488,admin/auserperm:1009 (exceptions.KeyError) Any ideas? Thank you all, Quote Link to comment
xxbigfootxx Posted December 17, 2020 Share Posted December 17, 2020 I've tried installing this about 5/6 times but i don't get the option for WebGUI for some reason? I've enabled privileged mode and changed between Bridge and Host but still nothing. Quote Link to comment
Roosta078 Posted December 24, 2020 Share Posted December 24, 2020 I installed about 5 months ago with no issues. Due to some unrelated issues, I needed to uninstall the docker container. When trying to reinstall, I am not able to get any connections to the server. I used https://www.yougetsignal.com/tools/open-ports/ to see if the port was exposed, it returned as closed. I have port forwarding set up and other ports are being forwarded correctly. I have verified that I am pointing the application to the right port, it just seems that the application isn't reading/responding to the packets. I suspect there could be issues due to lingering files from my prior install (I did remove the directory that is mapped to /config). If anyone has experience with this, or any ideas, please let me know. Quote Link to comment
Electrohacker Posted December 28, 2020 Share Posted December 28, 2020 So this was working just fine earlier this month, then I noticed my plex transcodeing stopped working so I updated to the latest unraid version so I could use nvidia driver. now I notice my openvpn isnt working anymore. I tried uninstalling the reinstalling (since the docker returned to default settings anyhow... which is weird) and I still cannot connect. all the other services seem to work just fine and I am using pfsense as my router and yes I forwarded 1194, and 9443. Quote Link to comment
Roosta078 Posted December 29, 2020 Share Posted December 29, 2020 9 hours ago, Electrohacker said: So this was working just fine earlier this month, then I noticed my plex transcodeing stopped working so I updated to the latest unraid version so I could use nvidia driver. now I notice my openvpn isnt working anymore. I tried uninstalling the reinstalling (since the docker returned to default settings anyhow... which is weird) and I still cannot connect. all the other services seem to work just fine and I am using pfsense as my router and yes I forwarded 1194, and 9443. This seems to be similar to my issue, see prior post. I have recently updated plex as well, and now can no longer get openvpn to work. At what step in the connection process do your clients get hung up on? Quote Link to comment
Electrohacker Posted December 29, 2020 Share Posted December 29, 2020 11 hours ago, Roosta078 said: This seems to be similar to my issue, see prior post. I have recently updated plex as well, and now can no longer get openvpn to work. At what step in the connection process do your clients get hung up on? "A non-recoverable error occurred during a database lookup." I assume that is a blocked port like you are stating. Right now I am somewhat bypassing the issue by using apache guacamole to get into my win10VM on the server, in fact this post is from that VM. Quote Link to comment
Zotarios Posted January 17, 2021 Share Posted January 17, 2021 I neither can't see the port even being open. I think that the docker is not really running the openvpn server. Docker logs: https://pastebin.com/Tw87t1F1 Shouldn't the port 1194 be listed in here? sudo lsof -i -P -n | grep LISTEN rpcbind 2091 rpc 8u IPv4 16702 0t0 TCP *:111 (LISTEN) rpcbind 2091 rpc 11u IPv6 16705 0t0 TCP *:111 (LISTEN) rpc.statd 2096 rpc 9u IPv4 9798 0t0 TCP *:59245 (LISTEN) rpc.statd 2096 rpc 11u IPv6 9802 0t0 TCP *:55001 (LISTEN) docker-pr 4424 root 4u IPv6 119630 0t0 TCP *:1443 (LISTEN) docker-pr 4436 root 4u IPv6 124152 0t0 TCP *:180 (LISTEN) smbd 7518 root 31u IPv6 52665 0t0 TCP *:445 (LISTEN) smbd 7518 root 32u IPv6 52666 0t0 TCP *:139 (LISTEN) smbd 7518 root 33u IPv4 52667 0t0 TCP *:445 (LISTEN) smbd 7518 root 34u IPv4 52668 0t0 TCP *:139 (LISTEN) wsdd 7530 root 4u IPv6 59485 0t0 TCP *:3702 (LISTEN) Plex\x20M 8919 nobody 60u IPv4 64577 0t0 TCP *:32400 (LISTEN) Plex\x20M 8919 nobody 61u IPv4 64579 0t0 TCP 127.0.0.1:32401 (LISTEN) Plex\x20S 9377 nobody 8u IPv4 65639 0t0 TCP 127.0.0.1:41925 (LISTEN) Plex\x20T 11137 nobody 13u IPv4 61812 0t0 TCP 127.0.0.1:32600 (LISTEN) Plex\x20S 11206 nobody 7u IPv4 56056 0t0 TCP 127.0.0.1:44049 (LISTEN) Plex\x20S 11206 nobody 8u IPv4 53041 0t0 TCP *:33400 (LISTEN) Plex\x20S 11206 nobody 10u IPv4 53042 0t0 TCP *:33443 (LISTEN) docker-pr 15245 root 4u IPv6 74902 0t0 TCP *:3579 (LISTEN) docker-pr 17076 root 4u IPv6 73157 0t0 TCP *:8181 (LISTEN) sshd 19410 root 3u IPv4 21983 0t0 TCP *:22 (LISTEN) sshd 19410 root 4u IPv6 21985 0t0 TCP *:22 (LISTEN) inetd 19420 root 5u IPv4 23894 0t0 TCP *:21 (LISTEN) apcupsd 19452 root 5u IPv4 11232 0t0 TCP *:3551 (LISTEN) libvirtd 21117 root 14u IPv4 30883 0t0 TCP 127.0.0.1:16509 (LISTEN) dnsmasq 21223 nobody 6u IPv4 34493 0t0 TCP 192.168.122.1:53 (LISTEN) unbalance 21804 root 6u IPv6 34583 0t0 TCP *:6237 (LISTEN) unbalance 21804 root 7u IPv6 31025 0t0 TCP *:6238 (LISTEN) nginx 21842 root 9u IPv4 27022 0t0 TCP *:80 (LISTEN) nginx 21842 root 10u IPv6 27023 0t0 TCP *:80 (LISTEN) nginx 21843 root 9u IPv4 27022 0t0 TCP *:80 (LISTEN) nginx 21843 root 10u IPv6 27023 0t0 TCP *:80 (LISTEN) docker-pr 25847 root 4u IPv6 700670 0t0 TCP *:9443 (LISTEN) docker-pr 25874 root 4u IPv6 695698 0t0 TCP *:943 (LISTEN) Quote Link to comment
rohram04 Posted January 23, 2021 Share Posted January 23, 2021 I have a reverse proxy run through swag (perviously known as letsencrypt) for my own domain name. Currently lets-encrypt and most of the containers I access through that domain are on the reverse proxy BUT my openvpn container is not on the reverse proxy network. It is on the bridge network. Is there any way to direct all traffic to my openvpn subdomain to the normal bridge network instead of the proxy network? I know the easiest solution would be to just put my openvpn container on the reverse proxy network but I don't want it on the reverse proxy for security reasons. Maybe this is the wrong thread for this; If so, it would be great if you could direct me to the appropriate thread. Thank You. Quote Link to comment
SimplifyAndAddCoffee Posted February 14, 2021 Share Posted February 14, 2021 Is this docker still supported? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.