April 7, 20197 yr Hello, Installed ASUS XG-C100C 10GBe NIC which I can confirm is not defective as tested in a Windows 10 system. After booting with Unraid Version 6.7.0-rc7 2019-04-03 the 10G NIC is not recognized and there is no LED activity on the card (CAT 7 installed). Attached Syslog. Any tricks to enabled the NIC? Gigabyte Technology Co., Ltd. X470 AORUS GAMING 7 WIFI-CF, Version x.x American Megatrends Inc., Version F8 BIOS dated: Fri 25 Jan 2019 12:00:00 AM MST Thanks, Kat syslog.txt
April 7, 20197 yr It should be plug and play, but please post the diagnostics instead: Tools -> Diagnostics
April 7, 20197 yr Taking a punt here... I noticed you have an m.2 nvme installed, double check it's not in the slot (M2B_SOCKET) that shares bandwidth by the x4 slot, which I assume is where the NIC is installed). This would cause the NIC not to be detected, on the off chance the config changed slightly from when you had it running in win10.
April 7, 20197 yr Author 6 hours ago, tjb_altf4 said: Taking a punt here... I noticed you have an m.2 nvme installed, double check it's not in the slot (M2B_SOCKET) that shares bandwidth by the x4 slot, which I assume is where the NIC is installed). This would cause the NIC not to be detected, on the off chance the config changed slightly from when you had it running in win10. I bet that's the problem! Forgot about the nvme and possibly sharing bandwidth with the same slot the 10G NIC is installed. I will try to move it later today and see if that solves it. Manual shows - The PCIEX4 slot becomes unavailable when a device is installed in the M2B_SOCKET connector. Otherwise will post Diagnostic Logs. Thanks, Kat Edited April 7, 20197 yr by meerkat154
April 7, 20197 yr Author Moving the NIC helped. Socket was disabled due to M.2. Thank you tjb_altf4, Kat
Archived
This topic is now archived and is closed to further replies.