Skip to content
View in the app

A better way to browse. Learn more.
Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Unraid Summer Sale in live: 20% off Starter and Unleashed + buy one, get one 50% off

LACP on Quad Card

ximian
in Hardware

Featured Replies

So  here is my issue and I believe this may be a bug in version 6.7.0-rc7.   I have a quad card which I setup 2 interfaces in vLAN500 (eth1,eth2) and the other pair on  vLAN600 (eth3,eth4). Each are setup with 802.3ad.  The bondings are bond1 and the other bond3.  When I setup the Bonding and the interfaces everything works perfectly.  eth2 shows pairing with mac of eth1 and eth4 shows pairing with mac of eth3.

 

The minute I reboot, bond1 never comes up. After looking at possible suspects I finally saw the issue, the eth2 mac is not binding on eth1 but on it's own mac. This should not be happening. 

 

Please advise if anyone had this issue and if resolved or any other possible paths I can try.

 

Thanks

  • Quote

    • Archived

    This topic is now archived and is closed to further replies.

    Go to topic listing

    Account

    Navigation

    Search

    Search

    Configure browser push notifications
    Chrome (Android)
    1. Tap the lock icon next to the address bar.
    2. Tap Permissions → Notifications.
    3. Adjust your preference.
    Chrome (Desktop)
    1. Click the padlock icon in the address bar.
    2. Select Site settings.
    3. Find Notifications and adjust your preference.