ximian Posted April 7, 2019 Share Posted April 7, 2019 So here is my issue and I believe this may be a bug in version 6.7.0-rc7. I have a quad card which I setup 2 interfaces in vLAN500 (eth1,eth2) and the other pair on vLAN600 (eth3,eth4). Each are setup with 802.3ad. The bondings are bond1 and the other bond3. When I setup the Bonding and the interfaces everything works perfectly. eth2 shows pairing with mac of eth1 and eth4 shows pairing with mac of eth3. The minute I reboot, bond1 never comes up. After looking at possible suspects I finally saw the issue, the eth2 mac is not binding on eth1 but on it's own mac. This should not be happening. Please advise if anyone had this issue and if resolved or any other possible paths I can try. Thanks Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.